On 08/02/2011 05:33 PM, Per FORLIN wrote:
From: Per Forlin<per.forlin@xxxxxxxxxx>
The dma driver requires both src and dst to be set.
This fix is needed in order to run gadget mass storage.
Patch is verified on snowball.
Signed-off-by: Per Forlin<per.forlin@xxxxxxxxxx>
---
drivers/usb/musb/ux500_dma.c | 16 +++++++---------
1 files changed, 7 insertions(+), 9 deletions(-)
diff --git a/drivers/usb/musb/ux500_dma.c b/drivers/usb/musb/ux500_dma.c
index cecace4..2313475 100644
--- a/drivers/usb/musb/ux500_dma.c
+++ b/drivers/usb/musb/ux500_dma.c
@@ -133,15 +133,13 @@ static bool ux500_configure_channel(struct dma_channel *channel,
DMA_SLAVE_BUSWIDTH_4_BYTES;
slave_conf.direction = direction;
- if (direction == DMA_FROM_DEVICE) {
- slave_conf.src_addr = usb_fifo_addr;
- slave_conf.src_addr_width = addr_width;
- slave_conf.src_maxburst = 16;
- } else {
- slave_conf.dst_addr = usb_fifo_addr;
- slave_conf.dst_addr_width = addr_width;
- slave_conf.dst_maxburst = 16;
- }
+ slave_conf.src_addr = usb_fifo_addr;
+ slave_conf.src_addr_width = addr_width;
+ slave_conf.src_maxburst = 16;
+ slave_conf.dst_addr = usb_fifo_addr;
+ slave_conf.dst_addr_width = addr_width;
+ slave_conf.dst_maxburst = 16;
+
dma_chan->device->device_control(dma_chan, DMA_SLAVE_CONFIG,
(unsigned long)&slave_conf);
Acked-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@xxxxxxxxxxxxxx>
Thanks,
--
Mian Yousaf Kaukab
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
