On Thu, 8 Dec 2011, Geoff Levand wrote: > Hi Alan, > > On Tue, 2011-11-15 at 11:57 -0500, Alan Stern wrote: > > On Tue, 15 Nov 2011, Geoff Levand wrote: > > > > > PS3 EHCI HC errata fix 244. The SCC EHCI HC will not correctly perform QH > > > reads that occur near or span a micro-frame boundry. This is due to a problem > > > in the Nak Count Reload Control logic (EHCI Specification 1.0 Section 4.9.1). > > > > > > The work-around for this problem is for the HC driver to set I=1 (inactive) for > > > QHs with H=1 (list head). > > > > > > Signed-off-by: Geoff Levand <geoff@xxxxxxxxxxxxx> > > > --- > > > drivers/usb/host/ehci-hcd.c | 1 + > > > 1 files changed, 1 insertions(+), 0 deletions(-) > > > > > > diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c > > > index e43cb5a..4ff0b7e 100644 > > > --- a/drivers/usb/host/ehci-hcd.c > > > +++ b/drivers/usb/host/ehci-hcd.c > > > @@ -621,6 +621,7 @@ static int ehci_init(struct usb_hcd *hcd) > > > hw->hw_next = QH_NEXT(ehci, ehci->async->qh_dma); > > > hw->hw_info1 = cpu_to_hc32(ehci, QH_HEAD); > > > hw->hw_info1 |= cpu_to_hc32(ehci, (2 << 28)); /* RL = 2 */ > > > + hw->hw_info1 |= cpu_to_hc32(ehci, (1 << 7)); /* I = 1 */ > > > hw->hw_token = cpu_to_hc32(ehci, QTD_STS_HALT); > > > hw->hw_qtd_next = EHCI_LIST_END(ehci); > > > ehci->async->qh_state = QH_STATE_LINKED; > > > > This should be okay, although the RL stuff isn't needed. Have you > > tested it on desktop PCs? > > I finally got a PC with EHCI setup for testing. So far it seems to be > working OK. Are there any specific tests you would like tried? Nothing special. I just wanted to make sure it wouldn't crash the whole controller. If you can use it okay with a flash drive, that's good enough. Alan Stern -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
