Hi Felipe, Greg, and USB ML
These are renesas_usbhs mod_host prototype support
Kuninori Morimoto (27):
usb: renesas_usbhs: add suspend/resume support
usb: renesas_usbhs: move USBHSF_PKT_xxx to pipe.c
usb: renesas_usbhs: remove desc from usbhs_pipe_malloc
usb: renesas_usbhs: each pipe hold maxpacket size
usb: renesas_usbhs: struct usbhs_pipe hold handler
usb: renesas_usbhs: tidyup INTENB0 method
usb: renesas_usbhs: change usbhsc_bus_ctrl() to usbsc_set_buswait()
usb: renesas_usbhs: add bus control functions
usb: renesas_usbhs: add usbhs_bus_get_speed()
usb: renesas_usbhs: move usbhsp_type() to usbhs_pipe_type()
usb: renesas_usbhs: move usbhs_usbreq_get/set_val() to common.c
usb: renesas_usbhs: remove unneeded parameter from usbhs_mod_is_host()
usb: renesas_usbhs: add usbhs_dcp_dir_for_host()
usb: renesas_usbhs: add struct usbhs_priv to packet done function
usb: renesas_usbhs: add device select support in usbhs_pipe_config_update()
usb: renesas_usbhs: add usbhs_pipe_name()
usb: renesas_usbhs: move done callback to struct usbhs_pkt
usb: renesas_usbhs: disable auto paket start on usbhs_pkt_push()
usb: renesas_usbhs: modify pipe sequence settings
usb: renesas_usbhs: disable pipe on top of interrupt
usb: renesas_usbhs: support otg pin control
usb: renesas_usbhs: make sure SOF packet sending-out control
usb: renesas_usbhs: add usbhs_set_device_speed() support for host
usb: renesas_usbhs: add INTSTS1 interrupt support
usb: renesas_usbhs: add data/status stage handler
usb: renesas_usbhs: usbhs_dcp_control_transfer_done() cares mod_host
usb: renesas_usbhs: add mod_host support
This prototype mod_host still doesn't support USB-Hub, and USB-DMAC.
I tested it on mackerel board.
mod_gadget still works well.
Best regards
---
Kuninori Morimoto
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
