On Mon, Oct 08, 2012 at 12:25:48PM -0700, Gary E. Miller wrote: > Yo All! > > I reported last month that when I plug a USB 1.1 or USB 2.0 device into > my Etron USB 3.0 controller (xHCI) the device will not work. The > failure message is always: > > [ 28.338599] usb 8-2.4: Not enough bandwidth for new device state. > [ 28.338613] usb 8-2.4: can't set config #1, error -28 > > Same thing when I plug directly into the USB 3.0 or insert a USB 3.0 hub > in the middle. > > Same thing now on kernels 3.6.0 and 3.6.1. Thanks for retesting. > Any new ideas? Have you tried to see if there's a firmware update for your Etron host controller? The error you're getting seems to me to indicate a hardware issue, and I'm really not sure how to solve it. > Cards with the Etron chip on them are $14 on newegg. I'd be happy to > buy one for anyone that wants to see the problem up close and personal. Money's not really the issue for me, it's time... Sarah Sharp -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
