On Fri, Jun 08, 2012 at 02:36:36PM -0700, walt wrote: > 03:00.0 USB controller: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller > Subsystem: Device 174c:2104 > Kernel driver in use: xhci_hcd > > This is an add-on usb3 adapter, which I connect to an external usb3/SATA > docking station. The whole setup works extremely well except for one > annoying thing: > > When I power-up the docking station with the computer already running, > neither the docking station nor the hard disk show up until I do one > of two things: either reboot, or rmmod/modprobe the xhci module (which > loads automatically during boot). > > What's your opinion -- should the xhci driver be able to work around this > problem without help? Dunno. That sounds like a PCI hotplug issue, do you have the proper pci hotplug driver loaded for this docking station and does it properly detect when it is plugged in? greg k-h -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
