The EHCI platform driver is suitable for use by the Netlogic XLR platform
since there is nothing specific that the EHCI XLR platform driver does.
Signed-off-by: Florian Fainelli <florian@xxxxxxxxxxx>
---
No changes in v3
Changes in v2:
- really change driver name to "ehci-platform"
- slightly reworded commit message
arch/mips/netlogic/xlr/platform.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/arch/mips/netlogic/xlr/platform.c b/arch/mips/netlogic/xlr/platform.c
index 71b44d8..144c5c6 100644
--- a/arch/mips/netlogic/xlr/platform.c
+++ b/arch/mips/netlogic/xlr/platform.c
@@ -15,6 +15,7 @@
#include <linux/serial_8250.h>
#include <linux/serial_reg.h>
#include <linux/i2c.h>
+#include <linux/usb/ehci_pdriver.h>
#include <asm/netlogic/haldefs.h>
#include <asm/netlogic/xlr/iomap.h>
@@ -123,8 +124,12 @@ static u64 xls_usb_dmamask = ~(u32)0;
}, \
}
+static struct usb_ehci_pdata xls_usb_ehci_pdata = {
+ .caps_offset = 0,
+};
+
static struct platform_device xls_usb_ehci_device =
- USB_PLATFORM_DEV("ehci-xls", 0, PIC_USB_IRQ);
+ USB_PLATFORM_DEV("ehci-platform", 0, PIC_USB_IRQ);
static struct platform_device xls_usb_ohci_device_0 =
USB_PLATFORM_DEV("ohci-xls-0", 1, PIC_USB_IRQ);
static struct platform_device xls_usb_ohci_device_1 =
@@ -172,6 +177,7 @@ int xls_platform_usb_init(void)
memres = CPHYSADDR((unsigned long)usb_mmio);
xls_usb_ehci_device.resource[0].start = memres;
xls_usb_ehci_device.resource[0].end = memres + 0x400 - 1;
+ xls_usb_ehci_device.dev.platform_data = &xls_usb_ehci_pdata;
memres += 0x400;
xls_usb_ohci_device_0.resource[0].start = memres;
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
