This patchset updates the ehci-platform.c driver to allow device tree probing. I have dropped support for the three function pointers (power_on, power_off and power_suspend). If someone has knowledge of the power sequence functions that are being implemented, these functions could be replaced (Sorry, I don't know anything about implementing it). port_power_(on_off) properties are not supported in DT as Alan Stern indicated they are going to be removed. I have included a binding document, but must admit most of the descriptions for the properties are guessed. Quite likely some of these descriptions are incorrect and/or need to be clarified. Tony Prisk (2): USB: Update EHCI-platform driver to devicetree. USB: doc: Binding document for ehci-platform driver .../devicetree/bindings/usb/ehci-platform.txt | 22 +++ drivers/usb/host/ehci-hcd.c | 5 - drivers/usb/host/ehci-platform.c | 46 ++++++ drivers/usb/host/ehci-vt8500.c | 171 -------------------- 4 files changed, 68 insertions(+), 176 deletions(-) create mode 100644 Documentation/devicetree/bindings/usb/ehci-platform.txt delete mode 100644 drivers/usb/host/ehci-vt8500.c -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
