[PATCH v7 18/19] usb: gadget: remove langwell_udc

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



We have the chipidea driver now that supports both langwell and penwell,
so there is no need for this one any more.

Signed-off-by: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
---
 drivers/usb/gadget/Kconfig        |   16 -
 drivers/usb/gadget/Makefile       |    1 -
 drivers/usb/gadget/langwell_udc.c | 3419 -------------------------------------
 drivers/usb/gadget/langwell_udc.h |  223 ---
 include/linux/usb/langwell_udc.h  |  310 ----
 5 files changed, 3969 deletions(-)
 delete mode 100644 drivers/usb/gadget/langwell_udc.c
 delete mode 100644 drivers/usb/gadget/langwell_udc.h
 delete mode 100644 include/linux/usb/langwell_udc.h

diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 1d7405c..11c2b21 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -431,22 +431,6 @@ config USB_GOKU
 	   dynamically linked module called "goku_udc" and to force all
 	   gadget drivers to also be dynamically linked.
 
-config USB_LANGWELL
-	tristate "Intel Langwell USB Device Controller"
-	depends on PCI
-	depends on !PHYS_ADDR_T_64BIT
-	select USB_GADGET_DUALSPEED
-	help
-	   Intel Langwell USB Device Controller is a High-Speed USB
-	   On-The-Go device controller.
-
-	   The number of programmable endpoints is different through
-	   controller revision.
-
-	   Say "y" to link the driver statically, or "m" to build a
-	   dynamically linked module called "langwell_udc" and force all
-	   gadget drivers to also be dynamically linked.
-
 config USB_EG20T
 	tristate "Intel EG20T PCH/LAPIS Semiconductor IOH(ML7213/ML7831) UDC"
 	depends on PCI
diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
index 6ddfd26..51019aa 100644
--- a/drivers/usb/gadget/Makefile
+++ b/drivers/usb/gadget/Makefile
@@ -24,7 +24,6 @@ obj-$(CONFIG_USB_R8A66597)	+= r8a66597-udc.o
 obj-$(CONFIG_USB_FSL_QE)	+= fsl_qe_udc.o
 obj-$(CONFIG_USB_S3C_HSOTG)	+= s3c-hsotg.o
 obj-$(CONFIG_USB_S3C_HSUDC)	+= s3c-hsudc.o
-obj-$(CONFIG_USB_LANGWELL)	+= langwell_udc.o
 obj-$(CONFIG_USB_LPC32XX)	+= lpc32xx_udc.o
 obj-$(CONFIG_USB_EG20T)		+= pch_udc.o
 obj-$(CONFIG_USB_MV_UDC)	+= mv_udc.o
diff --git a/drivers/usb/gadget/langwell_udc.c b/drivers/usb/gadget/langwell_udc.c
deleted file mode 100644
index e119519..0000000
--- a/drivers/usb/gadget/langwell_udc.c
+++ /dev/null
@@ -1,3419 +0,0 @@
-/*
- * Intel Langwell USB Device Controller driver
- * Copyright (C) 2008-2009, Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- */
-
-
-/* #undef	DEBUG */
-/* #undef	VERBOSE_DEBUG */
-
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <linux/dma-mapping.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/ioport.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/timer.h>
-#include <linux/list.h>
-#include <linux/interrupt.h>
-#include <linux/moduleparam.h>
-#include <linux/device.h>
-#include <linux/usb/ch9.h>
-#include <linux/usb/gadget.h>
-#include <linux/usb/otg.h>
-#include <linux/pm.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <asm/unaligned.h>
-
-#include "langwell_udc.h"
-
-
-#define	DRIVER_DESC		"Intel Langwell USB Device Controller driver"
-#define	DRIVER_VERSION		"16 May 2009"
-
-static const char driver_name[] = "langwell_udc";
-static const char driver_desc[] = DRIVER_DESC;
-
-
-/* for endpoint 0 operations */
-static const struct usb_endpoint_descriptor
-langwell_ep0_desc = {
-	.bLength =		USB_DT_ENDPOINT_SIZE,
-	.bDescriptorType =	USB_DT_ENDPOINT,
-	.bEndpointAddress =	0,
-	.bmAttributes =		USB_ENDPOINT_XFER_CONTROL,
-	.wMaxPacketSize =	EP0_MAX_PKT_SIZE,
-};
-
-
-/*-------------------------------------------------------------------------*/
-/* debugging */
-
-#ifdef	VERBOSE_DEBUG
-static inline void print_all_registers(struct langwell_udc *dev)
-{
-	int	i;
-
-	/* Capability Registers */
-	dev_dbg(&dev->pdev->dev,
-		"Capability Registers (offset: 0x%04x, length: 0x%08x)\n",
-		CAP_REG_OFFSET, (u32)sizeof(struct langwell_cap_regs));
-	dev_dbg(&dev->pdev->dev, "caplength=0x%02x\n",
-			readb(&dev->cap_regs->caplength));
-	dev_dbg(&dev->pdev->dev, "hciversion=0x%04x\n",
-			readw(&dev->cap_regs->hciversion));
-	dev_dbg(&dev->pdev->dev, "hcsparams=0x%08x\n",
-			readl(&dev->cap_regs->hcsparams));
-	dev_dbg(&dev->pdev->dev, "hccparams=0x%08x\n",
-			readl(&dev->cap_regs->hccparams));
-	dev_dbg(&dev->pdev->dev, "dciversion=0x%04x\n",
-			readw(&dev->cap_regs->dciversion));
-	dev_dbg(&dev->pdev->dev, "dccparams=0x%08x\n",
-			readl(&dev->cap_regs->dccparams));
-
-	/* Operational Registers */
-	dev_dbg(&dev->pdev->dev,
-		"Operational Registers (offset: 0x%04x, length: 0x%08x)\n",
-		OP_REG_OFFSET, (u32)sizeof(struct langwell_op_regs));
-	dev_dbg(&dev->pdev->dev, "extsts=0x%08x\n",
-			readl(&dev->op_regs->extsts));
-	dev_dbg(&dev->pdev->dev, "extintr=0x%08x\n",
-			readl(&dev->op_regs->extintr));
-	dev_dbg(&dev->pdev->dev, "usbcmd=0x%08x\n",
-			readl(&dev->op_regs->usbcmd));
-	dev_dbg(&dev->pdev->dev, "usbsts=0x%08x\n",
-			readl(&dev->op_regs->usbsts));
-	dev_dbg(&dev->pdev->dev, "usbintr=0x%08x\n",
-			readl(&dev->op_regs->usbintr));
-	dev_dbg(&dev->pdev->dev, "frindex=0x%08x\n",
-			readl(&dev->op_regs->frindex));
-	dev_dbg(&dev->pdev->dev, "ctrldssegment=0x%08x\n",
-			readl(&dev->op_regs->ctrldssegment));
-	dev_dbg(&dev->pdev->dev, "deviceaddr=0x%08x\n",
-			readl(&dev->op_regs->deviceaddr));
-	dev_dbg(&dev->pdev->dev, "endpointlistaddr=0x%08x\n",
-			readl(&dev->op_regs->endpointlistaddr));
-	dev_dbg(&dev->pdev->dev, "ttctrl=0x%08x\n",
-			readl(&dev->op_regs->ttctrl));
-	dev_dbg(&dev->pdev->dev, "burstsize=0x%08x\n",
-			readl(&dev->op_regs->burstsize));
-	dev_dbg(&dev->pdev->dev, "txfilltuning=0x%08x\n",
-			readl(&dev->op_regs->txfilltuning));
-	dev_dbg(&dev->pdev->dev, "txttfilltuning=0x%08x\n",
-			readl(&dev->op_regs->txttfilltuning));
-	dev_dbg(&dev->pdev->dev, "ic_usb=0x%08x\n",
-			readl(&dev->op_regs->ic_usb));
-	dev_dbg(&dev->pdev->dev, "ulpi_viewport=0x%08x\n",
-			readl(&dev->op_regs->ulpi_viewport));
-	dev_dbg(&dev->pdev->dev, "configflag=0x%08x\n",
-			readl(&dev->op_regs->configflag));
-	dev_dbg(&dev->pdev->dev, "portsc1=0x%08x\n",
-			readl(&dev->op_regs->portsc1));
-	dev_dbg(&dev->pdev->dev, "devlc=0x%08x\n",
-			readl(&dev->op_regs->devlc));
-	dev_dbg(&dev->pdev->dev, "otgsc=0x%08x\n",
-			readl(&dev->op_regs->otgsc));
-	dev_dbg(&dev->pdev->dev, "usbmode=0x%08x\n",
-			readl(&dev->op_regs->usbmode));
-	dev_dbg(&dev->pdev->dev, "endptnak=0x%08x\n",
-			readl(&dev->op_regs->endptnak));
-	dev_dbg(&dev->pdev->dev, "endptnaken=0x%08x\n",
-			readl(&dev->op_regs->endptnaken));
-	dev_dbg(&dev->pdev->dev, "endptsetupstat=0x%08x\n",
-			readl(&dev->op_regs->endptsetupstat));
-	dev_dbg(&dev->pdev->dev, "endptprime=0x%08x\n",
-			readl(&dev->op_regs->endptprime));
-	dev_dbg(&dev->pdev->dev, "endptflush=0x%08x\n",
-			readl(&dev->op_regs->endptflush));
-	dev_dbg(&dev->pdev->dev, "endptstat=0x%08x\n",
-			readl(&dev->op_regs->endptstat));
-	dev_dbg(&dev->pdev->dev, "endptcomplete=0x%08x\n",
-			readl(&dev->op_regs->endptcomplete));
-
-	for (i = 0; i < dev->ep_max / 2; i++) {
-		dev_dbg(&dev->pdev->dev, "endptctrl[%d]=0x%08x\n",
-				i, readl(&dev->op_regs->endptctrl[i]));
-	}
-}
-#else
-
-#define	print_all_registers(dev)	do { } while (0)
-
-#endif /* VERBOSE_DEBUG */
-
-
-/*-------------------------------------------------------------------------*/
-
-#define	is_in(ep)	(((ep)->ep_num == 0) ? ((ep)->dev->ep0_dir ==	\
-			USB_DIR_IN) : (usb_endpoint_dir_in((ep)->ep.desc)))
-
-#define	DIR_STRING(ep)	(is_in(ep) ? "in" : "out")
-
-
-static char *type_string(const struct usb_endpoint_descriptor *desc)
-{
-	switch (usb_endpoint_type(desc)) {
-	case USB_ENDPOINT_XFER_BULK:
-		return "bulk";
-	case USB_ENDPOINT_XFER_ISOC:
-		return "iso";
-	case USB_ENDPOINT_XFER_INT:
-		return "int";
-	};
-
-	return "control";
-}
-
-
-/* configure endpoint control registers */
-static void ep_reset(struct langwell_ep *ep, unsigned char ep_num,
-		unsigned char is_in, unsigned char ep_type)
-{
-	struct langwell_udc	*dev;
-	u32			endptctrl;
-
-	dev = ep->dev;
-	dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	endptctrl = readl(&dev->op_regs->endptctrl[ep_num]);
-	if (is_in) {	/* TX */
-		if (ep_num)
-			endptctrl |= EPCTRL_TXR;
-		endptctrl |= EPCTRL_TXE;
-		endptctrl |= ep_type << EPCTRL_TXT_SHIFT;
-	} else {	/* RX */
-		if (ep_num)
-			endptctrl |= EPCTRL_RXR;
-		endptctrl |= EPCTRL_RXE;
-		endptctrl |= ep_type << EPCTRL_RXT_SHIFT;
-	}
-
-	writel(endptctrl, &dev->op_regs->endptctrl[ep_num]);
-
-	dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-}
-
-
-/* reset ep0 dQH and endptctrl */
-static void ep0_reset(struct langwell_udc *dev)
-{
-	struct langwell_ep	*ep;
-	int			i;
-
-	dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	/* ep0 in and out */
-	for (i = 0; i < 2; i++) {
-		ep = &dev->ep[i];
-		ep->dev = dev;
-
-		/* ep0 dQH */
-		ep->dqh = &dev->ep_dqh[i];
-
-		/* configure ep0 endpoint capabilities in dQH */
-		ep->dqh->dqh_ios = 1;
-		ep->dqh->dqh_mpl = EP0_MAX_PKT_SIZE;
-
-		/* enable ep0-in HW zero length termination select */
-		if (is_in(ep))
-			ep->dqh->dqh_zlt = 0;
-		ep->dqh->dqh_mult = 0;
-
-		ep->dqh->dtd_next = DTD_TERM;
-
-		/* configure ep0 control registers */
-		ep_reset(&dev->ep[0], 0, i, USB_ENDPOINT_XFER_CONTROL);
-	}
-
-	dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-/* endpoints operations */
-
-/* configure endpoint, making it usable */
-static int langwell_ep_enable(struct usb_ep *_ep,
-		const struct usb_endpoint_descriptor *desc)
-{
-	struct langwell_udc	*dev;
-	struct langwell_ep	*ep;
-	u16			max = 0;
-	unsigned long		flags;
-	int			i, retval = 0;
-	unsigned char		zlt, ios = 0, mult = 0;
-
-	ep = container_of(_ep, struct langwell_ep, ep);
-	dev = ep->dev;
-	dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	if (!_ep || !desc || ep->ep.desc
-			|| desc->bDescriptorType != USB_DT_ENDPOINT)
-		return -EINVAL;
-
-	if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)
-		return -ESHUTDOWN;
-
-	max = usb_endpoint_maxp(desc);
-
-	/*
-	 * disable HW zero length termination select
-	 * driver handles zero length packet through req->req.zero
-	 */
-	zlt = 1;
-
-	/*
-	 * sanity check type, direction, address, and then
-	 * initialize the endpoint capabilities fields in dQH
-	 */
-	switch (usb_endpoint_type(desc)) {
-	case USB_ENDPOINT_XFER_CONTROL:
-		ios = 1;
-		break;
-	case USB_ENDPOINT_XFER_BULK:
-		if ((dev->gadget.speed == USB_SPEED_HIGH
-					&& max != 512)
-				|| (dev->gadget.speed == USB_SPEED_FULL
-					&& max > 64)) {
-			goto done;
-		}
-		break;
-	case USB_ENDPOINT_XFER_INT:
-		if (strstr(ep->ep.name, "-iso")) /* bulk is ok */
-			goto done;
-
-		switch (dev->gadget.speed) {
-		case USB_SPEED_HIGH:
-			if (max <= 1024)
-				break;
-		case USB_SPEED_FULL:
-			if (max <= 64)
-				break;
-		default:
-			if (max <= 8)
-				break;
-			goto done;
-		}
-		break;
-	case USB_ENDPOINT_XFER_ISOC:
-		if (strstr(ep->ep.name, "-bulk")
-				|| strstr(ep->ep.name, "-int"))
-			goto done;
-
-		switch (dev->gadget.speed) {
-		case USB_SPEED_HIGH:
-			if (max <= 1024)
-				break;
-		case USB_SPEED_FULL:
-			if (max <= 1023)
-				break;
-		default:
-			goto done;
-		}
-		/*
-		 * FIXME:
-		 * calculate transactions needed for high bandwidth iso
-		 */
-		mult = (unsigned char)(1 + ((max >> 11) & 0x03));
-		max = max & 0x8ff;	/* bit 0~10 */
-		/* 3 transactions at most */
-		if (mult > 3)
-			goto done;
-		break;
-	default:
-		goto done;
-	}
-
-	spin_lock_irqsave(&dev->lock, flags);
-
-	ep->ep.maxpacket = max;
-	ep->ep.desc = desc;
-	ep->stopped = 0;
-	ep->ep_num = usb_endpoint_num(desc);
-
-	/* ep_type */
-	ep->ep_type = usb_endpoint_type(desc);
-
-	/* configure endpoint control registers */
-	ep_reset(ep, ep->ep_num, is_in(ep), ep->ep_type);
-
-	/* configure endpoint capabilities in dQH */
-	i = ep->ep_num * 2 + is_in(ep);
-	ep->dqh = &dev->ep_dqh[i];
-	ep->dqh->dqh_ios = ios;
-	ep->dqh->dqh_mpl = cpu_to_le16(max);
-	ep->dqh->dqh_zlt = zlt;
-	ep->dqh->dqh_mult = mult;
-	ep->dqh->dtd_next = DTD_TERM;
-
-	dev_dbg(&dev->pdev->dev, "enabled %s (ep%d%s-%s), max %04x\n",
-			_ep->name,
-			ep->ep_num,
-			DIR_STRING(ep),
-			type_string(desc),
-			max);
-
-	spin_unlock_irqrestore(&dev->lock, flags);
-done:
-	dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-	return retval;
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-/* retire a request */
-static void done(struct langwell_ep *ep, struct langwell_request *req,
-		int status)
-{
-	struct langwell_udc	*dev = ep->dev;
-	unsigned		stopped = ep->stopped;
-	struct langwell_dtd	*curr_dtd, *next_dtd;
-	int			i;
-
-	dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	/* remove the req from ep->queue */
-	list_del_init(&req->queue);
-
-	if (req->req.status == -EINPROGRESS)
-		req->req.status = status;
-	else
-		status = req->req.status;
-
-	/* free dTD for the request */
-	next_dtd = req->head;
-	for (i = 0; i < req->dtd_count; i++) {
-		curr_dtd = next_dtd;
-		if (i != req->dtd_count - 1)
-			next_dtd = curr_dtd->next_dtd_virt;
-		dma_pool_free(dev->dtd_pool, curr_dtd, curr_dtd->dtd_dma);
-	}
-
-	usb_gadget_unmap_request(&dev->gadget, &req->req, is_in(ep));
-
-	if (status != -ESHUTDOWN)
-		dev_dbg(&dev->pdev->dev,
-				"complete %s, req %p, stat %d, len %u/%u\n",
-				ep->ep.name, &req->req, status,
-				req->req.actual, req->req.length);
-
-	/* don't modify queue heads during completion callback */
-	ep->stopped = 1;
-
-	spin_unlock(&dev->lock);
-	/* complete routine from gadget driver */
-	if (req->req.complete)
-		req->req.complete(&ep->ep, &req->req);
-
-	spin_lock(&dev->lock);
-	ep->stopped = stopped;
-
-	dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-}
-
-
-static void langwell_ep_fifo_flush(struct usb_ep *_ep);
-
-/* delete all endpoint requests, called with spinlock held */
-static void nuke(struct langwell_ep *ep, int status)
-{
-	/* called with spinlock held */
-	ep->stopped = 1;
-
-	/* endpoint fifo flush */
-	if (&ep->ep && ep->ep.desc)
-		langwell_ep_fifo_flush(&ep->ep);
-
-	while (!list_empty(&ep->queue)) {
-		struct langwell_request	*req = NULL;
-		req = list_entry(ep->queue.next, struct langwell_request,
-				queue);
-		done(ep, req, status);
-	}
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-/* endpoint is no longer usable */
-static int langwell_ep_disable(struct usb_ep *_ep)
-{
-	struct langwell_ep	*ep;
-	unsigned long		flags;
-	struct langwell_udc	*dev;
-	int			ep_num;
-	u32			endptctrl;
-
-	ep = container_of(_ep, struct langwell_ep, ep);
-	dev = ep->dev;
-	dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	if (!_ep || !ep->ep.desc)
-		return -EINVAL;
-
-	spin_lock_irqsave(&dev->lock, flags);
-
-	/* disable endpoint control register */
-	ep_num = ep->ep_num;
-	endptctrl = readl(&dev->op_regs->endptctrl[ep_num]);
-	if (is_in(ep))
-		endptctrl &= ~EPCTRL_TXE;
-	else
-		endptctrl &= ~EPCTRL_RXE;
-	writel(endptctrl, &dev->op_regs->endptctrl[ep_num]);
-
-	/* nuke all pending requests (does flush) */
-	nuke(ep, -ESHUTDOWN);
-
-	ep->ep.desc = NULL;
-	ep->stopped = 1;
-
-	spin_unlock_irqrestore(&dev->lock, flags);
-
-	dev_dbg(&dev->pdev->dev, "disabled %s\n", _ep->name);
-	dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-
-	return 0;
-}
-
-
-/* allocate a request object to use with this endpoint */
-static struct usb_request *langwell_alloc_request(struct usb_ep *_ep,
-		gfp_t gfp_flags)
-{
-	struct langwell_ep	*ep;
-	struct langwell_udc	*dev;
-	struct langwell_request	*req = NULL;
-
-	if (!_ep)
-		return NULL;
-
-	ep = container_of(_ep, struct langwell_ep, ep);
-	dev = ep->dev;
-	dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	req = kzalloc(sizeof(*req), gfp_flags);
-	if (!req)
-		return NULL;
-
-	req->req.dma = DMA_ADDR_INVALID;
-	INIT_LIST_HEAD(&req->queue);
-
-	dev_vdbg(&dev->pdev->dev, "alloc request for %s\n", _ep->name);
-	dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-	return &req->req;
-}
-
-
-/* free a request object */
-static void langwell_free_request(struct usb_ep *_ep,
-		struct usb_request *_req)
-{
-	struct langwell_ep	*ep;
-	struct langwell_udc	*dev;
-	struct langwell_request	*req = NULL;
-
-	ep = container_of(_ep, struct langwell_ep, ep);
-	dev = ep->dev;
-	dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	if (!_ep || !_req)
-		return;
-
-	req = container_of(_req, struct langwell_request, req);
-	WARN_ON(!list_empty(&req->queue));
-
-	if (_req)
-		kfree(req);
-
-	dev_vdbg(&dev->pdev->dev, "free request for %s\n", _ep->name);
-	dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-/* queue dTD and PRIME endpoint */
-static int queue_dtd(struct langwell_ep *ep, struct langwell_request *req)
-{
-	u32			bit_mask, usbcmd, endptstat, dtd_dma;
-	u8			dtd_status;
-	int			i;
-	struct langwell_dqh	*dqh;
-	struct langwell_udc	*dev;
-
-	dev = ep->dev;
-	dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	i = ep->ep_num * 2 + is_in(ep);
-	dqh = &dev->ep_dqh[i];
-
-	if (ep->ep_num)
-		dev_vdbg(&dev->pdev->dev, "%s\n", ep->name);
-	else
-		/* ep0 */
-		dev_vdbg(&dev->pdev->dev, "%s-%s\n", ep->name, DIR_STRING(ep));
-
-	dev_vdbg(&dev->pdev->dev, "ep_dqh[%d] addr: 0x%p\n",
-			i, &(dev->ep_dqh[i]));
-
-	bit_mask = is_in(ep) ?
-		(1 << (ep->ep_num + 16)) : (1 << (ep->ep_num));
-
-	dev_vdbg(&dev->pdev->dev, "bit_mask = 0x%08x\n", bit_mask);
-
-	/* check if the pipe is empty */
-	if (!(list_empty(&ep->queue))) {
-		/* add dTD to the end of linked list */
-		struct langwell_request	*lastreq;
-		lastreq = list_entry(ep->queue.prev,
-				struct langwell_request, queue);
-
-		lastreq->tail->dtd_next =
-			cpu_to_le32(req->head->dtd_dma & DTD_NEXT_MASK);
-
-		/* read prime bit, if 1 goto out */
-		if (readl(&dev->op_regs->endptprime) & bit_mask)
-			goto out;
-
-		do {
-			/* set ATDTW bit in USBCMD */
-			usbcmd = readl(&dev->op_regs->usbcmd);
-			writel(usbcmd | CMD_ATDTW, &dev->op_regs->usbcmd);
-
-			/* read correct status bit */
-			endptstat = readl(&dev->op_regs->endptstat) & bit_mask;
-
-		} while (!(readl(&dev->op_regs->usbcmd) & CMD_ATDTW));
-
-		/* write ATDTW bit to 0 */
-		usbcmd = readl(&dev->op_regs->usbcmd);
-		writel(usbcmd & ~CMD_ATDTW, &dev->op_regs->usbcmd);
-
-		if (endptstat)
-			goto out;
-	}
-
-	/* write dQH next pointer and terminate bit to 0 */
-	dtd_dma = req->head->dtd_dma & DTD_NEXT_MASK;
-	dqh->dtd_next = cpu_to_le32(dtd_dma);
-
-	/* clear active and halt bit */
-	dtd_status = (u8) ~(DTD_STS_ACTIVE | DTD_STS_HALTED);
-	dqh->dtd_status &= dtd_status;
-	dev_vdbg(&dev->pdev->dev, "dqh->dtd_status = 0x%x\n", dqh->dtd_status);
-
-	/* ensure that updates to the dQH will occur before priming */
-	wmb();
-
-	/* write 1 to endptprime register to PRIME endpoint */
-	bit_mask = is_in(ep) ? (1 << (ep->ep_num + 16)) : (1 << ep->ep_num);
-	dev_vdbg(&dev->pdev->dev, "endprime bit_mask = 0x%08x\n", bit_mask);
-	writel(bit_mask, &dev->op_regs->endptprime);
-out:
-	dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-	return 0;
-}
-
-
-/* fill in the dTD structure to build a transfer descriptor */
-static struct langwell_dtd *build_dtd(struct langwell_request *req,
-		unsigned *length, dma_addr_t *dma, int *is_last)
-{
-	u32			 buf_ptr;
-	struct langwell_dtd	*dtd;
-	struct langwell_udc	*dev;
-	int			i;
-
-	dev = req->ep->dev;
-	dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	/* the maximum transfer length, up to 16k bytes */
-	*length = min(req->req.length - req->req.actual,
-			(unsigned)DTD_MAX_TRANSFER_LENGTH);
-
-	/* create dTD dma_pool resource */
-	dtd = dma_pool_alloc(dev->dtd_pool, GFP_KERNEL, dma);
-	if (dtd == NULL)
-		return dtd;
-	dtd->dtd_dma = *dma;
-
-	/* initialize buffer page pointers */
-	buf_ptr = (u32)(req->req.dma + req->req.actual);
-	for (i = 0; i < 5; i++)
-		dtd->dtd_buf[i] = cpu_to_le32(buf_ptr + i * PAGE_SIZE);
-
-	req->req.actual += *length;
-
-	/* fill in total bytes with transfer size */
-	dtd->dtd_total = cpu_to_le16(*length);
-	dev_vdbg(&dev->pdev->dev, "dtd->dtd_total = %d\n", dtd->dtd_total);
-
-	/* set is_last flag if req->req.zero is set or not */
-	if (req->req.zero) {
-		if (*length == 0 || (*length % req->ep->ep.maxpacket) != 0)
-			*is_last = 1;
-		else
-			*is_last = 0;
-	} else if (req->req.length == req->req.actual) {
-		*is_last = 1;
-	} else
-		*is_last = 0;
-
-	if (*is_last == 0)
-		dev_vdbg(&dev->pdev->dev, "multi-dtd request!\n");
-
-	/* set interrupt on complete bit for the last dTD */
-	if (*is_last && !req->req.no_interrupt)
-		dtd->dtd_ioc = 1;
-
-	/* set multiplier override 0 for non-ISO and non-TX endpoint */
-	dtd->dtd_multo = 0;
-
-	/* set the active bit of status field to 1 */
-	dtd->dtd_status = DTD_STS_ACTIVE;
-	dev_vdbg(&dev->pdev->dev, "dtd->dtd_status = 0x%02x\n",
-			dtd->dtd_status);
-
-	dev_vdbg(&dev->pdev->dev, "length = %d, dma addr= 0x%08x\n",
-			*length, (int)*dma);
-	dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-	return dtd;
-}
-
-
-/* generate dTD linked list for a request */
-static int req_to_dtd(struct langwell_request *req)
-{
-	unsigned		count;
-	int			is_last, is_first = 1;
-	struct langwell_dtd	*dtd, *last_dtd = NULL;
-	struct langwell_udc	*dev;
-	dma_addr_t		dma;
-
-	dev = req->ep->dev;
-	dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-	do {
-		dtd = build_dtd(req, &count, &dma, &is_last);
-		if (dtd == NULL)
-			return -ENOMEM;
-
-		if (is_first) {
-			is_first = 0;
-			req->head = dtd;
-		} else {
-			last_dtd->dtd_next = cpu_to_le32(dma);
-			last_dtd->next_dtd_virt = dtd;
-		}
-		last_dtd = dtd;
-		req->dtd_count++;
-	} while (!is_last);
-
-	/* set terminate bit to 1 for the last dTD */
-	dtd->dtd_next = DTD_TERM;
-
-	req->tail = dtd;
-
-	dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-	return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* queue (submits) an I/O requests to an endpoint */
-static int langwell_ep_queue(struct usb_ep *_ep, struct usb_request *_req,
-		gfp_t gfp_flags)
-{
-	struct langwell_request	*req;
-	struct langwell_ep	*ep;
-	struct langwell_udc	*dev;
-	unsigned long		flags;
-	int			is_iso = 0;
-	int			ret;
-
-	/* always require a cpu-view buffer */
-	req = container_of(_req, struct langwell_request, req);
-	ep = container_of(_ep, struct langwell_ep, ep);
-
-	if (!_req || !_req->complete || !_req->buf
-			|| !list_empty(&req->queue)) {
-		return -EINVAL;
-	}
-
-	if (unlikely(!_ep || !ep->ep.desc))
-		return -EINVAL;
-
-	dev = ep->dev;
-	req->ep = ep;
-	dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	if (usb_endpoint_xfer_isoc(ep->ep.desc)) {
-		if (req->req.length > ep->ep.maxpacket)
-			return -EMSGSIZE;
-		is_iso = 1;
-	}
-
-	if (unlikely(!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN))
-		return -ESHUTDOWN;
-
-	/* set up dma mapping */
-	ret = usb_gadget_map_request(&dev->gadget, &req->req, is_in(ep));
-	if (ret)
-		return ret;
-
-	dev_dbg(&dev->pdev->dev,
-			"%s queue req %p, len %u, buf %p, dma 0x%08x\n",
-			_ep->name,
-			_req, _req->length, _req->buf, (int)_req->dma);
-
-	_req->status = -EINPROGRESS;
-	_req->actual = 0;
-	req->dtd_count = 0;
-
-	spin_lock_irqsave(&dev->lock, flags);
-
-	/* build and put dTDs to endpoint queue */
-	if (!req_to_dtd(req)) {
-		queue_dtd(ep, req);
-	} else {
-		spin_unlock_irqrestore(&dev->lock, flags);
-		return -ENOMEM;
-	}
-
-	/* update ep0 state */
-	if (ep->ep_num == 0)
-		dev->ep0_state = DATA_STATE_XMIT;
-
-	if (likely(req != NULL)) {
-		list_add_tail(&req->queue, &ep->queue);
-		dev_vdbg(&dev->pdev->dev, "list_add_tail()\n");
-	}
-
-	spin_unlock_irqrestore(&dev->lock, flags);
-
-	dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-	return 0;
-}
-
-
-/* dequeue (cancels, unlinks) an I/O request from an endpoint */
-static int langwell_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
-{
-	struct langwell_ep	*ep;
-	struct langwell_udc	*dev;
-	struct langwell_request	*req;
-	unsigned long		flags;
-	int			stopped, ep_num, retval = 0;
-	u32			endptctrl;
-
-	ep = container_of(_ep, struct langwell_ep, ep);
-	dev = ep->dev;
-	dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	if (!_ep || !ep->ep.desc || !_req)
-		return -EINVAL;
-
-	if (!dev->driver)
-		return -ESHUTDOWN;
-
-	spin_lock_irqsave(&dev->lock, flags);
-	stopped = ep->stopped;
-
-	/* quiesce dma while we patch the queue */
-	ep->stopped = 1;
-	ep_num = ep->ep_num;
-
-	/* disable endpoint control register */
-	endptctrl = readl(&dev->op_regs->endptctrl[ep_num]);
-	if (is_in(ep))
-		endptctrl &= ~EPCTRL_TXE;
-	else
-		endptctrl &= ~EPCTRL_RXE;
-	writel(endptctrl, &dev->op_regs->endptctrl[ep_num]);
-
-	/* make sure it's still queued on this endpoint */
-	list_for_each_entry(req, &ep->queue, queue) {
-		if (&req->req == _req)
-			break;
-	}
-
-	if (&req->req != _req) {
-		retval = -EINVAL;
-		goto done;
-	}
-
-	/* queue head may be partially complete. */
-	if (ep->queue.next == &req->queue) {
-		dev_dbg(&dev->pdev->dev, "unlink (%s) dma\n", _ep->name);
-		_req->status = -ECONNRESET;
-		langwell_ep_fifo_flush(&ep->ep);
-
-		/* not the last request in endpoint queue */
-		if (likely(ep->queue.next == &req->queue)) {
-			struct langwell_dqh	*dqh;
-			struct langwell_request	*next_req;
-
-			dqh = ep->dqh;
-			next_req = list_entry(req->queue.next,
-					struct langwell_request, queue);
-
-			/* point the dQH to the first dTD of next request */
-			writel((u32) next_req->head, &dqh->dqh_current);
-		}
-	} else {
-		struct langwell_request	*prev_req;
-
-		prev_req = list_entry(req->queue.prev,
-				struct langwell_request, queue);
-		writel(readl(&req->tail->dtd_next),
-				&prev_req->tail->dtd_next);
-	}
-
-	done(ep, req, -ECONNRESET);
-
-done:
-	/* enable endpoint again */
-	endptctrl = readl(&dev->op_regs->endptctrl[ep_num]);
-	if (is_in(ep))
-		endptctrl |= EPCTRL_TXE;
-	else
-		endptctrl |= EPCTRL_RXE;
-	writel(endptctrl, &dev->op_regs->endptctrl[ep_num]);
-
-	ep->stopped = stopped;
-	spin_unlock_irqrestore(&dev->lock, flags);
-
-	dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-	return retval;
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-/* endpoint set/clear halt */
-static void ep_set_halt(struct langwell_ep *ep, int value)
-{
-	u32			endptctrl = 0;
-	int			ep_num;
-	struct langwell_udc	*dev = ep->dev;
-	dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	ep_num = ep->ep_num;
-	endptctrl = readl(&dev->op_regs->endptctrl[ep_num]);
-
-	/* value: 1 - set halt, 0 - clear halt */
-	if (value) {
-		/* set the stall bit */
-		if (is_in(ep))
-			endptctrl |= EPCTRL_TXS;
-		else
-			endptctrl |= EPCTRL_RXS;
-	} else {
-		/* clear the stall bit and reset data toggle */
-		if (is_in(ep)) {
-			endptctrl &= ~EPCTRL_TXS;
-			endptctrl |= EPCTRL_TXR;
-		} else {
-			endptctrl &= ~EPCTRL_RXS;
-			endptctrl |= EPCTRL_RXR;
-		}
-	}
-
-	writel(endptctrl, &dev->op_regs->endptctrl[ep_num]);
-
-	dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-}
-
-
-/* set the endpoint halt feature */
-static int langwell_ep_set_halt(struct usb_ep *_ep, int value)
-{
-	struct langwell_ep	*ep;
-	struct langwell_udc	*dev;
-	unsigned long		flags;
-	int			retval = 0;
-
-	ep = container_of(_ep, struct langwell_ep, ep);
-	dev = ep->dev;
-
-	dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	if (!_ep || !ep->ep.desc)
-		return -EINVAL;
-
-	if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)
-		return -ESHUTDOWN;
-
-	if (usb_endpoint_xfer_isoc(ep->ep.desc))
-		return  -EOPNOTSUPP;
-
-	spin_lock_irqsave(&dev->lock, flags);
-
-	/*
-	 * attempt to halt IN ep will fail if any transfer requests
-	 * are still queue
-	 */
-	if (!list_empty(&ep->queue) && is_in(ep) && value) {
-		/* IN endpoint FIFO holds bytes */
-		dev_dbg(&dev->pdev->dev, "%s FIFO holds bytes\n", _ep->name);
-		retval = -EAGAIN;
-		goto done;
-	}
-
-	/* endpoint set/clear halt */
-	if (ep->ep_num) {
-		ep_set_halt(ep, value);
-	} else { /* endpoint 0 */
-		dev->ep0_state = WAIT_FOR_SETUP;
-		dev->ep0_dir = USB_DIR_OUT;
-	}
-done:
-	spin_unlock_irqrestore(&dev->lock, flags);
-	dev_dbg(&dev->pdev->dev, "%s %s halt\n",
-			_ep->name, value ? "set" : "clear");
-	dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-	return retval;
-}
-
-
-/* set the halt feature and ignores clear requests */
-static int langwell_ep_set_wedge(struct usb_ep *_ep)
-{
-	struct langwell_ep	*ep;
-	struct langwell_udc	*dev;
-
-	ep = container_of(_ep, struct langwell_ep, ep);
-	dev = ep->dev;
-
-	dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	if (!_ep || !ep->ep.desc)
-		return -EINVAL;
-
-	dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-	return usb_ep_set_halt(_ep);
-}
-
-
-/* flush contents of a fifo */
-static void langwell_ep_fifo_flush(struct usb_ep *_ep)
-{
-	struct langwell_ep	*ep;
-	struct langwell_udc	*dev;
-	u32			flush_bit;
-	unsigned long		timeout;
-
-	ep = container_of(_ep, struct langwell_ep, ep);
-	dev = ep->dev;
-
-	dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	if (!_ep || !ep->ep.desc) {
-		dev_vdbg(&dev->pdev->dev, "ep or ep->ep.desc is NULL\n");
-		dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-		return;
-	}
-
-	dev_vdbg(&dev->pdev->dev, "%s-%s fifo flush\n",
-			_ep->name, DIR_STRING(ep));
-
-	/* flush endpoint buffer */
-	if (ep->ep_num == 0)
-		flush_bit = (1 << 16) | 1;
-	else if (is_in(ep))
-		flush_bit = 1 << (ep->ep_num + 16);	/* TX */
-	else
-		flush_bit = 1 << ep->ep_num;		/* RX */
-
-	/* wait until flush complete */
-	timeout = jiffies + FLUSH_TIMEOUT;
-	do {
-		writel(flush_bit, &dev->op_regs->endptflush);
-		while (readl(&dev->op_regs->endptflush)) {
-			if (time_after(jiffies, timeout)) {
-				dev_err(&dev->pdev->dev, "ep flush timeout\n");
-				goto done;
-			}
-			cpu_relax();
-		}
-	} while (readl(&dev->op_regs->endptstat) & flush_bit);
-done:
-	dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-}
-
-
-/* endpoints operations structure */
-static const struct usb_ep_ops langwell_ep_ops = {
-
-	/* configure endpoint, making it usable */
-	.enable		= langwell_ep_enable,
-
-	/* endpoint is no longer usable */
-	.disable	= langwell_ep_disable,
-
-	/* allocate a request object to use with this endpoint */
-	.alloc_request	= langwell_alloc_request,
-
-	/* free a request object */
-	.free_request	= langwell_free_request,
-
-	/* queue (submits) an I/O requests to an endpoint */
-	.queue		= langwell_ep_queue,
-
-	/* dequeue (cancels, unlinks) an I/O request from an endpoint */
-	.dequeue	= langwell_ep_dequeue,
-
-	/* set the endpoint halt feature */
-	.set_halt	= langwell_ep_set_halt,
-
-	/* set the halt feature and ignores clear requests */
-	.set_wedge	= langwell_ep_set_wedge,
-
-	/* flush contents of a fifo */
-	.fifo_flush	= langwell_ep_fifo_flush,
-};
-
-
-/*-------------------------------------------------------------------------*/
-
-/* device controller usb_gadget_ops structure */
-
-/* returns the current frame number */
-static int langwell_get_frame(struct usb_gadget *_gadget)
-{
-	struct langwell_udc	*dev;
-	u16			retval;
-
-	if (!_gadget)
-		return -ENODEV;
-
-	dev = container_of(_gadget, struct langwell_udc, gadget);
-	dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	retval = readl(&dev->op_regs->frindex) & FRINDEX_MASK;
-
-	dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-	return retval;
-}
-
-
-/* enter or exit PHY low power state */
-static void langwell_phy_low_power(struct langwell_udc *dev, bool flag)
-{
-	u32		devlc;
-	u8		devlc_byte2;
-	dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	devlc = readl(&dev->op_regs->devlc);
-	dev_vdbg(&dev->pdev->dev, "devlc = 0x%08x\n", devlc);
-
-	if (flag)
-		devlc |= LPM_PHCD;
-	else
-		devlc &= ~LPM_PHCD;
-
-	/* FIXME: workaround for Langwell A1/A2/A3 sighting */
-	devlc_byte2 = (devlc >> 16) & 0xff;
-	writeb(devlc_byte2, (u8 *)&dev->op_regs->devlc + 2);
-
-	devlc = readl(&dev->op_regs->devlc);
-	dev_vdbg(&dev->pdev->dev,
-			"%s PHY low power suspend, devlc = 0x%08x\n",
-			flag ? "enter" : "exit", devlc);
-}
-
-
-/* tries to wake up the host connected to this gadget */
-static int langwell_wakeup(struct usb_gadget *_gadget)
-{
-	struct langwell_udc	*dev;
-	u32			portsc1;
-	unsigned long		flags;
-
-	if (!_gadget)
-		return 0;
-
-	dev = container_of(_gadget, struct langwell_udc, gadget);
-	dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	/* remote wakeup feature not enabled by host */
-	if (!dev->remote_wakeup) {
-		dev_info(&dev->pdev->dev, "remote wakeup is disabled\n");
-		return -ENOTSUPP;
-	}
-
-	spin_lock_irqsave(&dev->lock, flags);
-
-	portsc1 = readl(&dev->op_regs->portsc1);
-	if (!(portsc1 & PORTS_SUSP)) {
-		spin_unlock_irqrestore(&dev->lock, flags);
-		return 0;
-	}
-
-	/* LPM L1 to L0 or legacy remote wakeup */
-	if (dev->lpm && dev->lpm_state == LPM_L1)
-		dev_info(&dev->pdev->dev, "LPM L1 to L0 remote wakeup\n");
-	else
-		dev_info(&dev->pdev->dev, "device remote wakeup\n");
-
-	/* exit PHY low power suspend */
-	if (dev->pdev->device != 0x0829)
-		langwell_phy_low_power(dev, 0);
-
-	/* force port resume */
-	portsc1 |= PORTS_FPR;
-	writel(portsc1, &dev->op_regs->portsc1);
-
-	spin_unlock_irqrestore(&dev->lock, flags);
-
-	dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-	return 0;
-}
-
-
-/* notify controller that VBUS is powered or not */
-static int langwell_vbus_session(struct usb_gadget *_gadget, int is_active)
-{
-	struct langwell_udc	*dev;
-	unsigned long		flags;
-	u32			usbcmd;
-
-	if (!_gadget)
-		return -ENODEV;
-
-	dev = container_of(_gadget, struct langwell_udc, gadget);
-	dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	spin_lock_irqsave(&dev->lock, flags);
-	dev_vdbg(&dev->pdev->dev, "VBUS status: %s\n",
-			is_active ? "on" : "off");
-
-	dev->vbus_active = (is_active != 0);
-	if (dev->driver && dev->softconnected && dev->vbus_active) {
-		usbcmd = readl(&dev->op_regs->usbcmd);
-		usbcmd |= CMD_RUNSTOP;
-		writel(usbcmd, &dev->op_regs->usbcmd);
-	} else {
-		usbcmd = readl(&dev->op_regs->usbcmd);
-		usbcmd &= ~CMD_RUNSTOP;
-		writel(usbcmd, &dev->op_regs->usbcmd);
-	}
-
-	spin_unlock_irqrestore(&dev->lock, flags);
-
-	dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-	return 0;
-}
-
-
-/* constrain controller's VBUS power usage */
-static int langwell_vbus_draw(struct usb_gadget *_gadget, unsigned mA)
-{
-	struct langwell_udc	*dev;
-
-	if (!_gadget)
-		return -ENODEV;
-
-	dev = container_of(_gadget, struct langwell_udc, gadget);
-	dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	if (dev->transceiver) {
-		dev_vdbg(&dev->pdev->dev, "usb_phy_set_power\n");
-		dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-		return usb_phy_set_power(dev->transceiver, mA);
-	}
-
-	dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-	return -ENOTSUPP;
-}
-
-
-/* D+ pullup, software-controlled connect/disconnect to USB host */
-static int langwell_pullup(struct usb_gadget *_gadget, int is_on)
-{
-	struct langwell_udc	*dev;
-	u32			usbcmd;
-	unsigned long		flags;
-
-	if (!_gadget)
-		return -ENODEV;
-
-	dev = container_of(_gadget, struct langwell_udc, gadget);
-
-	dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	spin_lock_irqsave(&dev->lock, flags);
-	dev->softconnected = (is_on != 0);
-
-	if (dev->driver && dev->softconnected && dev->vbus_active) {
-		usbcmd = readl(&dev->op_regs->usbcmd);
-		usbcmd |= CMD_RUNSTOP;
-		writel(usbcmd, &dev->op_regs->usbcmd);
-	} else {
-		usbcmd = readl(&dev->op_regs->usbcmd);
-		usbcmd &= ~CMD_RUNSTOP;
-		writel(usbcmd, &dev->op_regs->usbcmd);
-	}
-	spin_unlock_irqrestore(&dev->lock, flags);
-
-	dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-	return 0;
-}
-
-static int langwell_start(struct usb_gadget *g,
-		struct usb_gadget_driver *driver);
-
-static int langwell_stop(struct usb_gadget *g,
-		struct usb_gadget_driver *driver);
-
-/* device controller usb_gadget_ops structure */
-static const struct usb_gadget_ops langwell_ops = {
-
-	/* returns the current frame number */
-	.get_frame	= langwell_get_frame,
-
-	/* tries to wake up the host connected to this gadget */
-	.wakeup		= langwell_wakeup,
-
-	/* set the device selfpowered feature, always selfpowered */
-	/* .set_selfpowered = langwell_set_selfpowered, */
-
-	/* notify controller that VBUS is powered or not */
-	.vbus_session	= langwell_vbus_session,
-
-	/* constrain controller's VBUS power usage */
-	.vbus_draw	= langwell_vbus_draw,
-
-	/* D+ pullup, software-controlled connect/disconnect to USB host */
-	.pullup		= langwell_pullup,
-
-	.udc_start	= langwell_start,
-	.udc_stop	= langwell_stop,
-};
-
-
-/*-------------------------------------------------------------------------*/
-
-/* device controller operations */
-
-/* reset device controller */
-static int langwell_udc_reset(struct langwell_udc *dev)
-{
-	u32		usbcmd, usbmode, devlc, endpointlistaddr;
-	u8		devlc_byte0, devlc_byte2;
-	unsigned long	timeout;
-
-	if (!dev)
-		return -EINVAL;
-
-	dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	/* set controller to stop state */
-	usbcmd = readl(&dev->op_regs->usbcmd);
-	usbcmd &= ~CMD_RUNSTOP;
-	writel(usbcmd, &dev->op_regs->usbcmd);
-
-	/* reset device controller */
-	usbcmd = readl(&dev->op_regs->usbcmd);
-	usbcmd |= CMD_RST;
-	writel(usbcmd, &dev->op_regs->usbcmd);
-
-	/* wait for reset to complete */
-	timeout = jiffies + RESET_TIMEOUT;
-	while (readl(&dev->op_regs->usbcmd) & CMD_RST) {
-		if (time_after(jiffies, timeout)) {
-			dev_err(&dev->pdev->dev, "device reset timeout\n");
-			return -ETIMEDOUT;
-		}
-		cpu_relax();
-	}
-
-	/* set controller to device mode */
-	usbmode = readl(&dev->op_regs->usbmode);
-	usbmode |= MODE_DEVICE;
-
-	/* turn setup lockout off, require setup tripwire in usbcmd */
-	usbmode |= MODE_SLOM;
-
-	writel(usbmode, &dev->op_regs->usbmode);
-	usbmode = readl(&dev->op_regs->usbmode);
-	dev_vdbg(&dev->pdev->dev, "usbmode=0x%08x\n", usbmode);
-
-	/* Write-Clear setup status */
-	writel(0, &dev->op_regs->usbsts);
-
-	/* if support USB LPM, ACK all LPM token */
-	if (dev->lpm) {
-		devlc = readl(&dev->op_regs->devlc);
-		dev_vdbg(&dev->pdev->dev, "devlc = 0x%08x\n", devlc);
-		/* FIXME: workaround for Langwell A1/A2/A3 sighting */
-		devlc &= ~LPM_STL;	/* don't STALL LPM token */
-		devlc &= ~LPM_NYT_ACK;	/* ACK LPM token */
-		devlc_byte0 = devlc & 0xff;
-		devlc_byte2 = (devlc >> 16) & 0xff;
-		writeb(devlc_byte0, (u8 *)&dev->op_regs->devlc);
-		writeb(devlc_byte2, (u8 *)&dev->op_regs->devlc + 2);
-		devlc = readl(&dev->op_regs->devlc);
-		dev_vdbg(&dev->pdev->dev,
-				"ACK LPM token, devlc = 0x%08x\n", devlc);
-	}
-
-	/* fill endpointlistaddr register */
-	endpointlistaddr = dev->ep_dqh_dma;
-	endpointlistaddr &= ENDPOINTLISTADDR_MASK;
-	writel(endpointlistaddr, &dev->op_regs->endpointlistaddr);
-
-	dev_vdbg(&dev->pdev->dev,
-		"dQH base (vir: %p, phy: 0x%08x), endpointlistaddr=0x%08x\n",
-		dev->ep_dqh, endpointlistaddr,
-		readl(&dev->op_regs->endpointlistaddr));
-	dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-	return 0;
-}
-
-
-/* reinitialize device controller endpoints */
-static int eps_reinit(struct langwell_udc *dev)
-{
-	struct langwell_ep	*ep;
-	char			name[14];
-	int			i;
-
-	dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	/* initialize ep0 */
-	ep = &dev->ep[0];
-	ep->dev = dev;
-	strncpy(ep->name, "ep0", sizeof(ep->name));
-	ep->ep.name = ep->name;
-	ep->ep.ops = &langwell_ep_ops;
-	ep->stopped = 0;
-	ep->ep.maxpacket = EP0_MAX_PKT_SIZE;
-	ep->ep_num = 0;
-	ep->ep.desc = &langwell_ep0_desc;
-	INIT_LIST_HEAD(&ep->queue);
-
-	ep->ep_type = USB_ENDPOINT_XFER_CONTROL;
-
-	/* initialize other endpoints */
-	for (i = 2; i < dev->ep_max; i++) {
-		ep = &dev->ep[i];
-		if (i % 2)
-			snprintf(name, sizeof(name), "ep%din", i / 2);
-		else
-			snprintf(name, sizeof(name), "ep%dout", i / 2);
-		ep->dev = dev;
-		strncpy(ep->name, name, sizeof(ep->name));
-		ep->ep.name = ep->name;
-
-		ep->ep.ops = &langwell_ep_ops;
-		ep->stopped = 0;
-		ep->ep.maxpacket = (unsigned short) ~0;
-		ep->ep_num = i / 2;
-
-		INIT_LIST_HEAD(&ep->queue);
-		list_add_tail(&ep->ep.ep_list, &dev->gadget.ep_list);
-	}
-
-	dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-	return 0;
-}
-
-
-/* enable interrupt and set controller to run state */
-static void langwell_udc_start(struct langwell_udc *dev)
-{
-	u32	usbintr, usbcmd;
-	dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	/* enable interrupts */
-	usbintr = INTR_ULPIE	/* ULPI */
-		| INTR_SLE	/* suspend */
-		/* | INTR_SRE	SOF received */
-		| INTR_URE	/* USB reset */
-		| INTR_AAE	/* async advance */
-		| INTR_SEE	/* system error */
-		| INTR_FRE	/* frame list rollover */
-		| INTR_PCE	/* port change detect */
-		| INTR_UEE	/* USB error interrupt */
-		| INTR_UE;	/* USB interrupt */
-	writel(usbintr, &dev->op_regs->usbintr);
-
-	/* clear stopped bit */
-	dev->stopped = 0;
-
-	/* set controller to run */
-	usbcmd = readl(&dev->op_regs->usbcmd);
-	usbcmd |= CMD_RUNSTOP;
-	writel(usbcmd, &dev->op_regs->usbcmd);
-
-	dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-}
-
-
-/* disable interrupt and set controller to stop state */
-static void langwell_udc_stop(struct langwell_udc *dev)
-{
-	u32	usbcmd;
-
-	dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	/* disable all interrupts */
-	writel(0, &dev->op_regs->usbintr);
-
-	/* set stopped bit */
-	dev->stopped = 1;
-
-	/* set controller to stop state */
-	usbcmd = readl(&dev->op_regs->usbcmd);
-	usbcmd &= ~CMD_RUNSTOP;
-	writel(usbcmd, &dev->op_regs->usbcmd);
-
-	dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-}
-
-
-/* stop all USB activities */
-static void stop_activity(struct langwell_udc *dev)
-{
-	struct langwell_ep	*ep;
-	dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	nuke(&dev->ep[0], -ESHUTDOWN);
-
-	list_for_each_entry(ep, &dev->gadget.ep_list, ep.ep_list) {
-		nuke(ep, -ESHUTDOWN);
-	}
-
-	/* report disconnect; the driver is already quiesced */
-	if (dev->driver) {
-		spin_unlock(&dev->lock);
-		dev->driver->disconnect(&dev->gadget);
-		spin_lock(&dev->lock);
-	}
-
-	dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-/* device "function" sysfs attribute file */
-static ssize_t show_function(struct device *_dev,
-		struct device_attribute *attr, char *buf)
-{
-	struct langwell_udc	*dev = dev_get_drvdata(_dev);
-
-	if (!dev->driver || !dev->driver->function
-			|| strlen(dev->driver->function) > PAGE_SIZE)
-		return 0;
-
-	return scnprintf(buf, PAGE_SIZE, "%s\n", dev->driver->function);
-}
-static DEVICE_ATTR(function, S_IRUGO, show_function, NULL);
-
-
-static inline enum usb_device_speed lpm_device_speed(u32 reg)
-{
-	switch (LPM_PSPD(reg)) {
-	case LPM_SPEED_HIGH:
-		return USB_SPEED_HIGH;
-	case LPM_SPEED_FULL:
-		return USB_SPEED_FULL;
-	case LPM_SPEED_LOW:
-		return USB_SPEED_LOW;
-	default:
-		return USB_SPEED_UNKNOWN;
-	}
-}
-
-/* device "langwell_udc" sysfs attribute file */
-static ssize_t show_langwell_udc(struct device *_dev,
-		struct device_attribute *attr, char *buf)
-{
-	struct langwell_udc	*dev = dev_get_drvdata(_dev);
-	struct langwell_request *req;
-	struct langwell_ep	*ep = NULL;
-	char			*next;
-	unsigned		size;
-	unsigned		t;
-	unsigned		i;
-	unsigned long		flags;
-	u32			tmp_reg;
-
-	next = buf;
-	size = PAGE_SIZE;
-	spin_lock_irqsave(&dev->lock, flags);
-
-	/* driver basic information */
-	t = scnprintf(next, size,
-			DRIVER_DESC "\n"
-			"%s version: %s\n"
-			"Gadget driver: %s\n\n",
-			driver_name, DRIVER_VERSION,
-			dev->driver ? dev->driver->driver.name : "(none)");
-	size -= t;
-	next += t;
-
-	/* device registers */
-	tmp_reg = readl(&dev->op_regs->usbcmd);
-	t = scnprintf(next, size,
-			"USBCMD reg:\n"
-			"SetupTW: %d\n"
-			"Run/Stop: %s\n\n",
-			(tmp_reg & CMD_SUTW) ? 1 : 0,
-			(tmp_reg & CMD_RUNSTOP) ? "Run" : "Stop");
-	size -= t;
-	next += t;
-
-	tmp_reg = readl(&dev->op_regs->usbsts);
-	t = scnprintf(next, size,
-			"USB Status Reg:\n"
-			"Device Suspend: %d\n"
-			"Reset Received: %d\n"
-			"System Error: %s\n"
-			"USB Error Interrupt: %s\n\n",
-			(tmp_reg & STS_SLI) ? 1 : 0,
-			(tmp_reg & STS_URI) ? 1 : 0,
-			(tmp_reg & STS_SEI) ? "Error" : "No error",
-			(tmp_reg & STS_UEI) ? "Error detected" : "No error");
