Hi, On Mon, Oct 10, 2011 at 09:54:56PM -0700, Kuninori Morimoto wrote: > Hi Felipe, Greg, and USB ML > > These are renesas_usbhs mod_host prototype support > > Kuninori Morimoto (27): > usb: renesas_usbhs: add suspend/resume support > usb: renesas_usbhs: move USBHSF_PKT_xxx to pipe.c > usb: renesas_usbhs: remove desc from usbhs_pipe_malloc > usb: renesas_usbhs: each pipe hold maxpacket size > usb: renesas_usbhs: struct usbhs_pipe hold handler > usb: renesas_usbhs: tidyup INTENB0 method > usb: renesas_usbhs: change usbhsc_bus_ctrl() to usbsc_set_buswait() > usb: renesas_usbhs: add bus control functions > usb: renesas_usbhs: add usbhs_bus_get_speed() > usb: renesas_usbhs: move usbhsp_type() to usbhs_pipe_type() > usb: renesas_usbhs: move usbhs_usbreq_get/set_val() to common.c > usb: renesas_usbhs: remove unneeded parameter from usbhs_mod_is_host() > usb: renesas_usbhs: add usbhs_dcp_dir_for_host() > usb: renesas_usbhs: add struct usbhs_priv to packet done function > usb: renesas_usbhs: add device select support in usbhs_pipe_config_update() > usb: renesas_usbhs: add usbhs_pipe_name() > usb: renesas_usbhs: move done callback to struct usbhs_pkt > usb: renesas_usbhs: disable auto paket start on usbhs_pkt_push() > usb: renesas_usbhs: modify pipe sequence settings > usb: renesas_usbhs: disable pipe on top of interrupt > usb: renesas_usbhs: support otg pin control > usb: renesas_usbhs: make sure SOF packet sending-out control > usb: renesas_usbhs: add usbhs_set_device_speed() support for host > usb: renesas_usbhs: add INTSTS1 interrupt support > usb: renesas_usbhs: add data/status stage handler > usb: renesas_usbhs: usbhs_dcp_control_transfer_done() cares mod_host > usb: renesas_usbhs: add mod_host support > > This prototype mod_host still doesn't support USB-Hub, and USB-DMAC. > I tested it on mackerel board. > mod_gadget still works well. I have applied this series. Thanks -- balbi
Attachment:
signature.asc
Description: Digital signature
