Huang Ying <ying.huang@xxxxxxxxx> writes:
> Do you have time to try the following patch?
>
> Best Regards,
> Huang Ying
>
> ---
> drivers/pci/pci-driver.c | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> --- a/drivers/pci/pci-driver.c
> +++ b/drivers/pci/pci-driver.c
> @@ -280,8 +280,12 @@ static long local_pci_probe(void *_ddi)
> {
> struct drv_dev_and_id *ddi = _ddi;
> struct device *dev = &ddi->dev->dev;
> + struct device *parent = dev->parent;
> int rc;
>
> + /* The parent bridge must be in active state when probing */
> + if (parent)
> + pm_runtime_get_sync(parent);
> /* Unbound PCI devices are always set to disabled and suspended.
> * During probe, the device is set to enabled and active and the
> * usage count is incremented. If the driver supports runtime PM,
> @@ -298,6 +302,8 @@ static long local_pci_probe(void *_ddi)
> pm_runtime_set_suspended(dev);
> pm_runtime_put_noidle(dev);
> }
> + if (parent)
> + pm_runtime_put(parent);
> return rc;
> }
>
Yup, that worked in the quick test I just did.
lspci reading the device config will still not wake the bridge, but I
assume that is intentional? But loading the device driver now wakes
both the bridge and the device, so that works.
Bjørn
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