-	size -= t;
-	next += t;
-
-	tmp_reg = readl(&dev->op_regs->usbintr);
-	t = scnprintf(next, size,
-			"USB Intrrupt Enable Reg:\n"
-			"Sleep Enable: %d\n"
-			"SOF Received Enable: %d\n"
-			"Reset Enable: %d\n"
-			"System Error Enable: %d\n"
-			"Port Change Dectected Enable: %d\n"
-			"USB Error Intr Enable: %d\n"
-			"USB Intr Enable: %d\n\n",
-			(tmp_reg & INTR_SLE) ? 1 : 0,
-			(tmp_reg & INTR_SRE) ? 1 : 0,
-			(tmp_reg & INTR_URE) ? 1 : 0,
-			(tmp_reg & INTR_SEE) ? 1 : 0,
-			(tmp_reg & INTR_PCE) ? 1 : 0,
-			(tmp_reg & INTR_UEE) ? 1 : 0,
-			(tmp_reg & INTR_UE) ? 1 : 0);
-	size -= t;
-	next += t;
-
-	tmp_reg = readl(&dev->op_regs->frindex);
-	t = scnprintf(next, size,
-			"USB Frame Index Reg:\n"
-			"Frame Number is 0x%08x\n\n",
-			(tmp_reg & FRINDEX_MASK));
-	size -= t;
-	next += t;
-
-	tmp_reg = readl(&dev->op_regs->deviceaddr);
-	t = scnprintf(next, size,
-			"USB Device Address Reg:\n"
-			"Device Addr is 0x%x\n\n",
-			USBADR(tmp_reg));
-	size -= t;
-	next += t;
-
-	tmp_reg = readl(&dev->op_regs->endpointlistaddr);
-	t = scnprintf(next, size,
-			"USB Endpoint List Address Reg:\n"
-			"Endpoint List Pointer is 0x%x\n\n",
-			EPBASE(tmp_reg));
-	size -= t;
-	next += t;
-
-	tmp_reg = readl(&dev->op_regs->portsc1);
-	t = scnprintf(next, size,
-		"USB Port Status & Control Reg:\n"
-		"Port Reset: %s\n"
-		"Port Suspend Mode: %s\n"
-		"Over-current Change: %s\n"
-		"Port Enable/Disable Change: %s\n"
-		"Port Enabled/Disabled: %s\n"
-		"Current Connect Status: %s\n"
-		"LPM Suspend Status: %s\n\n",
-		(tmp_reg & PORTS_PR) ? "Reset" : "Not Reset",
-		(tmp_reg & PORTS_SUSP) ? "Suspend " : "Not Suspend",
-		(tmp_reg & PORTS_OCC) ? "Detected" : "No",
-		(tmp_reg & PORTS_PEC) ? "Changed" : "Not Changed",
-		(tmp_reg & PORTS_PE) ? "Enable" : "Not Correct",
-		(tmp_reg & PORTS_CCS) ?  "Attached" : "Not Attached",
-		(tmp_reg & PORTS_SLP) ? "LPM L1" : "LPM L0");
-	size -= t;
-	next += t;
-
-	tmp_reg = readl(&dev->op_regs->devlc);
-	t = scnprintf(next, size,
-		"Device LPM Control Reg:\n"
-		"Parallel Transceiver : %d\n"
-		"Serial Transceiver : %d\n"
-		"Port Speed: %s\n"
-		"Port Force Full Speed Connenct: %s\n"
-		"PHY Low Power Suspend Clock: %s\n"
-		"BmAttributes: %d\n\n",
-		LPM_PTS(tmp_reg),
-		(tmp_reg & LPM_STS) ? 1 : 0,
-		usb_speed_string(lpm_device_speed(tmp_reg)),
-		(tmp_reg & LPM_PFSC) ? "Force Full Speed" : "Not Force",
-		(tmp_reg & LPM_PHCD) ? "Disabled" : "Enabled",
-		LPM_BA(tmp_reg));
-	size -= t;
-	next += t;
-
-	tmp_reg = readl(&dev->op_regs->usbmode);
-	t = scnprintf(next, size,
-			"USB Mode Reg:\n"
-			"Controller Mode is : %s\n\n", ({
-				char *s;
-				switch (MODE_CM(tmp_reg)) {
-				case MODE_IDLE:
-					s = "Idle"; break;
-				case MODE_DEVICE:
-					s = "Device Controller"; break;
-				case MODE_HOST:
-					s = "Host Controller"; break;
-				default:
-					s = "None"; break;
-				}
-				s;
-			}));
-	size -= t;
-	next += t;
-
-	tmp_reg = readl(&dev->op_regs->endptsetupstat);
-	t = scnprintf(next, size,
-			"Endpoint Setup Status Reg:\n"
-			"SETUP on ep 0x%04x\n\n",
-			tmp_reg & SETUPSTAT_MASK);
-	size -= t;
-	next += t;
-
-	for (i = 0; i < dev->ep_max / 2; i++) {
-		tmp_reg = readl(&dev->op_regs->endptctrl[i]);
-		t = scnprintf(next, size, "EP Ctrl Reg [%d]: 0x%08x\n",
-				i, tmp_reg);
-		size -= t;
-		next += t;
-	}
-	tmp_reg = readl(&dev->op_regs->endptprime);
-	t = scnprintf(next, size, "EP Prime Reg: 0x%08x\n\n", tmp_reg);
-	size -= t;
-	next += t;
-
-	/* langwell_udc, langwell_ep, langwell_request structure information */
-	ep = &dev->ep[0];
-	t = scnprintf(next, size, "%s MaxPacketSize: 0x%x, ep_num: %d\n",
-			ep->ep.name, ep->ep.maxpacket, ep->ep_num);
-	size -= t;
-	next += t;
-
-	if (list_empty(&ep->queue)) {
-		t = scnprintf(next, size, "its req queue is empty\n\n");
-		size -= t;
-		next += t;
-	} else {
-		list_for_each_entry(req, &ep->queue, queue) {
-			t = scnprintf(next, size,
-				"req %p actual 0x%x length 0x%x  buf %p\n",
-				&req->req, req->req.actual,
-				req->req.length, req->req.buf);
-			size -= t;
-			next += t;
-		}
-	}
-	/* other gadget->eplist ep */
-	list_for_each_entry(ep, &dev->gadget.ep_list, ep.ep_list) {
-		if (ep->ep.desc) {
-			t = scnprintf(next, size,
-					"\n%s MaxPacketSize: 0x%x, "
-					"ep_num: %d\n",
-					ep->ep.name, ep->ep.maxpacket,
-					ep->ep_num);
-			size -= t;
-			next += t;
-
-			if (list_empty(&ep->queue)) {
-				t = scnprintf(next, size,
-						"its req queue is empty\n\n");
-				size -= t;
-				next += t;
-			} else {
-				list_for_each_entry(req, &ep->queue, queue) {
-					t = scnprintf(next, size,
-						"req %p actual 0x%x length "
-						"0x%x  buf %p\n",
-						&req->req, req->req.actual,
-						req->req.length, req->req.buf);
-					size -= t;
-					next += t;
-				}
-			}
-		}
-	}
-
-	spin_unlock_irqrestore(&dev->lock, flags);
-	return PAGE_SIZE - size;
-}
-static DEVICE_ATTR(langwell_udc, S_IRUGO, show_langwell_udc, NULL);
-
-
-/* device "remote_wakeup" sysfs attribute file */
-static ssize_t store_remote_wakeup(struct device *_dev,
-		struct device_attribute *attr, const char *buf, size_t count)
-{
-	struct langwell_udc	*dev = dev_get_drvdata(_dev);
-	unsigned long		flags;
-	ssize_t			rc = count;
-
-	if (count > 2)
-		return -EINVAL;
-
-	if (count > 0 && buf[count-1] == '\n')
-		((char *) buf)[count-1] = 0;
-
-	if (buf[0] != '1')
-		return -EINVAL;
-
-	/* force remote wakeup enabled in case gadget driver doesn't support */
-	spin_lock_irqsave(&dev->lock, flags);
-	dev->remote_wakeup = 1;
-	dev->dev_status |= (1 << USB_DEVICE_REMOTE_WAKEUP);
-	spin_unlock_irqrestore(&dev->lock, flags);
-
-	langwell_wakeup(&dev->gadget);
-
-	return rc;
-}
-static DEVICE_ATTR(remote_wakeup, S_IWUSR, NULL, store_remote_wakeup);
-
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * when a driver is successfully registered, it will receive
- * control requests including set_configuration(), which enables
- * non-control requests.  then usb traffic follows until a
- * disconnect is reported.  then a host may connect again, or
- * the driver might get unbound.
- */
-
-static int langwell_start(struct usb_gadget *g,
-		struct usb_gadget_driver *driver)
-{
-	struct langwell_udc	*dev = gadget_to_langwell(g);
-	unsigned long		flags;
-	int			retval;
-
-	dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	spin_lock_irqsave(&dev->lock, flags);
-
-	/* hook up the driver ... */
-	driver->driver.bus = NULL;
-	dev->driver = driver;
-	dev->gadget.dev.driver = &driver->driver;
-
-	spin_unlock_irqrestore(&dev->lock, flags);
-
-	retval = device_create_file(&dev->pdev->dev, &dev_attr_function);
-	if (retval)
-		goto err;
-
-	dev->usb_state = USB_STATE_ATTACHED;
-	dev->ep0_state = WAIT_FOR_SETUP;
-	dev->ep0_dir = USB_DIR_OUT;
-
-	/* enable interrupt and set controller to run state */
-	if (dev->got_irq)
-		langwell_udc_start(dev);
-
-	dev_vdbg(&dev->pdev->dev,
-			"After langwell_udc_start(), print all registers:\n");
-	print_all_registers(dev);
-
-	dev_info(&dev->pdev->dev, "register driver: %s\n",
-			driver->driver.name);
-	dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-
-	return 0;
-
-err:
-	dev->gadget.dev.driver = NULL;
-	dev->driver = NULL;
-
-	dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-
-	return retval;
-}
-
-/* unregister gadget driver */
-static int langwell_stop(struct usb_gadget *g,
-		struct usb_gadget_driver *driver)
-{
-	struct langwell_udc	*dev = gadget_to_langwell(g);
-	unsigned long		flags;
-
-	dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	/* exit PHY low power suspend */
-	if (dev->pdev->device != 0x0829)
-		langwell_phy_low_power(dev, 0);
-
-	/* unbind OTG transceiver */
-	if (dev->transceiver)
-		(void)otg_set_peripheral(dev->transceiver->otg, 0);
-
-	/* disable interrupt and set controller to stop state */
-	langwell_udc_stop(dev);
-
-	dev->usb_state = USB_STATE_ATTACHED;
-	dev->ep0_state = WAIT_FOR_SETUP;
-	dev->ep0_dir = USB_DIR_OUT;
-
-	spin_lock_irqsave(&dev->lock, flags);
-
-	/* stop all usb activities */
-	dev->gadget.speed = USB_SPEED_UNKNOWN;
-	dev->gadget.dev.driver = NULL;
-	dev->driver = NULL;
-	stop_activity(dev);
-	spin_unlock_irqrestore(&dev->lock, flags);
-
-	device_remove_file(&dev->pdev->dev, &dev_attr_function);
-
-	dev_info(&dev->pdev->dev, "unregistered driver '%s'\n",
-			driver->driver.name);
-	dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-
-	return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * setup tripwire is used as a semaphore to ensure that the setup data
- * payload is extracted from a dQH without being corrupted
- */
-static void setup_tripwire(struct langwell_udc *dev)
-{
-	u32			usbcmd,
-				endptsetupstat;
-	unsigned long		timeout;
-	struct langwell_dqh	*dqh;
-
-	dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	/* ep0 OUT dQH */
-	dqh = &dev->ep_dqh[EP_DIR_OUT];
-
-	/* Write-Clear endptsetupstat */
-	endptsetupstat = readl(&dev->op_regs->endptsetupstat);
-	writel(endptsetupstat, &dev->op_regs->endptsetupstat);
-
-	/* wait until endptsetupstat is cleared */
-	timeout = jiffies + SETUPSTAT_TIMEOUT;
-	while (readl(&dev->op_regs->endptsetupstat)) {
-		if (time_after(jiffies, timeout)) {
-			dev_err(&dev->pdev->dev, "setup_tripwire timeout\n");
-			break;
-		}
-		cpu_relax();
-	}
-
-	/* while a hazard exists when setup packet arrives */
-	do {
-		/* set setup tripwire bit */
-		usbcmd = readl(&dev->op_regs->usbcmd);
-		writel(usbcmd | CMD_SUTW, &dev->op_regs->usbcmd);
-
-		/* copy the setup packet to local buffer */
-		memcpy(&dev->local_setup_buff, &dqh->dqh_setup, 8);
-	} while (!(readl(&dev->op_regs->usbcmd) & CMD_SUTW));
-
-	/* Write-Clear setup tripwire bit */
-	usbcmd = readl(&dev->op_regs->usbcmd);
-	writel(usbcmd & ~CMD_SUTW, &dev->op_regs->usbcmd);
-
-	dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-}
-
-
-/* protocol ep0 stall, will automatically be cleared on new transaction */
-static void ep0_stall(struct langwell_udc *dev)
-{
-	u32	endptctrl;
-
-	dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	/* set TX and RX to stall */
-	endptctrl = readl(&dev->op_regs->endptctrl[0]);
-	endptctrl |= EPCTRL_TXS | EPCTRL_RXS;
-	writel(endptctrl, &dev->op_regs->endptctrl[0]);
-
-	/* update ep0 state */
-	dev->ep0_state = WAIT_FOR_SETUP;
-	dev->ep0_dir = USB_DIR_OUT;
-
-	dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-}
-
-
-/* PRIME a status phase for ep0 */
-static int prime_status_phase(struct langwell_udc *dev, int dir)
-{
-	struct langwell_request	*req;
-	struct langwell_ep	*ep;
-	int			status = 0;
-
-	dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	if (dir == EP_DIR_IN)
-		dev->ep0_dir = USB_DIR_IN;
-	else
-		dev->ep0_dir = USB_DIR_OUT;
-
-	ep = &dev->ep[0];
-	dev->ep0_state = WAIT_FOR_OUT_STATUS;
-
-	req = dev->status_req;
-
-	req->ep = ep;
-	req->req.length = 0;
-	req->req.status = -EINPROGRESS;
-	req->req.actual = 0;
-	req->req.complete = NULL;
-	req->dtd_count = 0;
-
-	if (!req_to_dtd(req))
-		status = queue_dtd(ep, req);
-	else
-		return -ENOMEM;
-
-	if (status)
-		dev_err(&dev->pdev->dev, "can't queue ep0 status request\n");
-
-	list_add_tail(&req->queue, &ep->queue);
-
-	dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-	return status;
-}
-
-
-/* SET_ADDRESS request routine */
-static void set_address(struct langwell_udc *dev, u16 value,
-		u16 index, u16 length)
-{
-	dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	/* save the new address to device struct */
-	dev->dev_addr = (u8) value;
-	dev_vdbg(&dev->pdev->dev, "dev->dev_addr = %d\n", dev->dev_addr);
-
-	/* update usb state */
-	dev->usb_state = USB_STATE_ADDRESS;
-
-	/* STATUS phase */
-	if (prime_status_phase(dev, EP_DIR_IN))
-		ep0_stall(dev);
-
-	dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-}
-
-
-/* return endpoint by windex */
-static struct langwell_ep *get_ep_by_windex(struct langwell_udc *dev,
-		u16 wIndex)
-{
-	struct langwell_ep		*ep;
-	dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	if ((wIndex & USB_ENDPOINT_NUMBER_MASK) == 0)
-		return &dev->ep[0];
-
-	list_for_each_entry(ep, &dev->gadget.ep_list, ep.ep_list) {
-		u8	bEndpointAddress;
-		if (!ep->ep.desc)
-			continue;
-
-		bEndpointAddress = ep->ep.desc->bEndpointAddress;
-		if ((wIndex ^ bEndpointAddress) & USB_DIR_IN)
-			continue;
-
-		if ((wIndex & USB_ENDPOINT_NUMBER_MASK)
-			== (bEndpointAddress & USB_ENDPOINT_NUMBER_MASK))
-			return ep;
-	}
-
-	dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-	return NULL;
-}
-
-
-/* return whether endpoint is stalled, 0: not stalled; 1: stalled */
-static int ep_is_stall(struct langwell_ep *ep)
-{
-	struct langwell_udc	*dev = ep->dev;
-	u32			endptctrl;
-	int			retval;
-
-	dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	endptctrl = readl(&dev->op_regs->endptctrl[ep->ep_num]);
-	if (is_in(ep))
-		retval = endptctrl & EPCTRL_TXS ? 1 : 0;
-	else
-		retval = endptctrl & EPCTRL_RXS ? 1 : 0;
-
-	dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-	return retval;
-}
-
-
-/* GET_STATUS request routine */
-static void get_status(struct langwell_udc *dev, u8 request_type, u16 value,
-		u16 index, u16 length)
-{
-	struct langwell_request	*req;
-	struct langwell_ep	*ep;
-	u16	status_data = 0;	/* 16 bits cpu view status data */
-	int	status = 0;
-
-	dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	ep = &dev->ep[0];
-
-	if ((request_type & USB_RECIP_MASK) == USB_RECIP_DEVICE) {
-		/* get device status */
