Hi all,
On Tue, Oct 16, 2012 at 2:15 PM, Vivek Gautam <gautam.vivek@xxxxxxxxxxx> wrote:
> We are removing plat data which was used till now to init and
> exit phy. We no longer need this since dwc3-core takes care of
> initializing and shutting-down the phy using usb_phy_init()
> and usb_phy_shutdown().
>
> Signed-off-by: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
Any thoughts on this please ?
> ---
> drivers/usb/dwc3/dwc3-exynos.c | 16 ----------------
> 1 files changed, 0 insertions(+), 16 deletions(-)
>
> diff --git a/drivers/usb/dwc3/dwc3-exynos.c b/drivers/usb/dwc3/dwc3-exynos.c
> index d11ef49..5a2a73f 100644
> --- a/drivers/usb/dwc3/dwc3-exynos.c
> +++ b/drivers/usb/dwc3/dwc3-exynos.c
> @@ -92,7 +92,6 @@ static u64 dwc3_exynos_dma_mask = DMA_BIT_MASK(32);
>
> static int __devinit dwc3_exynos_probe(struct platform_device *pdev)
> {
> - struct dwc3_exynos_data *pdata = pdev->dev.platform_data;
> struct platform_device *dwc3;
> struct dwc3_exynos *exynos;
> struct clk *clk;
> @@ -150,14 +149,6 @@ static int __devinit dwc3_exynos_probe(struct platform_device *pdev)
>
> clk_enable(exynos->clk);
>
> - /* PHY initialization */
> - if (!pdata) {
> - dev_dbg(&pdev->dev, "missing platform data\n");
> - } else {
> - if (pdata->phy_init)
> - pdata->phy_init(pdev, pdata->phy_type);
> - }
> -
> ret = platform_device_add_resources(dwc3, pdev->resource,
> pdev->num_resources);
> if (ret) {
> @@ -174,9 +165,6 @@ static int __devinit dwc3_exynos_probe(struct platform_device *pdev)
> return 0;
>
> err4:
> - if (pdata && pdata->phy_exit)
> - pdata->phy_exit(pdev, pdata->phy_type);
> -
> clk_disable(clk);
> clk_put(clk);
> err3:
> @@ -192,7 +180,6 @@ err0:
> static int __devexit dwc3_exynos_remove(struct platform_device *pdev)
> {
> struct dwc3_exynos *exynos = platform_get_drvdata(pdev);
> - struct dwc3_exynos_data *pdata = pdev->dev.platform_data;
>
> platform_device_unregister(exynos->dwc3);
> platform_device_unregister(exynos->usb2_phy);
> @@ -200,9 +187,6 @@ static int __devexit dwc3_exynos_remove(struct platform_device *pdev)
>
> dwc3_put_device_id(exynos->dwc3->id);
>
> - if (pdata && pdata->phy_exit)
> - pdata->phy_exit(pdev, pdata->phy_type);
> -
> clk_disable(exynos->clk);
> clk_put(exynos->clk);
>
> --
> 1.7.6.5
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-usb" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Thanks & Regards
Vivek
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
