Re: Fwd: Re: USB question

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun, 21 Oct 2012, Charlie Sager wrote:

> ok, here is the output from lsusb -v
> just the device in question.
> 
> ================
> 
> Bus 002 Device 002: ID 1808:5555
> Couldn't open device, some information will be missing
> Device Descriptor:
>    bLength                18
>    bDescriptorType         1
>    bcdUSB               1.01
>    bDeviceClass            0 (Defined at Interface level)
>    bDeviceSubClass         0
>    bDeviceProtocol         0
>    bMaxPacketSize0         8
>    idVendor           0x1808
>    idProduct          0x5555
>    bcdDevice            0.01
>    iManufacturer           1
>    iProduct                2
>    iSerial                 0
>    bNumConfigurations      1
>    Configuration Descriptor:
>      bLength                 9
>      bDescriptorType         2
>      wTotalLength           41
>      bNumInterfaces          1
>      bConfigurationValue     1
>      iConfiguration          4
>      bmAttributes         0xc0
>        Self Powered
>      MaxPower              100mA
>      Interface Descriptor:
>        bLength                 9
>        bDescriptorType         4
>        bInterfaceNumber        0
>        bAlternateSetting       0
>        bNumEndpoints           2
>        bInterfaceClass         3 Human Interface Device
>        bInterfaceSubClass      0 No Subclass
>        bInterfaceProtocol      0 None
>        iInterface              0
>          HID Device Descriptor:
>            bLength                 9
>            bDescriptorType        33
>            bcdHID               1.00
>            bCountryCode            0 Not supported
>            bNumDescriptors         1
>            bDescriptorType        34 Report
>            wDescriptorLength      37
>           Report Descriptors:
>             ** UNAVAILABLE **
>        Endpoint Descriptor:
>          bLength                 7
>          bDescriptorType         5
>          bEndpointAddress     0x81  EP 1 IN
>          bmAttributes            3
>            Transfer Type            Interrupt
>            Synch Type               None
>            Usage Type               Data
>          wMaxPacketSize     0x0008  1x 8 bytes
>          bInterval              10
>        Endpoint Descriptor:
>          bLength                 7
>          bDescriptorType         5
>          bEndpointAddress     0x02  EP 2 OUT
>          bmAttributes            3
>            Transfer Type            Interrupt
>            Synch Type               None
>            Usage Type               Data
>          wMaxPacketSize     0x0008  1x 8 bytes
>          bInterval              10

In case Peter's comment was unclear...

The reason there is no /dev/ttyUSB* node associated with this device is 
because the device does not have a serial interface.  It has only a 
Human Interface Device (HID) interface, which means it behaves more 
like a keyboard than like a serial port.

Alan Stern

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux