There is an U2O OTG controller on ttc dkb, this patch is going to enable
it.
At this moment, it can only works in device mode, because when works in
host mode, it needs to supply vbus, but we have no vbus driver added
at this moment. Once the vbus driver is added, I'll prepar another
patch to enable the switch function.
Signed-off-by: Neil Zhang <zhangwm@xxxxxxxxxxx>
---
arch/arm/mach-mmp/ttc_dkb.c | 37 +++++++++++++++++++++++++++++++++++++
1 files changed, 37 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-mmp/ttc_dkb.c b/arch/arm/mach-mmp/ttc_dkb.c
index 3fc9ed2..2662153 100644
--- a/arch/arm/mach-mmp/ttc_dkb.c
+++ b/arch/arm/mach-mmp/ttc_dkb.c
@@ -17,6 +17,7 @@
#include <linux/interrupt.h>
#include <linux/i2c/pca953x.h>
#include <linux/gpio.h>
+#include <linux/platform_data/mv_usb.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -25,6 +26,7 @@
#include <mach/mfp-pxa910.h>
#include <mach/pxa910.h>
#include <mach/irqs.h>
+#include <mach/regs-usb.h>
#include "common.h"
@@ -144,6 +146,26 @@ static struct i2c_board_info ttc_dkb_i2c_info[] = {
},
};
+#ifdef CONFIG_USB_SUPPORT
+#if defined(CONFIG_USB_MV_UDC) || defined(CONFIG_USB_EHCI_MV_U2O)
+
+static char *pxa910_usb_clock_name[] = {
+ [0] = "U2OCLK",
+};
+
+static struct mv_usb_platform_data ttc_usb_pdata = {
+ .clknum = 1,
+ .clkname = pxa910_usb_clock_name,
+ .vbus = NULL,
+ .mode = MV_USB_MODE_OTG,
+ .otg_force_a_bus_req = 1,
+ .phy_init = pxa_usb_phy_init,
+ .phy_deinit = pxa_usb_phy_deinit,
+ .set_vbus = NULL,
+};
+#endif
+#endif
+
static void __init ttc_dkb_init(void)
{
mfp_config(ARRAY_AND_SIZE(ttc_dkb_pin_config));
@@ -154,6 +176,21 @@ static void __init ttc_dkb_init(void)
/* off-chip devices */
pxa910_add_twsi(0, NULL, ARRAY_AND_SIZE(ttc_dkb_i2c_info));
platform_add_devices(ARRAY_AND_SIZE(ttc_dkb_devices));
+
+#ifdef CONFIG_USB_MV_UDC
+ pxa168_device_u2o.dev.platform_data = &ttc_usb_pdata;
+ platform_device_register(&pxa168_device_u2o);
+#endif
+
+#ifdef CONFIG_USB_EHCI_MV_U2O
+ pxa168_device_u2oehci.dev.platform_data = &ttc_usb_pdata;
+ platform_device_register(&pxa168_device_u2oehci);
+#endif
+
+#ifdef CONFIG_USB_MV_OTG
+ pxa168_device_u2ootg.dev.platform_data = &ttc_usb_pdata;
+ platform_device_register(&pxa168_device_u2ootg);
+#endif
}
MACHINE_START(TTC_DKB, "PXA910-based TTC_DKB Development Platform")
--
1.7.4.1
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