-		status_data = dev->dev_status;
-	} else if ((request_type & USB_RECIP_MASK) == USB_RECIP_INTERFACE) {
-		/* get interface status */
-		status_data = 0;
-	} else if ((request_type & USB_RECIP_MASK) == USB_RECIP_ENDPOINT) {
-		/* get endpoint status */
-		struct langwell_ep	*epn;
-		epn = get_ep_by_windex(dev, index);
-		/* stall if endpoint doesn't exist */
-		if (!epn)
-			goto stall;
-
-		status_data = ep_is_stall(epn) << USB_ENDPOINT_HALT;
-	}
-
-	dev_dbg(&dev->pdev->dev, "get status data: 0x%04x\n", status_data);
-
-	dev->ep0_dir = USB_DIR_IN;
-
-	/* borrow the per device status_req */
-	req = dev->status_req;
-
-	/* fill in the reqest structure */
-	*((u16 *) req->req.buf) = cpu_to_le16(status_data);
-	req->ep = ep;
-	req->req.length = 2;
-	req->req.status = -EINPROGRESS;
-	req->req.actual = 0;
-	req->req.complete = NULL;
-	req->dtd_count = 0;
-
-	/* prime the data phase */
-	if (!req_to_dtd(req))
-		status = queue_dtd(ep, req);
-	else			/* no mem */
-		goto stall;
-
-	if (status) {
-		dev_err(&dev->pdev->dev,
-				"response error on GET_STATUS request\n");
-		goto stall;
-	}
-
-	list_add_tail(&req->queue, &ep->queue);
-	dev->ep0_state = DATA_STATE_XMIT;
-
-	dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-	return;
-stall:
-	ep0_stall(dev);
-	dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-}
-
-
-/* setup packet interrupt handler */
-static void handle_setup_packet(struct langwell_udc *dev,
-		struct usb_ctrlrequest *setup)
-{
-	u16	wValue = le16_to_cpu(setup->wValue);
-	u16	wIndex = le16_to_cpu(setup->wIndex);
-	u16	wLength = le16_to_cpu(setup->wLength);
-	u32	portsc1;
-
-	dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	/* ep0 fifo flush */
-	nuke(&dev->ep[0], -ESHUTDOWN);
-
-	dev_dbg(&dev->pdev->dev, "SETUP %02x.%02x v%04x i%04x l%04x\n",
-			setup->bRequestType, setup->bRequest,
-			wValue, wIndex, wLength);
-
-	/* RNDIS gadget delegate */
-	if ((setup->bRequestType == 0x21) && (setup->bRequest == 0x00)) {
-		/* USB_CDC_SEND_ENCAPSULATED_COMMAND */
-		goto delegate;
-	}
-
-	/* USB_CDC_GET_ENCAPSULATED_RESPONSE */
-	if ((setup->bRequestType == 0xa1) && (setup->bRequest == 0x01)) {
-		/* USB_CDC_GET_ENCAPSULATED_RESPONSE */
-		goto delegate;
-	}
-
-	/* We process some stardard setup requests here */
-	switch (setup->bRequest) {
-	case USB_REQ_GET_STATUS:
-		dev_dbg(&dev->pdev->dev, "SETUP: USB_REQ_GET_STATUS\n");
-		/* get status, DATA and STATUS phase */
-		if ((setup->bRequestType & (USB_DIR_IN | USB_TYPE_MASK))
-					!= (USB_DIR_IN | USB_TYPE_STANDARD))
-			break;
-		get_status(dev, setup->bRequestType, wValue, wIndex, wLength);
-		goto end;
-
-	case USB_REQ_SET_ADDRESS:
-		dev_dbg(&dev->pdev->dev, "SETUP: USB_REQ_SET_ADDRESS\n");
-		/* STATUS phase */
-		if (setup->bRequestType != (USB_DIR_OUT | USB_TYPE_STANDARD
-						| USB_RECIP_DEVICE))
-			break;
-		set_address(dev, wValue, wIndex, wLength);
-		goto end;
-
-	case USB_REQ_CLEAR_FEATURE:
-	case USB_REQ_SET_FEATURE:
-		/* STATUS phase */
-	{
-		int rc = -EOPNOTSUPP;
-		if (setup->bRequest == USB_REQ_SET_FEATURE)
-			dev_dbg(&dev->pdev->dev,
-					"SETUP: USB_REQ_SET_FEATURE\n");
-		else if (setup->bRequest == USB_REQ_CLEAR_FEATURE)
-			dev_dbg(&dev->pdev->dev,
-					"SETUP: USB_REQ_CLEAR_FEATURE\n");
-
-		if ((setup->bRequestType & (USB_RECIP_MASK | USB_TYPE_MASK))
-				== (USB_RECIP_ENDPOINT | USB_TYPE_STANDARD)) {
-			struct langwell_ep	*epn;
-			epn = get_ep_by_windex(dev, wIndex);
-			/* stall if endpoint doesn't exist */
-			if (!epn) {
-				ep0_stall(dev);
-				goto end;
-			}
-
-			if (wValue != 0 || wLength != 0
-					|| epn->ep_num > dev->ep_max)
-				break;
-
-			spin_unlock(&dev->lock);
-			rc = langwell_ep_set_halt(&epn->ep,
-				(setup->bRequest == USB_REQ_SET_FEATURE)
-				? 1 : 0);
-			spin_lock(&dev->lock);
-
-		} else if ((setup->bRequestType & (USB_RECIP_MASK
-				| USB_TYPE_MASK)) == (USB_RECIP_DEVICE
-				| USB_TYPE_STANDARD)) {
-			rc = 0;
-			switch (wValue) {
-			case USB_DEVICE_REMOTE_WAKEUP:
-				if (setup->bRequest == USB_REQ_SET_FEATURE) {
-					dev->remote_wakeup = 1;
-					dev->dev_status |= (1 << wValue);
-				} else {
-					dev->remote_wakeup = 0;
-					dev->dev_status &= ~(1 << wValue);
-				}
-				break;
-			case USB_DEVICE_TEST_MODE:
-				dev_dbg(&dev->pdev->dev, "SETUP: TEST MODE\n");
-				if ((wIndex & 0xff) ||
-					(dev->gadget.speed != USB_SPEED_HIGH))
-					ep0_stall(dev);
-
-				switch (wIndex >> 8) {
-				case TEST_J:
-				case TEST_K:
-				case TEST_SE0_NAK:
-				case TEST_PACKET:
-				case TEST_FORCE_EN:
-					if (prime_status_phase(dev, EP_DIR_IN))
-						ep0_stall(dev);
-					portsc1 = readl(&dev->op_regs->portsc1);
-					portsc1 |= (wIndex & 0xf00) << 8;
-					writel(portsc1, &dev->op_regs->portsc1);
-					goto end;
-				default:
-					rc = -EOPNOTSUPP;
-				}
-				break;
-			default:
-				rc = -EOPNOTSUPP;
-				break;
-			}
-
-			if (!gadget_is_otg(&dev->gadget))
-				break;
-			else if (setup->bRequest == USB_DEVICE_B_HNP_ENABLE)
-				dev->gadget.b_hnp_enable = 1;
-			else if (setup->bRequest == USB_DEVICE_A_HNP_SUPPORT)
-				dev->gadget.a_hnp_support = 1;
-			else if (setup->bRequest ==
-					USB_DEVICE_A_ALT_HNP_SUPPORT)
-				dev->gadget.a_alt_hnp_support = 1;
-			else
-				break;
-		} else
-			break;
-
-		if (rc == 0) {
-			if (prime_status_phase(dev, EP_DIR_IN))
-				ep0_stall(dev);
-		}
-		goto end;
-	}
-
-	case USB_REQ_GET_DESCRIPTOR:
-		dev_dbg(&dev->pdev->dev,
-				"SETUP: USB_REQ_GET_DESCRIPTOR\n");
-		goto delegate;
-
-	case USB_REQ_SET_DESCRIPTOR:
-		dev_dbg(&dev->pdev->dev,
-				"SETUP: USB_REQ_SET_DESCRIPTOR unsupported\n");
-		goto delegate;
-
-	case USB_REQ_GET_CONFIGURATION:
-		dev_dbg(&dev->pdev->dev,
-				"SETUP: USB_REQ_GET_CONFIGURATION\n");
-		goto delegate;
-
-	case USB_REQ_SET_CONFIGURATION:
-		dev_dbg(&dev->pdev->dev,
-				"SETUP: USB_REQ_SET_CONFIGURATION\n");
-		goto delegate;
-
-	case USB_REQ_GET_INTERFACE:
-		dev_dbg(&dev->pdev->dev,
-				"SETUP: USB_REQ_GET_INTERFACE\n");
-		goto delegate;
-
-	case USB_REQ_SET_INTERFACE:
-		dev_dbg(&dev->pdev->dev,
-				"SETUP: USB_REQ_SET_INTERFACE\n");
-		goto delegate;
-
-	case USB_REQ_SYNCH_FRAME:
-		dev_dbg(&dev->pdev->dev,
-				"SETUP: USB_REQ_SYNCH_FRAME unsupported\n");
-		goto delegate;
-
-	default:
-		/* delegate USB standard requests to the gadget driver */
-		goto delegate;
-delegate:
-		/* USB requests handled by gadget */
-		if (wLength) {
-			/* DATA phase from gadget, STATUS phase from udc */
-			dev->ep0_dir = (setup->bRequestType & USB_DIR_IN)
-					?  USB_DIR_IN : USB_DIR_OUT;
-			dev_vdbg(&dev->pdev->dev,
-					"dev->ep0_dir = 0x%x, wLength = %d\n",
-					dev->ep0_dir, wLength);
-			spin_unlock(&dev->lock);
-			if (dev->driver->setup(&dev->gadget,
-					&dev->local_setup_buff) < 0)
-				ep0_stall(dev);
-			spin_lock(&dev->lock);
-			dev->ep0_state = (setup->bRequestType & USB_DIR_IN)
-					?  DATA_STATE_XMIT : DATA_STATE_RECV;
-		} else {
-			/* no DATA phase, IN STATUS phase from gadget */
-			dev->ep0_dir = USB_DIR_IN;
-			dev_vdbg(&dev->pdev->dev,
-					"dev->ep0_dir = 0x%x, wLength = %d\n",
-					dev->ep0_dir, wLength);
-			spin_unlock(&dev->lock);
-			if (dev->driver->setup(&dev->gadget,
-					&dev->local_setup_buff) < 0)
-				ep0_stall(dev);
-			spin_lock(&dev->lock);
-			dev->ep0_state = WAIT_FOR_OUT_STATUS;
-		}
-		break;
-	}
-end:
-	dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-}
-
-
-/* transfer completion, process endpoint request and free the completed dTDs
- * for this request
- */
-static int process_ep_req(struct langwell_udc *dev, int index,
-		struct langwell_request *curr_req)
-{
-	struct langwell_dtd	*curr_dtd;
-	struct langwell_dqh	*curr_dqh;
-	int			td_complete, actual, remaining_length;
-	int			i, dir;
-	u8			dtd_status = 0;
-	int			retval = 0;
-
-	curr_dqh = &dev->ep_dqh[index];
-	dir = index % 2;
-
-	curr_dtd = curr_req->head;
-	td_complete = 0;
-	actual = curr_req->req.length;
-
-	dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	for (i = 0; i < curr_req->dtd_count; i++) {
-
-		/* command execution states by dTD */
-		dtd_status = curr_dtd->dtd_status;
-
-		barrier();
-		remaining_length = le16_to_cpu(curr_dtd->dtd_total);
-		actual -= remaining_length;
-
-		if (!dtd_status) {
-			/* transfers completed successfully */
-			if (!remaining_length) {
-				td_complete++;
-				dev_vdbg(&dev->pdev->dev,
-					"dTD transmitted successfully\n");
-			} else {
-				if (dir) {
-					dev_vdbg(&dev->pdev->dev,
-						"TX dTD remains data\n");
-					retval = -EPROTO;
-					break;
-
-				} else {
-					td_complete++;
-					break;
-				}
-			}
-		} else {
-			/* transfers completed with errors */
-			if (dtd_status & DTD_STS_ACTIVE) {
-				dev_dbg(&dev->pdev->dev,
-					"dTD status ACTIVE dQH[%d]\n", index);
-				retval = 1;
-				return retval;
-			} else if (dtd_status & DTD_STS_HALTED) {
-				dev_err(&dev->pdev->dev,
-					"dTD error %08x dQH[%d]\n",
-					dtd_status, index);
-				/* clear the errors and halt condition */
-				curr_dqh->dtd_status = 0;
-				retval = -EPIPE;
-				break;
-			} else if (dtd_status & DTD_STS_DBE) {
-				dev_dbg(&dev->pdev->dev,
-					"data buffer (overflow) error\n");
-				retval = -EPROTO;
-				break;
-			} else if (dtd_status & DTD_STS_TRE) {
-				dev_dbg(&dev->pdev->dev,
-					"transaction(ISO) error\n");
-				retval = -EILSEQ;
-				break;
-			} else
-				dev_err(&dev->pdev->dev,
-					"unknown error (0x%x)!\n",
-					dtd_status);
-		}
-
-		if (i != curr_req->dtd_count - 1)
-			curr_dtd = (struct langwell_dtd *)
-				curr_dtd->next_dtd_virt;
-	}
-
-	if (retval)
-		return retval;
-
-	curr_req->req.actual = actual;
-
-	dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-	return 0;
-}
-
-
-/* complete DATA or STATUS phase of ep0 prime status phase if needed */
-static void ep0_req_complete(struct langwell_udc *dev,
-		struct langwell_ep *ep0, struct langwell_request *req)
-{
-	u32	new_addr;
-	dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	if (dev->usb_state == USB_STATE_ADDRESS) {
-		/* set the new address */
-		new_addr = (u32)dev->dev_addr;
-		writel(new_addr << USBADR_SHIFT, &dev->op_regs->deviceaddr);
-
-		new_addr = USBADR(readl(&dev->op_regs->deviceaddr));
-		dev_vdbg(&dev->pdev->dev, "new_addr = %d\n", new_addr);
-	}
-
-	done(ep0, req, 0);
-
-	switch (dev->ep0_state) {
-	case DATA_STATE_XMIT:
-		/* receive status phase */
-		if (prime_status_phase(dev, EP_DIR_OUT))
-			ep0_stall(dev);
-		break;
-	case DATA_STATE_RECV:
-		/* send status phase */
-		if (prime_status_phase(dev, EP_DIR_IN))
-			ep0_stall(dev);
-		break;
-	case WAIT_FOR_OUT_STATUS:
-		dev->ep0_state = WAIT_FOR_SETUP;
-		break;
-	case WAIT_FOR_SETUP:
-		dev_err(&dev->pdev->dev, "unexpect ep0 packets\n");
-		break;
-	default:
-		ep0_stall(dev);
-		break;
-	}
-
-	dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-}
-
-
-/* USB transfer completion interrupt */
-static void handle_trans_complete(struct langwell_udc *dev)
-{
-	u32			complete_bits;
-	int			i, ep_num, dir, bit_mask, status;
-	struct langwell_ep	*epn;
-	struct langwell_request	*curr_req, *temp_req;
-
-	dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	complete_bits = readl(&dev->op_regs->endptcomplete);
-	dev_vdbg(&dev->pdev->dev, "endptcomplete register: 0x%08x\n",
-			complete_bits);
-
-	/* Write-Clear the bits in endptcomplete register */
-	writel(complete_bits, &dev->op_regs->endptcomplete);
-
-	if (!complete_bits) {
-		dev_dbg(&dev->pdev->dev, "complete_bits = 0\n");
-		goto done;
-	}
-
-	for (i = 0; i < dev->ep_max; i++) {
-		ep_num = i / 2;
-		dir = i % 2;
-
-		bit_mask = 1 << (ep_num + 16 * dir);
-
-		if (!(complete_bits & bit_mask))
-			continue;
-
-		/* ep0 */
-		if (i == 1)
-			epn = &dev->ep[0];
-		else
-			epn = &dev->ep[i];
-
-		if (epn->name == NULL) {
-			dev_warn(&dev->pdev->dev, "invalid endpoint\n");
-			continue;
-		}
-
-		if (i < 2)
-			/* ep0 in and out */
-			dev_dbg(&dev->pdev->dev, "%s-%s transfer completed\n",
-					epn->name,
-					is_in(epn) ? "in" : "out");
-		else
-			dev_dbg(&dev->pdev->dev, "%s transfer completed\n",
-					epn->name);
-
-		/* process the req queue until an uncomplete request */
-		list_for_each_entry_safe(curr_req, temp_req,
-				&epn->queue, queue) {
-			status = process_ep_req(dev, i, curr_req);
-			dev_vdbg(&dev->pdev->dev, "%s req status: %d\n",
-					epn->name, status);
-
-			if (status)
-				break;
-
-			/* write back status to req */
-			curr_req->req.status = status;
-
-			/* ep0 request completion */
-			if (ep_num == 0) {
-				ep0_req_complete(dev, epn, curr_req);
-				break;
-			} else {
-				done(epn, curr_req, status);
-			}
-		}
-	}
-done:
-	dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-}
-
-/* port change detect interrupt handler */
-static void handle_port_change(struct langwell_udc *dev)
-{
-	u32	portsc1, devlc;
-
-	dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	if (dev->bus_reset)
-		dev->bus_reset = 0;
-
-	portsc1 = readl(&dev->op_regs->portsc1);
-	devlc = readl(&dev->op_regs->devlc);
-	dev_vdbg(&dev->pdev->dev, "portsc1 = 0x%08x, devlc = 0x%08x\n",
-			portsc1, devlc);
-
-	/* bus reset is finished */
-	if (!(portsc1 & PORTS_PR)) {
-		/* get the speed */
-		dev->gadget.speed = lpm_device_speed(devlc);
-		dev_vdbg(&dev->pdev->dev, "dev->gadget.speed = %d\n",
-			dev->gadget.speed);
-	}
-
-	/* LPM L0 to L1 */
-	if (dev->lpm && dev->lpm_state == LPM_L0)
-		if (portsc1 & PORTS_SUSP && portsc1 & PORTS_SLP) {
