> -----Original Message----- > From: Julian Sikorski [mailto:belegdol@xxxxxxxxx] > Sent: Wednesday, September 21, 2011 5:35 AM > To: Xu, Andiry > Subject: Re: problems with usb 3.0 on clevo p150hm > > W dniu 06.09.2011 05:00, Xu, Andiry pisze: > >> -----Original Message----- > >> From: linux-usb-owner-u79uwXL29TY76Z2rM5mHXA@xxxxxxxxxxxxxxxx > >> [mailto:linux-usb- owner-u79uwXL29TY76Z2rM5mHXA@xxxxxxxxxxxxxxxx] On > >> Behalf Of Julian Sikorski > >> Sent: Tuesday, September 06, 2011 5:13 AM > >> To: linux-usb-u79uwXL29TY76Z2rM5mHXA@xxxxxxxxxxxxxxxx > >> Subject: Re: problems with usb 3.0 on clevo p150hm > >> > >> OK, while this problem seems to happen only if I physically move the > >> laptop or the drive, here is what happens upon an attempt to > > disconnect > >> and reconnect the drive: > >> > >> Sep 5 23:09:50 snowball2 kernel: [14616.142633] xhci_hcd > > 0000:02:00.0: > >> ERROR no room on ep ring > >> Sep 5 23:09:50 snowball2 kernel: [14616.142648] xhci_hcd > > 0000:02:00.0: > >> ERR: No room for command on command ring Sep 5 23:09:50 snowball2 > >> kernel: [14616.142661] hub 3-0:1.0: couldn't allocate port 2 > >> usb_device Sep 5 23:09:52 snowball2 kernel: [14618.219332] xhci_hcd > > 0000:02:00.0: > >> ERROR no room on ep ring > >> Sep 5 23:09:52 snowball2 kernel: [14618.219347] xhci_hcd > > 0000:02:00.0: > >> ERR: No room for command on command ring Sep 5 23:09:52 snowball2 > >> kernel: [14618.219360] hub 4-0:1.0: couldn't allocate port 2 > >> usb_device > >> > >> Is that some sort of hardware failure I should investigate? > >> > > > > Can you apply the patch attached and post dmesg when the issue occurs? > > > > Thanks, > > Andiry > > The drive just stopped working for no apparent reason, dmesg attached. > Let me know if it helps, or if it is the same issue at all. > That is not the same issue you last mail showed, it's just like the device fail to respond to set address command after S3. Is the issue occurred without system enter and resume from suspend? Thanks, Andiry
Attachment:
dmesg.txt.bz2
Description: dmesg.txt.bz2
