> -----Original Message----- > From: Stuart Foster [mailto:smf.linux@xxxxxxxxxxxx] > Sent: Thursday, March 01, 2012 12:12 AM > To: Xu, Andiry > Cc: linux-usb@xxxxxxxxxxxxxxx > Subject: Re: xHCI host not responding to stop endpoint command > > On 02/29/12 02:24, Andiry Xu wrote: > > On 02/28/2012 06:14 PM, Stuart Foster wrote: > >> > >>> Do you have other USB3 devices to test? Do all the USB devices show the > >>> same symptom when connected to USB3.0 ports? > >>> > >>> Also, please try BIOS version 0813 and 0902. > >>> > >>> Thanks, > >>> Andiry > >>> > >>> -- > >>> To unsubscribe from this list: send the line "unsubscribe linux-usb" in > >>> the body of a message to majordomo@... > >>> More majordomo info at http://vger.kernel.org/majordomo-info.html > >>> > >>> > >> > >> Andiry, > >> > >> I have tried all the BIOS versions suggested with no luck. I have looked > at > >> all my USB devices and I have currently only the one USB3 device. > >> I do have a USB3 card in another machine (a Windows XP machine). The > USB3 > >> drive works correctly when used on this interface in this machine. > >> > > > > Thanks for the test. Do your USB1.1/2.0 devices work OK on USB3 ports of > > M5A97 platform? > > > > Can you plug your USB3 card on M5A97 and try with USB3 drive? If it > > works fine, I suspect it's controller HW issue. > > > > Thanks, > > Andiry > > > > > > > Andiry, > > Herewith the results for the extra USB3 Pci-e card. > In all cases the drive could be mounted and data transfered. > Again dmesg output filtered by "xhci_hcd": > The dmesg is still normal. I suspect it's controller HW issue on M5A97. There is similar issue on M5A97 and fixed by BIOS upgrade. I don't know why it's not useful for your case. Thanks, Andiry > USB3 drive for kernel 3.2.8: > xhci_hcd 0000:04:00.0: PCI INT A -> GSI 50 (level, low) -> IRQ 50 > xhci_hcd 0000:04:00.0: setting latency timer to 64 > xhci_hcd 0000:04:00.0: xHCI Host Controller > xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 5 > xhci_hcd 0000:04:00.0: irq 50, io mem 0xfe800000 > xhci_hcd 0000:04:00.0: irq 74 for MSI/MSI-X > xhci_hcd 0000:04:00.0: irq 75 for MSI/MSI-X > xhci_hcd 0000:04:00.0: irq 76 for MSI/MSI-X > xhci_hcd 0000:04:00.0: irq 77 for MSI/MSI-X > xhci_hcd 0000:04:00.0: irq 78 for MSI/MSI-X > xhci_hcd 0000:04:00.0: irq 79 for MSI/MSI-X > xhci_hcd 0000:04:00.0: irq 80 for MSI/MSI-X > usb usb5: Manufacturer: Linux 3.2.8 xhci_hcd > xhci_hcd 0000:04:00.0: xHCI Host Controller > xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 6 > usb usb6: Manufacturer: Linux 3.2.8 xhci_hcd > xhci_hcd 0000:07:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > xhci_hcd 0000:07:00.0: setting latency timer to 64 > xhci_hcd 0000:07:00.0: xHCI Host Controller > xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 7 > xhci_hcd 0000:07:00.0: irq 16, io mem 0xfe500000 > xhci_hcd 0000:07:00.0: irq 81 for MSI/MSI-X > xhci_hcd 0000:07:00.0: irq 82 for MSI/MSI-X > xhci_hcd 0000:07:00.0: irq 83 for MSI/MSI-X > xhci_hcd 0000:07:00.0: irq 84 for MSI/MSI-X > xhci_hcd 0000:07:00.0: irq 85 for MSI/MSI-X > xhci_hcd 0000:07:00.0: irq 86 for MSI/MSI-X > xhci_hcd 0000:07:00.0: irq 87 for MSI/MSI-X > usb usb7: Manufacturer: Linux 3.2.8 xhci_hcd > xhci_hcd 0000:07:00.0: xHCI Host Controller > xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 10 > usb usb10: Manufacturer: Linux 3.2.8 xhci_hcd > usb 10-2: new SuperSpeed USB device number 2 using xhci_hcd > xhci_hcd 0000:07:00.0: WARN: short transfer on control ep > xhci_hcd 0000:07:00.0: WARN: short transfer on control ep > xhci_hcd 0000:07:00.0: WARN: short transfer on control ep > xhci_hcd 0000:07:00.0: WARN: short transfer on control ep > > USB3 drive for kernel 3.3.0-rc5: > xhci_hcd 0000:04:00.0: xHCI Host Controller > xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 5 > xhci_hcd 0000:04:00.0: irq 50, io mem 0xfe800000 > xhci_hcd 0000:04:00.0: irq 74 for MSI/MSI-X > xhci_hcd 0000:04:00.0: irq 75 for MSI/MSI-X > xhci_hcd 0000:04:00.0: irq 76 for MSI/MSI-X > xhci_hcd 0000:04:00.0: irq 77 for MSI/MSI-X > xhci_hcd 0000:04:00.0: irq 78 for MSI/MSI-X > xhci_hcd 0000:04:00.0: irq 79 for MSI/MSI-X > xhci_hcd 0000:04:00.0: irq 80 for MSI/MSI-X > usb usb5: Manufacturer: Linux 3.3.0-rc5 xhci_hcd > xhci_hcd 0000:04:00.0: xHCI Host Controller > xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 6 > usb usb6: Manufacturer: Linux 3.3.0-rc5 xhci_hcd > xhci_hcd 0000:07:00.0: xHCI Host Controller > xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 7 > xhci_hcd 0000:07:00.0: irq 16, io mem 0xfe500000 > xhci_hcd 0000:07:00.0: irq 81 for MSI/MSI-X > xhci_hcd 0000:07:00.0: irq 82 for MSI/MSI-X > xhci_hcd 0000:07:00.0: irq 83 for MSI/MSI-X > xhci_hcd 0000:07:00.0: irq 84 for MSI/MSI-X > xhci_hcd 0000:07:00.0: irq 85 for MSI/MSI-X > xhci_hcd 0000:07:00.0: irq 86 for MSI/MSI-X > xhci_hcd 0000:07:00.0: irq 87 for MSI/MSI-X > usb usb7: Manufacturer: Linux 3.3.0-rc5 xhci_hcd > xhci_hcd 0000:07:00.0: xHCI Host Controller > xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 8 > usb usb8: Manufacturer: Linux 3.3.0-rc5 xhci_hcd > usb 8-2: new SuperSpeed USB device number 6 using xhci_hcd > > USB2 drive for kernel 3.2.8: > xhci_hcd 0000:04:00.0: PCI INT A -> GSI 50 (level, low) -> IRQ 50 > xhci_hcd 0000:04:00.0: setting latency timer to 64 > xhci_hcd 0000:04:00.0: xHCI Host Controller > xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4 > xhci_hcd 0000:04:00.0: irq 50, io mem 0xfe800000 > xhci_hcd 0000:04:00.0: irq 74 for MSI/MSI-X > xhci_hcd 0000:04:00.0: irq 75 for MSI/MSI-X > xhci_hcd 0000:04:00.0: irq 76 for MSI/MSI-X > xhci_hcd 0000:04:00.0: irq 77 for MSI/MSI-X > xhci_hcd 0000:04:00.0: irq 78 for MSI/MSI-X > xhci_hcd 0000:04:00.0: irq 79 for MSI/MSI-X > xhci_hcd 0000:04:00.0: irq 80 for MSI/MSI-X > usb usb4: Manufacturer: Linux 3.2.8 xhci_hcd > xhci_hcd 0000:04:00.0: xHCI Host Controller > xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 6 > usb usb6: Manufacturer: Linux 3.2.8 xhci_hcd > xhci_hcd 0000:07:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > xhci_hcd 0000:07:00.0: setting latency timer to 64 > xhci_hcd 0000:07:00.0: xHCI Host Controller > xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 7 > xhci_hcd 0000:07:00.0: irq 16, io mem 0xfe500000 > xhci_hcd 0000:07:00.0: irq 81 for MSI/MSI-X > xhci_hcd 0000:07:00.0: irq 82 for MSI/MSI-X > xhci_hcd 0000:07:00.0: irq 83 for MSI/MSI-X > xhci_hcd 0000:07:00.0: irq 84 for MSI/MSI-X > xhci_hcd 0000:07:00.0: irq 85 for MSI/MSI-X > xhci_hcd 0000:07:00.0: irq 86 for MSI/MSI-X > xhci_hcd 0000:07:00.0: irq 87 for MSI/MSI-X > usb usb7: Manufacturer: Linux 3.2.8 xhci_hcd > xhci_hcd 0000:07:00.0: xHCI Host Controller > xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 8 > usb usb8: Manufacturer: Linux 3.2.8 xhci_hcd > usb 7-2: new high-speed USB device number 2 using xhci_hcd > xhci_hcd 0000:07:00.0: WARN: short transfer on control ep > xhci_hcd 0000:07:00.0: WARN: short transfer on control ep > xhci_hcd 0000:07:00.0: WARN: short transfer on control ep > xhci_hcd 0000:07:00.0: WARN: short transfer on control ep > xhci_hcd 0000:07:00.0: WARN: short transfer on control ep > xhci_hcd 0000:07:00.0: WARN: short transfer on control ep > xhci_hcd 0000:07:00.0: WARN: Stalled endpoint > xhci_hcd 0000:07:00.0: WARN: Stalled endpoint > xhci_hcd 0000:07:00.0: WARN: Stalled endpoint > xhci_hcd 0000:07:00.0: WARN: Stalled endpoint > xhci_hcd 0000:07:00.0: WARN: Stalled endpoint > xhci_hcd 0000:07:00.0: WARN: Stalled endpoint > xhci_hcd 0000:07:00.0: WARN: Stalled endpoint > xhci_hcd 0000:07:00.0: WARN: Stalled endpoint > > USB2 drive for kernel 3.3.0-rc5: > xhci_hcd 0000:04:00.0: xHCI Host Controller > xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 5 > xhci_hcd 0000:04:00.0: irq 50, io mem 0xfe800000 > xhci_hcd 0000:04:00.0: irq 74 for MSI/MSI-X > xhci_hcd 0000:04:00.0: irq 75 for MSI/MSI-X > xhci_hcd 0000:04:00.0: irq 76 for MSI/MSI-X > xhci_hcd 0000:04:00.0: irq 77 for MSI/MSI-X > xhci_hcd 0000:04:00.0: irq 78 for MSI/MSI-X > xhci_hcd 0000:04:00.0: irq 79 for MSI/MSI-X > xhci_hcd 0000:04:00.0: irq 80 for MSI/MSI-X > usb usb5: Manufacturer: Linux 3.3.0-rc5 xhci_hcd > xhci_hcd 0000:04:00.0: xHCI Host Controller > xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 6 > usb usb6: Manufacturer: Linux 3.3.0-rc5 xhci_hcd > xhci_hcd 0000:07:00.0: xHCI Host Controller > xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 7 > xhci_hcd 0000:07:00.0: irq 16, io mem 0xfe500000 > xhci_hcd 0000:07:00.0: irq 81 for MSI/MSI-X > xhci_hcd 0000:07:00.0: irq 82 for MSI/MSI-X > xhci_hcd 0000:07:00.0: irq 83 for MSI/MSI-X > xhci_hcd 0000:07:00.0: irq 84 for MSI/MSI-X > xhci_hcd 0000:07:00.0: irq 85 for MSI/MSI-X > xhci_hcd 0000:07:00.0: irq 86 for MSI/MSI-X > xhci_hcd 0000:07:00.0: irq 87 for MSI/MSI-X > usb usb7: Manufacturer: Linux 3.3.0-rc5 xhci_hcd > xhci_hcd 0000:07:00.0: xHCI Host Controller > xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 8 > usb usb8: Manufacturer: Linux 3.3.0-rc5 xhci_hcd > usb 7-2: new high-speed USB device number 2 using xhci_hcd > > regards > > Stuart -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