-			dev_info(&dev->pdev->dev, "LPM L0 to L1\n");
-			dev->lpm_state = LPM_L1;
-		}
-
-	/* LPM L1 to L0, force resume or remote wakeup finished */
-	if (dev->lpm && dev->lpm_state == LPM_L1)
-		if (!(portsc1 & PORTS_SUSP)) {
-			dev_info(&dev->pdev->dev, "LPM L1 to L0\n");
-			dev->lpm_state = LPM_L0;
-		}
-
-	/* update USB state */
-	if (!dev->resume_state)
-		dev->usb_state = USB_STATE_DEFAULT;
-
-	dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-}
-
-
-/* USB reset interrupt handler */
-static void handle_usb_reset(struct langwell_udc *dev)
-{
-	u32		deviceaddr,
-			endptsetupstat,
-			endptcomplete;
-	unsigned long	timeout;
-
-	dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	/* Write-Clear the device address */
-	deviceaddr = readl(&dev->op_regs->deviceaddr);
-	writel(deviceaddr & ~USBADR_MASK, &dev->op_regs->deviceaddr);
-
-	dev->dev_addr = 0;
-
-	/* clear usb state */
-	dev->resume_state = 0;
-
-	/* LPM L1 to L0, reset */
-	if (dev->lpm)
-		dev->lpm_state = LPM_L0;
-
-	dev->ep0_dir = USB_DIR_OUT;
-	dev->ep0_state = WAIT_FOR_SETUP;
-
-	/* remote wakeup reset to 0 when the device is reset */
-	dev->remote_wakeup = 0;
-	dev->dev_status = 1 << USB_DEVICE_SELF_POWERED;
-	dev->gadget.b_hnp_enable = 0;
-	dev->gadget.a_hnp_support = 0;
-	dev->gadget.a_alt_hnp_support = 0;
-
-	/* Write-Clear all the setup token semaphores */
-	endptsetupstat = readl(&dev->op_regs->endptsetupstat);
-	writel(endptsetupstat, &dev->op_regs->endptsetupstat);
-
-	/* Write-Clear all the endpoint complete status bits */
-	endptcomplete = readl(&dev->op_regs->endptcomplete);
-	writel(endptcomplete, &dev->op_regs->endptcomplete);
-
-	/* wait until all endptprime bits cleared */
-	timeout = jiffies + PRIME_TIMEOUT;
-	while (readl(&dev->op_regs->endptprime)) {
-		if (time_after(jiffies, timeout)) {
-			dev_err(&dev->pdev->dev, "USB reset timeout\n");
-			break;
-		}
-		cpu_relax();
-	}
-
-	/* write 1s to endptflush register to clear any primed buffers */
-	writel((u32) ~0, &dev->op_regs->endptflush);
-
-	if (readl(&dev->op_regs->portsc1) & PORTS_PR) {
-		dev_vdbg(&dev->pdev->dev, "USB bus reset\n");
-		/* bus is reseting */
-		dev->bus_reset = 1;
-
-		/* reset all the queues, stop all USB activities */
-		stop_activity(dev);
-		dev->usb_state = USB_STATE_DEFAULT;
-	} else {
-		dev_vdbg(&dev->pdev->dev, "device controller reset\n");
-		/* controller reset */
-		langwell_udc_reset(dev);
-
-		/* reset all the queues, stop all USB activities */
-		stop_activity(dev);
-
-		/* reset ep0 dQH and endptctrl */
-		ep0_reset(dev);
-
-		/* enable interrupt and set controller to run state */
-		langwell_udc_start(dev);
-
-		dev->usb_state = USB_STATE_ATTACHED;
-	}
-
-	dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-}
-
-
-/* USB bus suspend/resume interrupt */
-static void handle_bus_suspend(struct langwell_udc *dev)
-{
-	dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	dev->resume_state = dev->usb_state;
-	dev->usb_state = USB_STATE_SUSPENDED;
-
-	/* report suspend to the driver */
-	if (dev->driver) {
-		if (dev->driver->suspend) {
-			spin_unlock(&dev->lock);
-			dev->driver->suspend(&dev->gadget);
-			spin_lock(&dev->lock);
-			dev_dbg(&dev->pdev->dev, "suspend %s\n",
-					dev->driver->driver.name);
-		}
-	}
-
-	/* enter PHY low power suspend */
-	if (dev->pdev->device != 0x0829)
-		langwell_phy_low_power(dev, 0);
-
-	dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-}
-
-
-static void handle_bus_resume(struct langwell_udc *dev)
-{
-	dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	dev->usb_state = dev->resume_state;
-	dev->resume_state = 0;
-
-	/* exit PHY low power suspend */
-	if (dev->pdev->device != 0x0829)
-		langwell_phy_low_power(dev, 0);
-
-	/* report resume to the driver */
-	if (dev->driver) {
-		if (dev->driver->resume) {
-			spin_unlock(&dev->lock);
-			dev->driver->resume(&dev->gadget);
-			spin_lock(&dev->lock);
-			dev_dbg(&dev->pdev->dev, "resume %s\n",
-					dev->driver->driver.name);
-		}
-	}
-
-	dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-}
-
-
-/* USB device controller interrupt handler */
-static irqreturn_t langwell_irq(int irq, void *_dev)
-{
-	struct langwell_udc	*dev = _dev;
-	u32			usbsts,
-				usbintr,
-				irq_sts,
-				portsc1;
-
-	dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	if (dev->stopped) {
-		dev_vdbg(&dev->pdev->dev, "handle IRQ_NONE\n");
-		dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-		return IRQ_NONE;
-	}
-
-	spin_lock(&dev->lock);
-
-	/* USB status */
-	usbsts = readl(&dev->op_regs->usbsts);
-
-	/* USB interrupt enable */
-	usbintr = readl(&dev->op_regs->usbintr);
-
-	irq_sts = usbsts & usbintr;
-	dev_vdbg(&dev->pdev->dev,
-			"usbsts = 0x%08x, usbintr = 0x%08x, irq_sts = 0x%08x\n",
-			usbsts, usbintr, irq_sts);
-
-	if (!irq_sts) {
-		dev_vdbg(&dev->pdev->dev, "handle IRQ_NONE\n");
-		dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-		spin_unlock(&dev->lock);
-		return IRQ_NONE;
-	}
-
-	/* Write-Clear interrupt status bits */
-	writel(irq_sts, &dev->op_regs->usbsts);
-
-	/* resume from suspend */
-	portsc1 = readl(&dev->op_regs->portsc1);
-	if (dev->usb_state == USB_STATE_SUSPENDED)
-		if (!(portsc1 & PORTS_SUSP))
-			handle_bus_resume(dev);
-
-	/* USB interrupt */
-	if (irq_sts & STS_UI) {
-		dev_vdbg(&dev->pdev->dev, "USB interrupt\n");
-
-		/* setup packet received from ep0 */
-		if (readl(&dev->op_regs->endptsetupstat)
-				& EP0SETUPSTAT_MASK) {
-			dev_vdbg(&dev->pdev->dev,
-				"USB SETUP packet received interrupt\n");
-			/* setup tripwire semaphone */
-			setup_tripwire(dev);
-			handle_setup_packet(dev, &dev->local_setup_buff);
-		}
-
-		/* USB transfer completion */
-		if (readl(&dev->op_regs->endptcomplete)) {
-			dev_vdbg(&dev->pdev->dev,
-				"USB transfer completion interrupt\n");
-			handle_trans_complete(dev);
-		}
-	}
-
-	/* SOF received interrupt (for ISO transfer) */
-	if (irq_sts & STS_SRI) {
-		/* FIXME */
-		/* dev_vdbg(&dev->pdev->dev, "SOF received interrupt\n"); */
-	}
-
-	/* port change detect interrupt */
-	if (irq_sts & STS_PCI) {
-		dev_vdbg(&dev->pdev->dev, "port change detect interrupt\n");
-		handle_port_change(dev);
-	}
-
-	/* suspend interrupt */
-	if (irq_sts & STS_SLI) {
-		dev_vdbg(&dev->pdev->dev, "suspend interrupt\n");
-		handle_bus_suspend(dev);
-	}
-
-	/* USB reset interrupt */
-	if (irq_sts & STS_URI) {
-		dev_vdbg(&dev->pdev->dev, "USB reset interrupt\n");
-		handle_usb_reset(dev);
-	}
-
-	/* USB error or system error interrupt */
-	if (irq_sts & (STS_UEI | STS_SEI)) {
-		/* FIXME */
-		dev_warn(&dev->pdev->dev, "error IRQ, irq_sts: %x\n", irq_sts);
-	}
-
-	spin_unlock(&dev->lock);
-
-	dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-	return IRQ_HANDLED;
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-/* release device structure */
-static void gadget_release(struct device *_dev)
-{
-	struct langwell_udc	*dev = dev_get_drvdata(_dev);
-
-	dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	complete(dev->done);
-
-	dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-	kfree(dev);
-}
-
-
-/* enable SRAM caching if SRAM detected */
-static void sram_init(struct langwell_udc *dev)
-{
-	struct pci_dev		*pdev = dev->pdev;
-
-	dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	dev->sram_addr = pci_resource_start(pdev, 1);
-	dev->sram_size = pci_resource_len(pdev, 1);
-	dev_info(&dev->pdev->dev, "Found private SRAM at %x size:%x\n",
-			dev->sram_addr, dev->sram_size);
-	dev->got_sram = 1;
-
-	if (pci_request_region(pdev, 1, kobject_name(&pdev->dev.kobj))) {
-		dev_warn(&dev->pdev->dev, "SRAM request failed\n");
-		dev->got_sram = 0;
-	} else if (!dma_declare_coherent_memory(&pdev->dev, dev->sram_addr,
-			dev->sram_addr, dev->sram_size, DMA_MEMORY_MAP)) {
-		dev_warn(&dev->pdev->dev, "SRAM DMA declare failed\n");
-		pci_release_region(pdev, 1);
-		dev->got_sram = 0;
-	}
-
-	dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-}
-
-
-/* release SRAM caching */
-static void sram_deinit(struct langwell_udc *dev)
-{
-	struct pci_dev *pdev = dev->pdev;
-
-	dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	dma_release_declared_memory(&pdev->dev);
-	pci_release_region(pdev, 1);
-
-	dev->got_sram = 0;
-
-	dev_info(&dev->pdev->dev, "release SRAM caching\n");
-	dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-}
-
-
-/* tear down the binding between this driver and the pci device */
-static void langwell_udc_remove(struct pci_dev *pdev)
-{
-	struct langwell_udc	*dev = pci_get_drvdata(pdev);
-
-	DECLARE_COMPLETION(done);
-
-	BUG_ON(dev->driver);
-	dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	dev->done = &done;
-
-	/* free dTD dma_pool and dQH */
-	if (dev->dtd_pool)
-		dma_pool_destroy(dev->dtd_pool);
-
-	if (dev->ep_dqh)
-		dma_free_coherent(&pdev->dev, dev->ep_dqh_size,
-			dev->ep_dqh, dev->ep_dqh_dma);
-
-	/* release SRAM caching */
-	if (dev->has_sram && dev->got_sram)
-		sram_deinit(dev);
-
-	if (dev->status_req) {
-		kfree(dev->status_req->req.buf);
-		kfree(dev->status_req);
-	}
-
-	kfree(dev->ep);
-
-	/* disable IRQ handler */
-	if (dev->got_irq)
-		free_irq(pdev->irq, dev);
-
-	if (dev->cap_regs)
-		iounmap(dev->cap_regs);
-
-	if (dev->region)
-		release_mem_region(pci_resource_start(pdev, 0),
-				pci_resource_len(pdev, 0));
-
-	if (dev->enabled)
-		pci_disable_device(pdev);
-
-	dev->cap_regs = NULL;
-
-	dev_info(&dev->pdev->dev, "unbind\n");
-	dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-
-	device_unregister(&dev->gadget.dev);
-	device_remove_file(&pdev->dev, &dev_attr_langwell_udc);
-	device_remove_file(&pdev->dev, &dev_attr_remote_wakeup);
-
-	pci_set_drvdata(pdev, NULL);
-
-	/* free dev, wait for the release() finished */
-	wait_for_completion(&done);
-}
-
-
-/*
- * wrap this driver around the specified device, but
- * don't respond over USB until a gadget driver binds to us.
- */
-static int langwell_udc_probe(struct pci_dev *pdev,
-		const struct pci_device_id *id)
-{
-	struct langwell_udc	*dev;
-	unsigned long		resource, len;
-	void			__iomem *base = NULL;
-	size_t			size;
-	int			retval;
-
-	/* alloc, and start init */
-	dev = kzalloc(sizeof *dev, GFP_KERNEL);
-	if (dev == NULL) {
-		retval = -ENOMEM;
-		goto error;
-	}
-
-	/* initialize device spinlock */
-	spin_lock_init(&dev->lock);
-
-	dev->pdev = pdev;
-	dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	pci_set_drvdata(pdev, dev);
-
-	/* now all the pci goodies ... */
-	if (pci_enable_device(pdev) < 0) {
-		retval = -ENODEV;
-		goto error;
-	}
-	dev->enabled = 1;
-
-	/* control register: BAR 0 */
-	resource = pci_resource_start(pdev, 0);
-	len = pci_resource_len(pdev, 0);
-	if (!request_mem_region(resource, len, driver_name)) {
-		dev_err(&dev->pdev->dev, "controller already in use\n");
-		retval = -EBUSY;
-		goto error;
-	}
-	dev->region = 1;
-
-	base = ioremap_nocache(resource, len);
-	if (base == NULL) {
-		dev_err(&dev->pdev->dev, "can't map memory\n");
-		retval = -EFAULT;
-		goto error;
-	}
-
-	dev->cap_regs = (struct langwell_cap_regs __iomem *) base;
-	dev_vdbg(&dev->pdev->dev, "dev->cap_regs: %p\n", dev->cap_regs);
-	dev->op_regs = (struct langwell_op_regs __iomem *)
-		(base + OP_REG_OFFSET);
-	dev_vdbg(&dev->pdev->dev, "dev->op_regs: %p\n", dev->op_regs);
-
-	/* irq setup after old hardware is cleaned up */
-	if (!pdev->irq) {
-		dev_err(&dev->pdev->dev, "No IRQ. Check PCI setup!\n");
-		retval = -ENODEV;
-		goto error;
-	}
-
-	dev->has_sram = 1;
-	dev->got_sram = 0;
-	dev_vdbg(&dev->pdev->dev, "dev->has_sram: %d\n", dev->has_sram);
-
-	/* enable SRAM caching if detected */
-	if (dev->has_sram && !dev->got_sram)
-		sram_init(dev);
-
-	dev_info(&dev->pdev->dev,
-			"irq %d, io mem: 0x%08lx, len: 0x%08lx, pci mem 0x%p\n",
-			pdev->irq, resource, len, base);
-	/* enables bus-mastering for device dev */
-	pci_set_master(pdev);
-
-	if (request_irq(pdev->irq, langwell_irq, IRQF_SHARED,
-				driver_name, dev) != 0) {
-		dev_err(&dev->pdev->dev,
-				"request interrupt %d failed\n", pdev->irq);
-		retval = -EBUSY;
-		goto error;
-	}
-	dev->got_irq = 1;
-
-	/* set stopped bit */
-	dev->stopped = 1;
-
-	/* capabilities and endpoint number */
-	dev->lpm = (readl(&dev->cap_regs->hccparams) & HCC_LEN) ? 1 : 0;
-	dev->dciversion = readw(&dev->cap_regs->dciversion);
-	dev->devcap = (readl(&dev->cap_regs->dccparams) & DEVCAP) ? 1 : 0;
-	dev_vdbg(&dev->pdev->dev, "dev->lpm: %d\n", dev->lpm);
-	dev_vdbg(&dev->pdev->dev, "dev->dciversion: 0x%04x\n",
-			dev->dciversion);
-	dev_vdbg(&dev->pdev->dev, "dccparams: 0x%08x\n",
-			readl(&dev->cap_regs->dccparams));
-	dev_vdbg(&dev->pdev->dev, "dev->devcap: %d\n", dev->devcap);
-	if (!dev->devcap) {
-		dev_err(&dev->pdev->dev, "can't support device mode\n");
-		retval = -ENODEV;
-		goto error;
-	}
-
-	/* a pair of endpoints (out/in) for each address */
-	dev->ep_max = DEN(readl(&dev->cap_regs->dccparams)) * 2;
-	dev_vdbg(&dev->pdev->dev, "dev->ep_max: %d\n", dev->ep_max);
-
-	/* allocate endpoints memory */
-	dev->ep = kzalloc(sizeof(struct langwell_ep) * dev->ep_max,
-			GFP_KERNEL);
-	if (!dev->ep) {
-		dev_err(&dev->pdev->dev, "allocate endpoints memory failed\n");
-		retval = -ENOMEM;
-		goto error;
-	}
-
-	/* allocate device dQH memory */
-	size = dev->ep_max * sizeof(struct langwell_dqh);
-	dev_vdbg(&dev->pdev->dev, "orig size = %zd\n", size);
-	if (size < DQH_ALIGNMENT)
-		size = DQH_ALIGNMENT;
-	else if ((size % DQH_ALIGNMENT) != 0) {
