The ehci-mv can support PXA168, PXA910 and PXA920, use this driver to
support pxa168 SPH usb.
Signed-off-by: Neil Zhang <zhangwm@xxxxxxxxxxx>
---
arch/arm/mach-mmp/devices.c | 2 +-
arch/arm/mach-mmp/include/mach/pxa168.h | 7 ++-----
arch/arm/mach-mmp/pxa168.c | 20 +++++++++++---------
3 files changed, 14 insertions(+), 15 deletions(-)
diff --git a/arch/arm/mach-mmp/devices.c b/arch/arm/mach-mmp/devices.c
index 2887f2d..0d5e601 100644
--- a/arch/arm/mach-mmp/devices.c
+++ b/arch/arm/mach-mmp/devices.c
@@ -111,7 +111,7 @@ void u2o_write(void __iomem *base, unsigned int offset, unsigned int value)
#if defined(CONFIG_USB_MV_UDC) || defined(CONFIG_USB_EHCI_MV)
-#if defined(CONFIG_CPU_PXA910)
+#if defined(CONFIG_CPU_PXA910) || defined(CONFIG_CPU_PXA168)
static DEFINE_SPINLOCK(phy_lock);
static int phy_init_cnt;
diff --git a/arch/arm/mach-mmp/include/mach/pxa168.h b/arch/arm/mach-mmp/include/mach/pxa168.h
index dc03d58..ac6e00f 100644
--- a/arch/arm/mach-mmp/include/mach/pxa168.h
+++ b/arch/arm/mach-mmp/include/mach/pxa168.h
@@ -16,6 +16,7 @@ extern void pxa168_clear_keypad_wakeup(void);
#include <plat/pxa27x_keypad.h>
#include <mach/cputype.h>
#include <linux/pxa168_eth.h>
+#include <linux/platform_data/mv_usb.h>
extern struct pxa_device_desc pxa168_device_uart1;
extern struct pxa_device_desc pxa168_device_uart2;
@@ -36,12 +37,8 @@ extern struct pxa_device_desc pxa168_device_fb;
extern struct pxa_device_desc pxa168_device_keypad;
extern struct pxa_device_desc pxa168_device_eth;
-struct pxa168_usb_pdata {
- /* If NULL, default phy init routine for PXA168 would be called */
- int (*phy_init)(void __iomem *usb_phy_reg_base);
-};
/* pdata can be NULL */
-int __init pxa168_add_usb_host(struct pxa168_usb_pdata *pdata);
+extern int __init pxa168_add_usb_host(struct mv_usb_platform_data *pdata);
extern struct platform_device pxa168_device_gpio;
diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c
index b24d2c3..62d787c 100644
--- a/arch/arm/mach-mmp/pxa168.c
+++ b/arch/arm/mach-mmp/pxa168.c
@@ -14,6 +14,7 @@
#include <linux/io.h>
#include <linux/clk.h>
#include <linux/platform_device.h>
+#include <linux/platform_data/mv_usb.h>
#include <asm/mach/time.h>
#include <asm/system_misc.h>
@@ -27,6 +28,7 @@
#include <mach/mfp.h>
#include <linux/dma-mapping.h>
#include <mach/pxa168.h>
+#include <mach/regs-usb.h>
#include "common.h"
#include "clock.h"
@@ -93,7 +95,7 @@ static struct clk_lookup pxa168_clkregs[] = {
INIT_CLKREG(&clk_gpio, "pxa-gpio", NULL),
INIT_CLKREG(&clk_keypad, "pxa27x-keypad", NULL),
INIT_CLKREG(&clk_eth, "pxa168-eth", "MFUCLK"),
- INIT_CLKREG(&clk_usb, "pxa168-ehci", "PXA168-USBCLK"),
+ INIT_CLKREG(&clk_usb, NULL, "PXA168-USBCLK"),
INIT_CLKREG(&clk_rtc, "sa1100-rtc", NULL),
};
@@ -184,17 +186,17 @@ struct platform_device pxa168_device_gpio = {
struct resource pxa168_usb_host_resources[] = {
/* USB Host conroller register base */
[0] = {
- .start = 0xd4209000,
- .end = 0xd4209000 + 0x200,
+ .start = PXA168_U2H_REGBASE + U2x_CAPREGS_OFFSET,
+ .end = PXA168_U2H_REGBASE + USB_REG_RANGE,
.flags = IORESOURCE_MEM,
- .name = "pxa168-usb-host",
+ .name = "capregs",
},
/* USB PHY register base */
[1] = {
- .start = 0xd4206000,
- .end = 0xd4206000 + 0xff,
+ .start = PXA168_U2H_PHYBASE,
+ .end = PXA168_U2H_PHYBASE + USB_PHY_RANGE,
.flags = IORESOURCE_MEM,
- .name = "pxa168-usb-phy",
+ .name = "phyregs",
},
[2] = {
.start = IRQ_PXA168_USB2,
@@ -205,7 +207,7 @@ struct resource pxa168_usb_host_resources[] = {
static u64 pxa168_usb_host_dmamask = DMA_BIT_MASK(32);
struct platform_device pxa168_device_usb_host = {
- .name = "pxa168-ehci",
+ .name = "pxa-sph",
.id = -1,
.dev = {
.dma_mask = &pxa168_usb_host_dmamask,
@@ -216,7 +218,7 @@ struct platform_device pxa168_device_usb_host = {
.resource = pxa168_usb_host_resources,
};
-int __init pxa168_add_usb_host(struct pxa168_usb_pdata *pdata)
+int __init pxa168_add_usb_host(struct mv_usb_platform_data *pdata)
{
pxa168_device_usb_host.dev.platform_data = pdata;
return platform_device_register(&pxa168_device_usb_host);
--
1.7.4.1
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
