On 09/12/11 15:12, Heikki Krogerus wrote: > Hi guys, > > On Wed, Sep 07, 2011 at 10:15:53AM +0300, Heikki Krogerus wrote: >> There were no comments in two weeks, so I'm dropping the RFC. >> Otherwise this is the same as the previous, no changes. >> >> Quick summary: >> This introduces struct usb_phy and struct usb_otg that >> replace struct otg_transceiver. The transceiver and phy >> members from struct otg_transceiver are left in struct >> usb_phy and otg specific members are moved to struct >> usb_otg. >> >> So the idea is simply to separate USB PHY handling from OTG. >> >> Heikki Krogerus (19): >> usb: otg: Rename otg_transceiver to usb_phy >> usb: otg: Rename usb_otg and usb_xceiv to usb_phy >> usb: otg: Separate otg members from usb_phy >> usb: otg: ab8500: Start using struct usb_otg >> usb: otg: fsl: Start using struct usb_otg >> usb: otg: gpio_vbus: Start using struct usb_otg >> usb: otg: isp1301_omap: Start using struct usb_otg >> usb: otg: msm: Start using struct usb_otg >> usb: otg: langwell: Start using struct usb_otg >> usb: otg: nop: Start using struct usb_otg >> usb: otg: twl4030: Start using struct usb_otg >> usb: otg: twl6030: Start using struct usb_otg >> usb: otg: ulpi: Start using struct usb_otg >> arm: imx: Start using struct usb_otg >> usb: musb: Start using struct usb_otg >> power_supply: Convert all users to new usb_phy >> usb: Convert all users to new usb_phy >> usb: otg: Remove OTG specific members from usb_phy >> usb: otg: Convert all users to pass struct usb_otg for OTG functions > > You guys are maintainers of the tranceiver/otg drivers. Can you test > these and ACK the patch for your driver if you feel there is nothing > wrong with these? I would much appreciate. > Currently, I cannot test this on my PXA3xx board, but I went through the patches and it looks fine. So, Acked-by: Igor Grinberg <grinberg@xxxxxxxxxxxxxx> for: pxa3xx and drivers/usb/otg/ulpi.c Would be nice to have the Acked/Tested-by from iMX guys. -- Regards, Igor. -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html