Hi Sarah, I'm wondering what to try next on the issue with my card reader running over this controller? Should I try a fresher kernel or anything? Regards, Matthew. On Wed, Aug 08, 2012 at 02:37:36PM -0700, Matthew Hall wrote: > I understand if it takes a while as it's a complex one off problem. I just > wanted to be sure we were on the same page and that I was being clear about > what worked and what didn't. > > Regards, > Matthew. > > On Wed, Aug 08, 2012 at 02:03:14PM -0700, Sarah Sharp wrote: > > Hi Matthew, > > > > This patch does fix the error that Gary reported. And even though it > > doesn't completely fix your issue, it did make the same error messages > > Gary was seeing go away. > > > > I'll still be looking at your logs, but I'm leaving on vacation this > > Friday, so I'm not sure if we'll have time to solve your issue before I > > leave. I'll be back Sept 4th. > > > > Sarah Sharp > > > > On Wed, Aug 08, 2012 at 12:44:39PM -0700, Matthew Hall wrote: > > > Hi Sarah, > > > > > > If I am reading right, this patch is not any different from the one we were > > > trying to get my card reader to work on USB 3.0. > > > > > > I did some further testing last with the same card, reader, and exfat driver > > > on a USB 2.0 port on the same machine and everything worked with no errors in > > > dmesg, when I cped 17GB of MTS film data off the card. > > > > > > This makes me think there must be some additional problem with the controller > > > which needs to get worked around or resolved before this controller is really > > > going to work. > > > > > > Regards, > > > Matthew. > -- > To unsubscribe from this list: send the line "unsubscribe linux-usb" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
