These two patches add DT support to ehci-orion and convert all existing Kirkwood DT boards to using DT to instantiate the USB host. v1->v2: Remove the phy property from DT. The previous implementation was not compatible with the new ideas of a USB phy node. Only orion5x needs it anyway, and currently converting orion5x to DT is low priority. Adding a phy node later will also not affect backwards compatibility. Andrew Lunn (2): ARM: Kirkwood: ehci-orion: Add device tree binding ARM: Kirkwood: Convert all DT boards to EHCI via DT. .../devicetree/bindings/usb/ehci-orion.txt | 15 ++++++++ arch/arm/boot/dts/kirkwood.dtsi | 7 ++++ arch/arm/mach-kirkwood/board-dnskw.c | 1 - arch/arm/mach-kirkwood/board-dockstar.c | 1 - arch/arm/mach-kirkwood/board-dreamplug.c | 1 - arch/arm/mach-kirkwood/board-dt.c | 1 + arch/arm/mach-kirkwood/board-goflexnet.c | 1 - arch/arm/mach-kirkwood/board-ib62x0.c | 1 - arch/arm/mach-kirkwood/board-iconnect.c | 1 - arch/arm/mach-kirkwood/board-iomega_ix2_200.c | 2 -- arch/arm/mach-kirkwood/board-km_kirkwood.c | 1 - arch/arm/mach-kirkwood/board-lsxl.c | 1 - arch/arm/mach-kirkwood/board-ts219.c | 1 - drivers/usb/host/ehci-orion.c | 38 ++++++++++++++++++-- 14 files changed, 58 insertions(+), 14 deletions(-) create mode 100644 Documentation/devicetree/bindings/usb/ehci-orion.txt -- 1.7.10.4 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