-		size += DQH_ALIGNMENT + 1;
-		size &= ~(DQH_ALIGNMENT - 1);
-	}
-	dev->ep_dqh = dma_alloc_coherent(&pdev->dev, size,
-					&dev->ep_dqh_dma, GFP_KERNEL);
-	if (!dev->ep_dqh) {
-		dev_err(&dev->pdev->dev, "allocate dQH memory failed\n");
-		retval = -ENOMEM;
-		goto error;
-	}
-	dev->ep_dqh_size = size;
-	dev_vdbg(&dev->pdev->dev, "ep_dqh_size = %zd\n", dev->ep_dqh_size);
-
-	/* initialize ep0 status request structure */
-	dev->status_req = kzalloc(sizeof(struct langwell_request), GFP_KERNEL);
-	if (!dev->status_req) {
-		dev_err(&dev->pdev->dev,
-				"allocate status_req memory failed\n");
-		retval = -ENOMEM;
-		goto error;
-	}
-	INIT_LIST_HEAD(&dev->status_req->queue);
-
-	/* allocate a small amount of memory to get valid address */
-	dev->status_req->req.buf = kmalloc(8, GFP_KERNEL);
-	dev->status_req->req.dma = virt_to_phys(dev->status_req->req.buf);
-
-	dev->resume_state = USB_STATE_NOTATTACHED;
-	dev->usb_state = USB_STATE_POWERED;
-	dev->ep0_dir = USB_DIR_OUT;
-
-	/* remote wakeup reset to 0 when the device is reset */
-	dev->remote_wakeup = 0;
-	dev->dev_status = 1 << USB_DEVICE_SELF_POWERED;
-
-	/* reset device controller */
-	langwell_udc_reset(dev);
-
-	/* initialize gadget structure */
-	dev->gadget.ops = &langwell_ops;	/* usb_gadget_ops */
-	dev->gadget.ep0 = &dev->ep[0].ep;	/* gadget ep0 */
-	INIT_LIST_HEAD(&dev->gadget.ep_list);	/* ep_list */
-	dev->gadget.speed = USB_SPEED_UNKNOWN;	/* speed */
-	dev->gadget.max_speed = USB_SPEED_HIGH;	/* support dual speed */
-
-	/* the "gadget" abstracts/virtualizes the controller */
-	dev_set_name(&dev->gadget.dev, "gadget");
-	dev->gadget.dev.parent = &pdev->dev;
-	dev->gadget.dev.dma_mask = pdev->dev.dma_mask;
-	dev->gadget.dev.release = gadget_release;
-	dev->gadget.name = driver_name;		/* gadget name */
-
-	/* controller endpoints reinit */
-	eps_reinit(dev);
-
-	/* reset ep0 dQH and endptctrl */
-	ep0_reset(dev);
-
-	/* create dTD dma_pool resource */
-	dev->dtd_pool = dma_pool_create("langwell_dtd",
-			&dev->pdev->dev,
-			sizeof(struct langwell_dtd),
-			DTD_ALIGNMENT,
-			DMA_BOUNDARY);
-
-	if (!dev->dtd_pool) {
-		retval = -ENOMEM;
-		goto error;
-	}
-
-	/* done */
-	dev_info(&dev->pdev->dev, "%s\n", driver_desc);
-	dev_info(&dev->pdev->dev, "irq %d, pci mem %p\n", pdev->irq, base);
-	dev_info(&dev->pdev->dev, "Driver version: " DRIVER_VERSION "\n");
-	dev_info(&dev->pdev->dev, "Support (max) %d endpoints\n", dev->ep_max);
-	dev_info(&dev->pdev->dev, "Device interface version: 0x%04x\n",
-			dev->dciversion);
-	dev_info(&dev->pdev->dev, "Controller mode: %s\n",
-			dev->devcap ? "Device" : "Host");
-	dev_info(&dev->pdev->dev, "Support USB LPM: %s\n",
-			dev->lpm ? "Yes" : "No");
-
-	dev_vdbg(&dev->pdev->dev,
-			"After langwell_udc_probe(), print all registers:\n");
-	print_all_registers(dev);
-
-	retval = device_register(&dev->gadget.dev);
-	if (retval)
-		goto error;
-
-	retval = usb_add_gadget_udc(&pdev->dev, &dev->gadget);
-	if (retval)
-		goto error;
-
-	retval = device_create_file(&pdev->dev, &dev_attr_langwell_udc);
-	if (retval)
-		goto error;
-
-	retval = device_create_file(&pdev->dev, &dev_attr_remote_wakeup);
-	if (retval)
-		goto error_attr1;
-
-	dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-	return 0;
-
-error_attr1:
-	device_remove_file(&pdev->dev, &dev_attr_langwell_udc);
-error:
-	if (dev) {
-		dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-		langwell_udc_remove(pdev);
-	}
-
-	return retval;
-}
-
-
-/* device controller suspend */
-static int langwell_udc_suspend(struct pci_dev *pdev, pm_message_t state)
-{
-	struct langwell_udc	*dev = pci_get_drvdata(pdev);
-
-	dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	usb_del_gadget_udc(&dev->gadget);
-	/* disable interrupt and set controller to stop state */
-	langwell_udc_stop(dev);
-
-	/* disable IRQ handler */
-	if (dev->got_irq)
-		free_irq(pdev->irq, dev);
-	dev->got_irq = 0;
-
-	/* save PCI state */
-	pci_save_state(pdev);
-
-	spin_lock_irq(&dev->lock);
-	/* stop all usb activities */
-	stop_activity(dev);
-	spin_unlock_irq(&dev->lock);
-
-	/* free dTD dma_pool and dQH */
-	if (dev->dtd_pool)
-		dma_pool_destroy(dev->dtd_pool);
-
-	if (dev->ep_dqh)
-		dma_free_coherent(&pdev->dev, dev->ep_dqh_size,
-			dev->ep_dqh, dev->ep_dqh_dma);
-
-	/* release SRAM caching */
-	if (dev->has_sram && dev->got_sram)
-		sram_deinit(dev);
-
-	/* set device power state */
-	pci_set_power_state(pdev, PCI_D3hot);
-
-	/* enter PHY low power suspend */
-	if (dev->pdev->device != 0x0829)
-		langwell_phy_low_power(dev, 1);
-
-	dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-	return 0;
-}
-
-
-/* device controller resume */
-static int langwell_udc_resume(struct pci_dev *pdev)
-{
-	struct langwell_udc	*dev = pci_get_drvdata(pdev);
-	size_t			size;
-
-	dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	/* exit PHY low power suspend */
-	if (dev->pdev->device != 0x0829)
-		langwell_phy_low_power(dev, 0);
-
-	/* set device D0 power state */
-	pci_set_power_state(pdev, PCI_D0);
-
-	/* enable SRAM caching if detected */
-	if (dev->has_sram && !dev->got_sram)
-		sram_init(dev);
-
-	/* allocate device dQH memory */
-	size = dev->ep_max * sizeof(struct langwell_dqh);
-	dev_vdbg(&dev->pdev->dev, "orig size = %zd\n", size);
-	if (size < DQH_ALIGNMENT)
-		size = DQH_ALIGNMENT;
-	else if ((size % DQH_ALIGNMENT) != 0) {
-		size += DQH_ALIGNMENT + 1;
-		size &= ~(DQH_ALIGNMENT - 1);
-	}
-	dev->ep_dqh = dma_alloc_coherent(&pdev->dev, size,
-					&dev->ep_dqh_dma, GFP_KERNEL);
-	if (!dev->ep_dqh) {
-		dev_err(&dev->pdev->dev, "allocate dQH memory failed\n");
-		return -ENOMEM;
-	}
-	dev->ep_dqh_size = size;
-	dev_vdbg(&dev->pdev->dev, "ep_dqh_size = %zd\n", dev->ep_dqh_size);
-
-	/* create dTD dma_pool resource */
-	dev->dtd_pool = dma_pool_create("langwell_dtd",
-			&dev->pdev->dev,
-			sizeof(struct langwell_dtd),
-			DTD_ALIGNMENT,
-			DMA_BOUNDARY);
-
-	if (!dev->dtd_pool)
-		return -ENOMEM;
-
-	/* restore PCI state */
-	pci_restore_state(pdev);
-
-	/* enable IRQ handler */
-	if (request_irq(pdev->irq, langwell_irq, IRQF_SHARED,
-				driver_name, dev) != 0) {
-		dev_err(&dev->pdev->dev, "request interrupt %d failed\n",
-				pdev->irq);
-		return -EBUSY;
-	}
-	dev->got_irq = 1;
-
-	/* reset and start controller to run state */
-	if (dev->stopped) {
-		/* reset device controller */
-		langwell_udc_reset(dev);
-
-		/* reset ep0 dQH and endptctrl */
-		ep0_reset(dev);
-
-		/* start device if gadget is loaded */
-		if (dev->driver)
-			langwell_udc_start(dev);
-	}
-
-	/* reset USB status */
-	dev->usb_state = USB_STATE_ATTACHED;
-	dev->ep0_state = WAIT_FOR_SETUP;
-	dev->ep0_dir = USB_DIR_OUT;
-
-	dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-	return 0;
-}
-
-
-/* pci driver shutdown */
-static void langwell_udc_shutdown(struct pci_dev *pdev)
-{
-	struct langwell_udc	*dev = pci_get_drvdata(pdev);
-	u32			usbmode;
-
-	dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	/* reset controller mode to IDLE */
-	usbmode = readl(&dev->op_regs->usbmode);
-	dev_dbg(&dev->pdev->dev, "usbmode = 0x%08x\n", usbmode);
-	usbmode &= (~3 | MODE_IDLE);
-	writel(usbmode, &dev->op_regs->usbmode);
-
-	dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-}
-
-/*-------------------------------------------------------------------------*/
-
-static const struct pci_device_id pci_ids[] = { {
-	.class =	((PCI_CLASS_SERIAL_USB << 8) | 0xfe),
-	.class_mask =	~0,
-	.vendor =	0x8086,
-	.device =	0x0811,
-	.subvendor =	PCI_ANY_ID,
-	.subdevice =	PCI_ANY_ID,
-}, { /* end: all zeroes */ }
-};
-
-MODULE_DEVICE_TABLE(pci, pci_ids);
-
-
-static struct pci_driver langwell_pci_driver = {
-	.name =		(char *) driver_name,
-	.id_table =	pci_ids,
-
-	.probe =	langwell_udc_probe,
-	.remove =	langwell_udc_remove,
-
-	/* device controller suspend/resume */
-	.suspend =	langwell_udc_suspend,
-	.resume =	langwell_udc_resume,
-
-	.shutdown =	langwell_udc_shutdown,
-};
-
-module_pci_driver(langwell_pci_driver);
-
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_AUTHOR("Xiaochen Shen <xiaochen.shen@xxxxxxxxx>");
-MODULE_VERSION(DRIVER_VERSION);
-MODULE_LICENSE("GPL");
diff --git a/drivers/usb/gadget/langwell_udc.h b/drivers/usb/gadget/langwell_udc.h
deleted file mode 100644
index 38fa3c8..0000000
--- a/drivers/usb/gadget/langwell_udc.h
+++ /dev/null
@@ -1,223 +0,0 @@
-/*
- * Intel Langwell USB Device Controller driver
- * Copyright (C) 2008-2009, Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- */
-
-#include <linux/usb/langwell_udc.h>
-
-/*-------------------------------------------------------------------------*/
-
-/* driver data structures and utilities */
-
-/*
- * dTD: Device Endpoint Transfer Descriptor
- * describe to the device controller the location and quantity of
- * data to be send/received for given transfer
- */
-struct langwell_dtd {
-	u32	dtd_next;
-/* bits 31:5, next transfer element pointer */
-#define	DTD_NEXT(d)	(((d)>>5)&0x7ffffff)
-#define	DTD_NEXT_MASK	(0x7ffffff << 5)
-/* terminate */
-#define	DTD_TERM	BIT(0)
-	/* bits 7:0, execution back states */
-	u32	dtd_status:8;
-#define	DTD_STATUS(d)	(((d)>>0)&0xff)
-#define	DTD_STS_ACTIVE	BIT(7)	/* active */
-#define	DTD_STS_HALTED	BIT(6)	/* halted */
-#define	DTD_STS_DBE	BIT(5)	/* data buffer error */
-#define	DTD_STS_TRE	BIT(3)	/* transaction error  */
-	/* bits 9:8 */
-	u32	dtd_res0:2;
-	/* bits 11:10, multipier override */
-	u32	dtd_multo:2;
-#define	DTD_MULTO	(BIT(11) | BIT(10))
-	/* bits 14:12 */
-	u32	dtd_res1:3;
-	/* bit 15, interrupt on complete */
-	u32	dtd_ioc:1;
-#define	DTD_IOC		BIT(15)
-	/* bits 30:16, total bytes */
-	u32	dtd_total:15;
-#define	DTD_TOTAL(d)	(((d)>>16)&0x7fff)
-#define	DTD_MAX_TRANSFER_LENGTH	0x4000
-	/* bit 31 */
-	u32	dtd_res2:1;
-	/* dTD buffer pointer page 0 to 4 */
-	u32	dtd_buf[5];
-#define	DTD_OFFSET_MASK	0xfff
-/* bits 31:12, buffer pointer */
-#define	DTD_BUFFER(d)	(((d)>>12)&0x3ff)
-/* bits 11:0, current offset */
-#define	DTD_C_OFFSET(d)	(((d)>>0)&0xfff)
-/* bits 10:0, frame number */
-#define	DTD_FRAME(d)	(((d)>>0)&0x7ff)
-
-	/* driver-private parts */
-
-	/* dtd dma address */
-	dma_addr_t		dtd_dma;
-	/* next dtd virtual address */
-	struct langwell_dtd	*next_dtd_virt;
-};
-
-
-/*
- * dQH: Device Endpoint Queue Head
- * describe where all transfers are managed
- * 48-byte data structure, aligned on 64-byte boundary
- *
- * These are associated with dTD structure
- */
-struct langwell_dqh {
-	/* endpoint capabilities and characteristics */
-	u32	dqh_res0:15;	/* bits 14:0 */
-	u32	dqh_ios:1;	/* bit 15, interrupt on setup */
-#define	DQH_IOS		BIT(15)
-	u32	dqh_mpl:11;	/* bits 26:16, maximum packet length */
-#define	DQH_MPL		(0x7ff << 16)
-	u32	dqh_res1:2;	/* bits 28:27 */
-	u32	dqh_zlt:1;	/* bit 29, zero length termination */
-#define	DQH_ZLT		BIT(29)
-	u32	dqh_mult:2;	/* bits 31:30 */
-#define	DQH_MULT	(BIT(30) | BIT(31))
-
-	/* current dTD pointer */
-	u32	dqh_current;	/* locate the transfer in progress */
-#define DQH_C_DTD(e)	\
-	(((e)>>5)&0x7ffffff)	/* bits 31:5, current dTD pointer */
-
-	/* transfer overlay, hardware parts of a struct langwell_dtd */
-	u32	dtd_next;
-	u32	dtd_status:8;	/* bits 7:0, execution back states */
-	u32	dtd_res0:2;	/* bits 9:8 */
-	u32	dtd_multo:2;	/* bits 11:10, multipier override */
-	u32	dtd_res1:3;	/* bits 14:12 */
-	u32	dtd_ioc:1;	/* bit 15, interrupt on complete */
-	u32	dtd_total:15;	/* bits 30:16, total bytes */
-	u32	dtd_res2:1;	/* bit 31 */
-	u32	dtd_buf[5];	/* dTD buffer pointer page 0 to 4 */
-
-	u32	dqh_res2;
-	struct usb_ctrlrequest	dqh_setup;	/* setup packet buffer */
-} __attribute__ ((aligned(64)));
-
-
-/* endpoint data structure */
-struct langwell_ep {
-	struct usb_ep		ep;
-	dma_addr_t		dma;
-	struct langwell_udc	*dev;
-	unsigned long		irqs;
-	struct list_head	queue;
-	struct langwell_dqh	*dqh;
-	char			name[14];
-	unsigned		stopped:1,
-				ep_type:2,
-				ep_num:8;
-};
-
-
-/* request data structure */
-struct langwell_request {
-	struct usb_request	req;
-	struct langwell_dtd	*dtd, *head, *tail;
-	struct langwell_ep	*ep;
-	dma_addr_t		dtd_dma;
-	struct list_head	queue;
-	unsigned		dtd_count;
-	unsigned		mapped:1;
-};
-
-
-/* ep0 transfer state */
-enum ep0_state {
-	WAIT_FOR_SETUP,
-	DATA_STATE_XMIT,
-	DATA_STATE_NEED_ZLP,
-	WAIT_FOR_OUT_STATUS,
-	DATA_STATE_RECV,
-};
-
-
-/* device suspend state */
-enum lpm_state {
-	LPM_L0,	/* on */
-	LPM_L1,	/* LPM L1 sleep */
-	LPM_L2,	/* suspend */
-	LPM_L3,	/* off */
-};
-
-
-/* device data structure */
-struct langwell_udc {
-	/* each pci device provides one gadget, several endpoints */
-	struct usb_gadget	gadget;
-	spinlock_t		lock;	/* device lock */
-	struct langwell_ep	*ep;
-	struct usb_gadget_driver	*driver;
-	struct usb_phy		*transceiver;
-	u8			dev_addr;
-	u32			usb_state;
-	u32			resume_state;
-	u32			bus_reset;
-	enum lpm_state		lpm_state;
-	enum ep0_state		ep0_state;
-	u32			ep0_dir;
-	u16			dciversion;
-	unsigned		ep_max;
-	unsigned		devcap:1,
-				enabled:1,
-				region:1,
-				got_irq:1,
-				powered:1,
-				remote_wakeup:1,
-				rate:1,
-				is_reset:1,
-				softconnected:1,
-				vbus_active:1,
-				suspended:1,
-				stopped:1,
-				lpm:1,		/* LPM capability */
-				has_sram:1,	/* SRAM caching */
-				got_sram:1;
-
-	/* pci state used to access those endpoints */
-	struct pci_dev		*pdev;
-
-	/* Langwell otg transceiver */
-	struct langwell_otg	*lotg;
-
-	/* control registers */
