Remove superfluous newlines from debug statements. Remove unnecessary line breaks. Signed-off-by: Johan Hovold <jhovold@xxxxxxxxx> --- drivers/usb/serial/cp210x.c | 16 +++++++--------- 1 files changed, 7 insertions(+), 9 deletions(-) diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index fba1147..50689c2 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -279,7 +279,7 @@ static int cp210x_get_config(struct usb_serial_port *port, u8 request, if (result != size) { dbg("%s - Unable to send config request, " - "request=0x%x size=%d result=%d\n", + "request=0x%x size=%d result=%d", __func__, request, size, result); if (result > 0) result = -EPROTO; @@ -333,7 +333,7 @@ static int cp210x_set_config(struct usb_serial_port *port, u8 request, if ((size > 2 && result != size) || result < 0) { dbg("%s - Unable to send request, " - "request=0x%x size=%d result=%d\n", + "request=0x%x size=%d result=%d", __func__, request, size, result); if (result > 0) result = -EPROTO; @@ -597,8 +597,7 @@ static void cp210x_set_termios(struct tty_struct *tty, /* If the baud rate is to be updated*/ if (baud != tty_termios_baud_rate(old_termios) && baud != 0) { - dbg("%s - Setting baud rate to %d baud", __func__, - baud); + dbg("%s - Setting baud rate to %d baud", __func__, baud); if (cp210x_set_config_single(port, CP210X_SET_BAUDDIV, ((BAUD_RATE_GEN_FREQ + baud/2) / baud))) { dbg("Baud rate requested not supported by device"); @@ -636,13 +635,13 @@ static void cp210x_set_termios(struct tty_struct *tty, default: dbg("cp210x driver does not " "support the number of bits requested," - " using 8 bit mode\n"); + " using 8 bit mode"); bits |= BITS_DATA_8; break; } if (cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2)) dbg("Number of data bits requested " - "not supported by device\n"); + "not supported by device"); } if ((cflag & (PARENB|PARODD|CMSPAR)) != @@ -669,8 +668,7 @@ static void cp210x_set_termios(struct tty_struct *tty, } } if (cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2)) - dbg("Parity mode not supported " - "by device\n"); + dbg("Parity mode not supported by device"); } if ((cflag & CSTOPB) != (old_cflag & CSTOPB)) { @@ -685,7 +683,7 @@ static void cp210x_set_termios(struct tty_struct *tty, } if (cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2)) dbg("Number of stop bits requested " - "not supported by device\n"); + "not supported by device"); } if ((cflag & CRTSCTS) != (old_cflag & CRTSCTS)) { -- 1.7.8 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html