-	struct langwell_cap_regs	__iomem	*cap_regs;
-	struct langwell_op_regs		__iomem	*op_regs;
-
-	struct usb_ctrlrequest	local_setup_buff;
-	struct langwell_dqh	*ep_dqh;
-	size_t			ep_dqh_size;
-	dma_addr_t		ep_dqh_dma;
-
-	/* ep0 status request */
-	struct langwell_request	*status_req;
-
-	/* dma pool */
-	struct dma_pool		*dtd_pool;
-
-	/* make sure release() is done */
-	struct completion	*done;
-
-	/* for private SRAM caching */
-	unsigned int		sram_addr;
-	unsigned int		sram_size;
-
-	/* device status data for get_status request */
-	u16			dev_status;
-};
-
-#define gadget_to_langwell(g)	container_of((g), struct langwell_udc, gadget)
-
diff --git a/include/linux/usb/langwell_udc.h b/include/linux/usb/langwell_udc.h
deleted file mode 100644
index 2d2d1bb..0000000
--- a/include/linux/usb/langwell_udc.h
+++ /dev/null
@@ -1,310 +0,0 @@
-/*
- * Intel Langwell USB Device Controller driver
- * Copyright (C) 2008-2009, Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
- */
-
-#ifndef __LANGWELL_UDC_H
-#define __LANGWELL_UDC_H
-
-
-/* MACRO defines */
-#define	CAP_REG_OFFSET		0x0
-#define	OP_REG_OFFSET		0x28
-
-#define	DMA_ADDR_INVALID	(~(dma_addr_t)0)
-
-#define	DQH_ALIGNMENT		2048
-#define	DTD_ALIGNMENT		64
-#define	DMA_BOUNDARY		4096
-
-#define	EP0_MAX_PKT_SIZE	64
-#define EP_DIR_IN		1
-#define EP_DIR_OUT		0
-
-#define FLUSH_TIMEOUT		1000
-#define RESET_TIMEOUT		1000
-#define SETUPSTAT_TIMEOUT	100
-#define PRIME_TIMEOUT		100
-
-
-/* device memory space registers */
-
-/* Capability Registers, BAR0 + CAP_REG_OFFSET */
-struct langwell_cap_regs {
-	/* offset: 0x0 */
-	u8	caplength;	/* offset of Operational Register */
-	u8	_reserved3;
-	u16	hciversion;	/* H: BCD encoding of host version */
-	u32	hcsparams;	/* H: host port steering logic capability */
-	u32	hccparams;	/* H: host multiple mode control capability */
-#define	HCC_LEN	BIT(17)		/* Link power management (LPM) capability */
-	u8	_reserved4[0x20-0xc];
-	/* offset: 0x20 */
-	u16	dciversion;	/* BCD encoding of device version */
-	u8	_reserved5[0x24-0x22];
-	u32	dccparams;	/* overall device controller capability */
-#define	HOSTCAP	BIT(8)		/* host capable */
-#define	DEVCAP	BIT(7)		/* device capable */
-#define DEN(d)	\
-	(((d)>>0)&0x1f)		/* bits 4:0, device endpoint number */
-} __attribute__ ((packed));
-
-
-/* Operational Registers, BAR0 + OP_REG_OFFSET */
-struct langwell_op_regs {
-	/* offset: 0x28 */
-	u32	extsts;
-#define	EXTS_TI1	BIT(4)	/* general purpose timer interrupt 1 */
-#define	EXTS_TI1TI0	BIT(3)	/* general purpose timer interrupt 0 */
-#define	EXTS_TI1UPI	BIT(2)	/* USB host periodic interrupt */
-#define	EXTS_TI1UAI	BIT(1)	/* USB host asynchronous interrupt */
-#define	EXTS_TI1NAKI	BIT(0)	/* NAK interrupt */
-	u32	extintr;
-#define	EXTI_TIE1	BIT(4)	/* general purpose timer interrupt enable 1 */
-#define	EXTI_TIE0	BIT(3)	/* general purpose timer interrupt enable 0 */
-#define	EXTI_UPIE	BIT(2)	/* USB host periodic interrupt enable */
-#define	EXTI_UAIE	BIT(1)	/* USB host asynchronous interrupt enable */
-#define	EXTI_NAKE	BIT(0)	/* NAK interrupt enable */
-	/* offset: 0x30 */
-	u32	usbcmd;
-#define	CMD_HIRD(u)	\
-	(((u)>>24)&0xf)		/* bits 27:24, host init resume duration */
-#define	CMD_ITC(u)	\
-	(((u)>>16)&0xff)	/* bits 23:16, interrupt threshold control */
-#define	CMD_PPE		BIT(15)	/* per-port change events enable */
-#define	CMD_ATDTW	BIT(14)	/* add dTD tripwire */
-#define	CMD_SUTW	BIT(13)	/* setup tripwire */
-#define	CMD_ASPE	BIT(11) /* asynchronous schedule park mode enable */
-#define	CMD_FS2		BIT(10)	/* frame list size */
-#define	CMD_ASP1	BIT(9)	/* asynchronous schedule park mode count */
-#define	CMD_ASP0	BIT(8)
-#define	CMD_LR		BIT(7)	/* light host/device controller reset */
-#define	CMD_IAA		BIT(6)	/* interrupt on async advance doorbell */
-#define	CMD_ASE		BIT(5)	/* asynchronous schedule enable */
-#define	CMD_PSE		BIT(4)	/* periodic schedule enable */
-#define	CMD_FS1		BIT(3)
-#define	CMD_FS0		BIT(2)
-#define	CMD_RST		BIT(1)	/* controller reset */
-#define	CMD_RUNSTOP	BIT(0)	/* run/stop */
-	u32	usbsts;
-#define	STS_PPCI(u)	\
-	(((u)>>16)&0xffff)	/* bits 31:16, port-n change detect */
-#define	STS_AS		BIT(15)	/* asynchronous schedule status */
-#define	STS_PS		BIT(14)	/* periodic schedule status */
-#define	STS_RCL		BIT(13)	/* reclamation */
-#define	STS_HCH		BIT(12)	/* HC halted */
-#define	STS_ULPII	BIT(10)	/* ULPI interrupt */
-#define	STS_SLI		BIT(8)	/* DC suspend */
-#define	STS_SRI		BIT(7)	/* SOF received */
-#define	STS_URI		BIT(6)	/* USB reset received */
-#define	STS_AAI		BIT(5)	/* interrupt on async advance */
-#define	STS_SEI		BIT(4)	/* system error */
-#define	STS_FRI		BIT(3)	/* frame list rollover */
-#define	STS_PCI		BIT(2)	/* port change detect */
-#define	STS_UEI		BIT(1)	/* USB error interrupt */
-#define	STS_UI		BIT(0)	/* USB interrupt */
-	u32	usbintr;
-/* bits 31:16, per-port interrupt enable */
-#define	INTR_PPCE(u)	(((u)>>16)&0xffff)
-#define	INTR_ULPIE	BIT(10)	/* ULPI enable */
-#define	INTR_SLE	BIT(8)	/* DC sleep/suspend enable */
-#define	INTR_SRE	BIT(7)	/* SOF received enable */
-#define	INTR_URE	BIT(6)	/* USB reset enable */
-#define	INTR_AAE	BIT(5)	/* interrupt on async advance enable */
-#define	INTR_SEE	BIT(4)	/* system error enable */
-#define	INTR_FRE	BIT(3)	/* frame list rollover enable */
-#define	INTR_PCE	BIT(2)	/* port change detect enable */
-#define	INTR_UEE	BIT(1)	/* USB error interrupt enable */
-#define	INTR_UE		BIT(0)	/* USB interrupt enable */
-	u32	frindex;	/* frame index */
-#define	FRINDEX_MASK	(0x3fff << 0)
-	u32	ctrldssegment;	/* not used */
-	u32	deviceaddr;
-#define USBADR_SHIFT	25
-#define	USBADR(d)	\
-	(((d)>>25)&0x7f)	/* bits 31:25, device address */
-#define USBADR_MASK	(0x7f << 25)
-#define	USBADRA		BIT(24)	/* device address advance */
-	u32	endpointlistaddr;/* endpoint list top memory address */
-/* bits 31:11, endpoint list pointer */
-#define	EPBASE(d)	(((d)>>11)&0x1fffff)
-#define	ENDPOINTLISTADDR_MASK	(0x1fffff << 11)
-	u32	ttctrl;		/* H: TT operatin, not used */
-	/* offset: 0x50 */
-	u32	burstsize;	/* burst size of data movement */
-#define	TXPBURST(b)	\
-	(((b)>>8)&0xff)		/* bits 15:8, TX burst length */
-#define	RXPBURST(b)	\
-	(((b)>>0)&0xff)		/* bits 7:0, RX burst length */
-	u32	txfilltuning;	/* TX tuning */
-	u32	txttfilltuning;	/* H: TX TT tuning */
-	u32	ic_usb;		/* control the IC_USB FS/LS transceiver */
-	/* offset: 0x60 */
-	u32	ulpi_viewport;	/* indirect access to ULPI PHY */
-#define	ULPIWU		BIT(31)	/* ULPI wakeup */
-#define	ULPIRUN		BIT(30)	/* ULPI read/write run */
-#define	ULPIRW		BIT(29)	/* ULPI read/write control */
-#define	ULPISS		BIT(27)	/* ULPI sync state */
-#define	ULPIPORT(u)	\
-	(((u)>>24)&7)		/* bits 26:24, ULPI port number */
-#define	ULPIADDR(u)	\
-	(((u)>>16)&0xff)	/* bits 23:16, ULPI data address */
-#define	ULPIDATRD(u)	\
-	(((u)>>8)&0xff)		/* bits 15:8, ULPI data read */
-#define	ULPIDATWR(u)	\
-	(((u)>>0)&0xff)		/* bits 7:0, ULPI date write */
-	u8	_reserved6[0x70-0x64];
-	/* offset: 0x70 */
-	u32	configflag;	/* H: not used */
-	u32	portsc1;	/* port status */
-#define	DA(p)	\
-	(((p)>>25)&0x7f)	/* bits 31:25, device address */
-#define	PORTS_SSTS	(BIT(24) | BIT(23))	/* suspend status */
-#define	PORTS_WKOC	BIT(22)	/* wake on over-current enable */
-#define	PORTS_WKDS	BIT(21)	/* wake on disconnect enable */
-#define	PORTS_WKCN	BIT(20)	/* wake on connect enable */
-#define	PORTS_PTC(p)	(((p)>>16)&0xf)	/* bits 19:16, port test control */
-#define	PORTS_PIC	(BIT(15) | BIT(14))	/* port indicator control */
-#define	PORTS_PO	BIT(13)	/* port owner */
-#define	PORTS_PP	BIT(12)	/* port power */
-#define	PORTS_LS	(BIT(11) | BIT(10))	/* line status */
-#define	PORTS_SLP	BIT(9)	/* suspend using L1 */
-#define	PORTS_PR	BIT(8)	/* port reset */
-#define	PORTS_SUSP	BIT(7)	/* suspend */
-#define	PORTS_FPR	BIT(6)	/* force port resume */
-#define	PORTS_OCC	BIT(5)	/* over-current change */
-#define	PORTS_OCA	BIT(4)	/* over-current active */
-#define	PORTS_PEC	BIT(3)	/* port enable/disable change */
-#define	PORTS_PE	BIT(2)	/* port enable/disable */
-#define	PORTS_CSC	BIT(1)	/* connect status change */
-#define	PORTS_CCS	BIT(0)	/* current connect status */
-	u8	_reserved7[0xb4-0x78];
-	/* offset: 0xb4 */
-	u32	devlc;		/* control LPM and each USB port behavior */
-/* bits 31:29, parallel transceiver select */
-#define	LPM_PTS(d)	(((d)>>29)&7)
-#define	LPM_STS		BIT(28)	/* serial transceiver select */
-#define	LPM_PTW		BIT(27)	/* parallel transceiver width */
-#define	LPM_PSPD(d)	(((d)>>25)&3)	/* bits 26:25, port speed */
-#define LPM_PSPD_MASK	(BIT(26) | BIT(25))
-#define LPM_SPEED_FULL	0
-#define LPM_SPEED_LOW	1
-#define LPM_SPEED_HIGH	2
-#define	LPM_SRT		BIT(24)	/* shorten reset time */
-#define	LPM_PFSC	BIT(23)	/* port force full speed connect */
-#define	LPM_PHCD	BIT(22) /* PHY low power suspend clock disable */
-#define	LPM_STL		BIT(16)	/* STALL reply to LPM token */
-#define	LPM_BA(d)	\
-	(((d)>>1)&0x7ff)	/* bits 11:1, BmAttributes */
-#define	LPM_NYT_ACK	BIT(0)	/* NYET/ACK reply to LPM token */
-	u8	_reserved8[0xf4-0xb8];
-	/* offset: 0xf4 */
-	u32	otgsc;		/* On-The-Go status and control */
-#define	OTGSC_DPIE	BIT(30)	/* data pulse interrupt enable */
-#define	OTGSC_MSE	BIT(29)	/* 1 ms timer interrupt enable */
-#define	OTGSC_BSEIE	BIT(28)	/* B session end interrupt enable */
-#define	OTGSC_BSVIE	BIT(27)	/* B session valid interrupt enable */
-#define	OTGSC_ASVIE	BIT(26)	/* A session valid interrupt enable */
-#define	OTGSC_AVVIE	BIT(25)	/* A VBUS valid interrupt enable */
-#define	OTGSC_IDIE	BIT(24)	/* USB ID interrupt enable */
-#define	OTGSC_DPIS	BIT(22)	/* data pulse interrupt status */
-#define	OTGSC_MSS	BIT(21)	/* 1 ms timer interrupt status */
-#define	OTGSC_BSEIS	BIT(20)	/* B session end interrupt status */
-#define	OTGSC_BSVIS	BIT(19)	/* B session valid interrupt status */
-#define	OTGSC_ASVIS	BIT(18)	/* A session valid interrupt status */
-#define	OTGSC_AVVIS	BIT(17)	/* A VBUS valid interrupt status */
-#define	OTGSC_IDIS	BIT(16)	/* USB ID interrupt status */
-#define	OTGSC_DPS	BIT(14)	/* data bus pulsing status */
-#define	OTGSC_MST	BIT(13)	/* 1 ms timer toggle */
-#define	OTGSC_BSE	BIT(12)	/* B session end */
-#define	OTGSC_BSV	BIT(11)	/* B session valid */
-#define	OTGSC_ASV	BIT(10)	/* A session valid */
-#define	OTGSC_AVV	BIT(9)	/* A VBUS valid */
-#define	OTGSC_USBID	BIT(8)	/* USB ID */
-#define	OTGSC_HABA	BIT(7)	/* hw assist B-disconnect to A-connect */
-#define	OTGSC_HADP	BIT(6)	/* hw assist data pulse */
-#define	OTGSC_IDPU	BIT(5)	/* ID pullup */
-#define	OTGSC_DP	BIT(4)	/* data pulsing */
-#define	OTGSC_OT	BIT(3)	/* OTG termination */
-#define	OTGSC_HAAR	BIT(2)	/* hw assist auto reset */
-#define	OTGSC_VC	BIT(1)	/* VBUS charge */
-#define	OTGSC_VD	BIT(0)	/* VBUS discharge */
-	u32	usbmode;
-#define	MODE_VBPS	BIT(5)	/* R/W VBUS power select */
-#define	MODE_SDIS	BIT(4)	/* R/W stream disable mode */
-#define	MODE_SLOM	BIT(3)	/* R/W setup lockout mode */
-#define	MODE_ENSE	BIT(2)	/* endian select */
-#define	MODE_CM(u)	(((u)>>0)&3)	/* bits 1:0, controller mode */
-#define	MODE_IDLE	0
-#define	MODE_DEVICE	2
-#define	MODE_HOST	3
-	u8	_reserved9[0x100-0xfc];
-	/* offset: 0x100 */
-	u32	endptnak;
-#define	EPTN(e)		\
-	(((e)>>16)&0xffff)	/* bits 31:16, TX endpoint NAK */
-#define	EPRN(e)		\
-	(((e)>>0)&0xffff)	/* bits 15:0, RX endpoint NAK */
-	u32	endptnaken;
-#define	EPTNE(e)	\
-	(((e)>>16)&0xffff)	/* bits 31:16, TX endpoint NAK enable */
-#define	EPRNE(e)	\
-	(((e)>>0)&0xffff)	/* bits 15:0, RX endpoint NAK enable */
-	u32	endptsetupstat;
-#define	SETUPSTAT_MASK		(0xffff << 0)	/* bits 15:0 */
-#define EP0SETUPSTAT_MASK	1
-	u32	endptprime;
-/* bits 31:16, prime endpoint transmit buffer */
-#define	PETB(e)		(((e)>>16)&0xffff)
-/* bits 15:0, prime endpoint receive buffer */
-#define	PERB(e)		(((e)>>0)&0xffff)
-	/* offset: 0x110 */
-	u32	endptflush;
-/* bits 31:16, flush endpoint transmit buffer */
-#define	FETB(e)		(((e)>>16)&0xffff)
-/* bits 15:0, flush endpoint receive buffer */
-#define	FERB(e)		(((e)>>0)&0xffff)
-	u32	endptstat;
-/* bits 31:16, endpoint transmit buffer ready */
-#define	ETBR(e)		(((e)>>16)&0xffff)
-/* bits 15:0, endpoint receive buffer ready */
-#define	ERBR(e)		(((e)>>0)&0xffff)
-	u32	endptcomplete;
-/* bits 31:16, endpoint transmit complete event */
-#define	ETCE(e)		(((e)>>16)&0xffff)
-/* bits 15:0, endpoint receive complete event */
-#define	ERCE(e)		(((e)>>0)&0xffff)
-	/* offset: 0x11c */
-	u32	endptctrl[16];
-#define	EPCTRL_TXE	BIT(23)	/* TX endpoint enable */
-#define	EPCTRL_TXR	BIT(22)	/* TX data toggle reset */
-#define	EPCTRL_TXI	BIT(21)	/* TX data toggle inhibit */
-#define	EPCTRL_TXT(e)	(((e)>>18)&3)	/* bits 19:18, TX endpoint type */
-#define	EPCTRL_TXT_SHIFT	18
-#define	EPCTRL_TXD	BIT(17)	/* TX endpoint data source */
-#define	EPCTRL_TXS	BIT(16)	/* TX endpoint STALL */
-#define	EPCTRL_RXE	BIT(7)	/* RX endpoint enable */
-#define	EPCTRL_RXR	BIT(6)	/* RX data toggle reset */
-#define	EPCTRL_RXI	BIT(5)	/* RX data toggle inhibit */
-#define	EPCTRL_RXT(e)	(((e)>>2)&3)	/* bits 3:2, RX endpoint type */
-#define	EPCTRL_RXT_SHIFT	2	/* bits 19:18, TX endpoint type */
-#define	EPCTRL_RXD	BIT(1)	/* RX endpoint data sink */
-#define	EPCTRL_RXS	BIT(0)	/* RX endpoint STALL */
-} __attribute__ ((packed));
-
-#endif /* __LANGWELL_UDC_H */
-
-- 
1.7.10

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux