[PATCH v2 2/4] ARM: tegra: Add support for Tegra USB PHYs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Interface used by Tegra's gadget driver and ehci driver
to power on and configure the USB PHYs.

Change-Id: I76b699d8cb74bf38034e95f3a2f1f322460e8f61
Signed-off-by: Benoit Goby <benoit@xxxxxxxxxxx>
---
 arch/arm/mach-tegra/Kconfig                |    3 +
 arch/arm/mach-tegra/Makefile               |    1 +
 arch/arm/mach-tegra/include/mach/usb_phy.h |   86 +++
 arch/arm/mach-tegra/usb_phy.c              |  795 ++++++++++++++++++++++++++++
 4 files changed, 885 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/mach-tegra/include/mach/usb_phy.h
 create mode 100644 arch/arm/mach-tegra/usb_phy.c

diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig
index acd9552..394b3c7 100644
--- a/arch/arm/mach-tegra/Kconfig
+++ b/arch/arm/mach-tegra/Kconfig
@@ -10,6 +10,9 @@ config ARCH_TEGRA_2x_SOC
 	select CPU_V7
 	select ARM_GIC
 	select ARCH_REQUIRE_GPIOLIB
+	select USB_ARCH_HAS_EHCI if USB_SUPPORT
+	select USB_ULPI if USB_SUPPORT
+	select USB_ULPI_VIEWPORT if USB_SUPPORT
 	help
 	  Support for NVIDIA Tegra AP20 and T20 processors, based on the
 	  ARM CortexA9MP CPU and the ARM PL310 L2 cache controller
diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile
index cdbc68e..38b66a8 100644
--- a/arch/arm/mach-tegra/Makefile
+++ b/arch/arm/mach-tegra/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_HOTPLUG_CPU)               += hotplug.o
 obj-$(CONFIG_TEGRA_SYSTEM_DMA)		+= dma.o
 obj-$(CONFIG_CPU_FREQ)                  += cpu-tegra.o
 obj-$(CONFIG_TEGRA_PCI)			+= pcie.o
+obj-$(CONFIG_USB_SUPPORT)		+= usb_phy.o
 
 obj-${CONFIG_MACH_HARMONY}              += board-harmony.o
 obj-${CONFIG_MACH_HARMONY}              += board-harmony-pinmux.o
diff --git a/arch/arm/mach-tegra/include/mach/usb_phy.h b/arch/arm/mach-tegra/include/mach/usb_phy.h
new file mode 100644
index 0000000..d4b8f9e
--- /dev/null
+++ b/arch/arm/mach-tegra/include/mach/usb_phy.h
@@ -0,0 +1,86 @@
+/*
+ * arch/arm/mach-tegra/include/mach/usb_phy.h
+ *
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __MACH_USB_PHY_H
+#define __MACH_USB_PHY_H
+
+#include <linux/clk.h>
+#include <linux/usb/otg.h>
+
+struct tegra_utmip_config {
+	u8 hssync_start_delay;
+	u8 elastic_limit;
+	u8 idle_wait_delay;
+	u8 term_range_adj;
+	u8 xcvr_setup;
+	u8 xcvr_lsfslew;
+	u8 xcvr_lsrslew;
+};
+
+struct tegra_ulpi_config {
+	int reset_gpio;
+	const char *clk;
+};
+
+enum tegra_usb_phy_port_speed {
+	TEGRA_USB_PHY_PORT_SPEED_FULL = 0,
+	TEGRA_USB_PHY_PORT_SPEED_LOW,
+	TEGRA_USB_PHY_PORT_SPEED_HIGH,
+};
+
+enum tegra_usb_phy_mode {
+	TEGRA_USB_PHY_MODE_DEVICE,
+	TEGRA_USB_PHY_MODE_HOST,
+};
+
+struct tegra_xtal_freq;
+
+struct tegra_usb_phy {
+	int instance;
+	const struct tegra_xtal_freq *freq;
+	void __iomem *regs;
+	void __iomem *pad_regs;
+	struct clk *clk;
+	struct clk *pll_u;
+	struct clk *pad_clk;
+	enum tegra_usb_phy_mode mode;
+	void *config;
+	struct otg_transceiver *ulpi;
+};
+
+struct tegra_usb_phy *tegra_usb_phy_open(int instance, void __iomem *regs,
+			void *config, enum tegra_usb_phy_mode phy_mode);
+
+int tegra_usb_phy_power_on(struct tegra_usb_phy *phy);
+
+void tegra_usb_phy_clk_disable(struct tegra_usb_phy *phy);
+
+void tegra_usb_phy_clk_enable(struct tegra_usb_phy *phy);
+
+void tegra_usb_phy_power_off(struct tegra_usb_phy *phy);
+
+void tegra_usb_phy_preresume(struct tegra_usb_phy *phy);
+
+void tegra_usb_phy_postresume(struct tegra_usb_phy *phy);
+
+void tegra_ehci_phy_restore_start(struct tegra_usb_phy *phy,
+				 enum tegra_usb_phy_port_speed port_speed);
+
+void tegra_ehci_phy_restore_end(struct tegra_usb_phy *phy);
+
+void tegra_usb_phy_close(struct tegra_usb_phy *phy);
+
+#endif /* __MACH_USB_PHY_H */
diff --git a/arch/arm/mach-tegra/usb_phy.c b/arch/arm/mach-tegra/usb_phy.c
new file mode 100644
index 0000000..88081bb
--- /dev/null
+++ b/arch/arm/mach-tegra/usb_phy.c
@@ -0,0 +1,795 @@
+/*
+ * arch/arm/mach-tegra/usb_phy.c
+ *
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * Author:
+ *	Erik Gilling <konkers@xxxxxxxxxx>
+ *	Benoit Goby <benoit@xxxxxxxxxxx>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/resource.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
+#include <asm/mach-types.h>
+#include <mach/usb_phy.h>
+#include <mach/iomap.h>
+
+#define ULPI_VIEWPORT		0x170
+
+#define USB_PORTSC1		0x184
+#define   USB_PORTSC1_PTS(x)	(((x) & 0x3) << 30)
+#define   USB_PORTSC1_PSPD(x)	(((x) & 0x3) << 26)
+#define   USB_PORTSC1_PHCD	(1 << 23)
+#define   USB_PORTSC1_WKOC	(1 << 22)
+#define   USB_PORTSC1_WKDS	(1 << 21)
+#define   USB_PORTSC1_WKCN	(1 << 20)
+#define   USB_PORTSC1_PTC(x)	(((x) & 0xf) << 16)
+#define   USB_PORTSC1_PP	(1 << 12)
+#define   USB_PORTSC1_SUSP	(1 << 7)
+#define   USB_PORTSC1_PE	(1 << 2)
+#define   USB_PORTSC1_CCS	(1 << 0)
+
+#define USB_SUSP_CTRL		0x400
+#define   USB_WAKE_ON_CNNT_EN_DEV	(1 << 3)
+#define   USB_WAKE_ON_DISCON_EN_DEV	(1 << 4)
+#define   USB_SUSP_CLR		(1 << 5)
+#define   USB_PHY_CLK_VALID	(1 << 7)
+#define   UTMIP_RESET			(1 << 11)
+#define   UHSIC_RESET			(1 << 11)
+#define   UTMIP_PHY_ENABLE		(1 << 12)
+#define   ULPI_PHY_ENABLE	(1 << 13)
+#define   USB_SUSP_SET		(1 << 14)
+#define   USB_WAKEUP_DEBOUNCE_COUNT(x)	(((x) & 0x7) << 16)
+
+#define USB1_LEGACY_CTRL	0x410
+#define   USB1_NO_LEGACY_MODE			(1 << 0)
+#define   USB1_VBUS_SENSE_CTL_MASK		(3 << 1)
+#define   USB1_VBUS_SENSE_CTL_VBUS_WAKEUP	(0 << 1)
+#define   USB1_VBUS_SENSE_CTL_AB_SESS_VLD_OR_VBUS_WAKEUP \
+						(1 << 1)
+#define   USB1_VBUS_SENSE_CTL_AB_SESS_VLD	(2 << 1)
+#define   USB1_VBUS_SENSE_CTL_A_SESS_VLD	(3 << 1)
+
+#define ULPI_TIMING_CTRL_0	0x424
+#define   ULPI_OUTPUT_PINMUX_BYP	(1 << 10)
+#define   ULPI_CLKOUT_PINMUX_BYP	(1 << 11)
+
+#define ULPI_TIMING_CTRL_1	0x428
+#define   ULPI_DATA_TRIMMER_LOAD	(1 << 0)
+#define   ULPI_DATA_TRIMMER_SEL(x)	(((x) & 0x7) << 1)
+#define   ULPI_STPDIRNXT_TRIMMER_LOAD	(1 << 16)
+#define   ULPI_STPDIRNXT_TRIMMER_SEL(x)	(((x) & 0x7) << 17)
+#define   ULPI_DIR_TRIMMER_LOAD		(1 << 24)
+#define   ULPI_DIR_TRIMMER_SEL(x)	(((x) & 0x7) << 25)
+
+#define UTMIP_PLL_CFG1		0x804
+#define   UTMIP_XTAL_FREQ_COUNT(x)		(((x) & 0xfff) << 0)
+#define   UTMIP_PLLU_ENABLE_DLY_COUNT(x)	(((x) & 0x1f) << 27)
+
+#define UTMIP_XCVR_CFG0		0x808
+#define   UTMIP_XCVR_SETUP(x)			(((x) & 0xf) << 0)
+#define   UTMIP_XCVR_LSRSLEW(x)			(((x) & 0x3) << 8)
+#define   UTMIP_XCVR_LSFSLEW(x)			(((x) & 0x3) << 10)
+#define   UTMIP_FORCE_PD_POWERDOWN		(1 << 14)
+#define   UTMIP_FORCE_PD2_POWERDOWN		(1 << 16)
+#define   UTMIP_FORCE_PDZI_POWERDOWN		(1 << 18)
+#define   UTMIP_XCVR_HSSLEW_MSB(x)		(((x) & 0x7f) << 25)
+
+#define UTMIP_BIAS_CFG0		0x80c
+#define   UTMIP_OTGPD			(1 << 11)
+#define   UTMIP_BIASPD			(1 << 10)
+
+#define UTMIP_HSRX_CFG0		0x810
+#define   UTMIP_ELASTIC_LIMIT(x)	(((x) & 0x1f) << 10)
+#define   UTMIP_IDLE_WAIT(x)		(((x) & 0x1f) << 15)
+
+#define UTMIP_HSRX_CFG1		0x814
+#define   UTMIP_HS_SYNC_START_DLY(x)	(((x) & 0x1f) << 1)
+
+#define UTMIP_TX_CFG0		0x820
+#define   UTMIP_FS_PREABMLE_J		(1 << 19)
+#define   UTMIP_HS_DISCON_DISABLE	(1 << 8)
+
+#define UTMIP_MISC_CFG0		0x824
+#define   UTMIP_DPDM_OBSERVE		(1 << 26)
+#define   UTMIP_DPDM_OBSERVE_SEL(x)	(((x) & 0xf) << 27)
+#define   UTMIP_DPDM_OBSERVE_SEL_FS_J	UTMIP_DPDM_OBSERVE_SEL(0xf)
+#define   UTMIP_DPDM_OBSERVE_SEL_FS_K	UTMIP_DPDM_OBSERVE_SEL(0xe)
+#define   UTMIP_DPDM_OBSERVE_SEL_FS_SE1 UTMIP_DPDM_OBSERVE_SEL(0xd)
+#define   UTMIP_DPDM_OBSERVE_SEL_FS_SE0 UTMIP_DPDM_OBSERVE_SEL(0xc)
+#define   UTMIP_SUSPEND_EXIT_ON_EDGE	(1 << 22)
+
+#define UTMIP_MISC_CFG1		0x828
+#define   UTMIP_PLL_ACTIVE_DLY_COUNT(x)	(((x) & 0x1f) << 18)
+#define   UTMIP_PLLU_STABLE_COUNT(x)	(((x) & 0xfff) << 6)
+
+#define UTMIP_DEBOUNCE_CFG0	0x82c
+#define   UTMIP_BIAS_DEBOUNCE_A(x)	(((x) & 0xffff) << 0)
+
+#define UTMIP_BAT_CHRG_CFG0	0x830
+#define   UTMIP_PD_CHRG			(1 << 0)
+
+#define UTMIP_SPARE_CFG0	0x834
+#define   FUSE_SETUP_SEL		(1 << 3)
+
+#define UTMIP_XCVR_CFG1		0x838
+#define   UTMIP_FORCE_PDDISC_POWERDOWN	(1 << 0)
+#define   UTMIP_FORCE_PDCHRP_POWERDOWN	(1 << 2)
+#define   UTMIP_FORCE_PDDR_POWERDOWN	(1 << 4)
+#define   UTMIP_XCVR_TERM_RANGE_ADJ(x)	(((x) & 0xf) << 18)
+
+#define UTMIP_BIAS_CFG1		0x83c
+#define   UTMIP_BIAS_PDTRK_COUNT(x)	(((x) & 0x1f) << 3)
+
+static DEFINE_SPINLOCK(utmip_pad_lock);
+static int utmip_pad_count;
+
+struct tegra_xtal_freq {
+	int freq;
+	u8 enable_delay;
+	u8 stable_count;
+	u8 active_delay;
+	u8 xtal_freq_count;
+	u16 debounce;
+};
+
+static const struct tegra_xtal_freq tegra_freq_table[] = {
+	{
+		.freq = 12000000,
+		.enable_delay = 0x02,
+		.stable_count = 0x2F,
+		.active_delay = 0x04,
+		.xtal_freq_count = 0x76,
+		.debounce = 0x7530,
+	},
+	{
+		.freq = 13000000,
+		.enable_delay = 0x02,
+		.stable_count = 0x33,
+		.active_delay = 0x05,
+		.xtal_freq_count = 0x7F,
+		.debounce = 0x7EF4,
+	},
+	{
+		.freq = 19200000,
+		.enable_delay = 0x03,
+		.stable_count = 0x4B,
+		.active_delay = 0x06,
+		.xtal_freq_count = 0xBB,
+		.debounce = 0xBB80,
+	},
+	{
+		.freq = 26000000,
+		.enable_delay = 0x04,
+		.stable_count = 0x66,
+		.active_delay = 0x09,
+		.xtal_freq_count = 0xFE,
+		.debounce = 0xFDE8,
+	},
+};
+
+static struct tegra_utmip_config utmip_default[] = {
+	[0] = {
+		.hssync_start_delay = 9,
+		.idle_wait_delay = 17,
+		.elastic_limit = 16,
+		.term_range_adj = 6,
+		.xcvr_setup = 9,
+		.xcvr_lsfslew = 1,
+		.xcvr_lsrslew = 1,
+	},
+	[2] = {
+		.hssync_start_delay = 9,
+		.idle_wait_delay = 17,
+		.elastic_limit = 16,
+		.term_range_adj = 6,
+		.xcvr_setup = 9,
+		.xcvr_lsfslew = 2,
+		.xcvr_lsrslew = 2,
+	},
+};
+
+static inline bool phy_is_ulpi(struct tegra_usb_phy *phy)
+{
+	return (phy->instance == 1);
+}
+
+static int utmip_pad_open(struct tegra_usb_phy *phy)
+{
+	phy->pad_clk = clk_get_sys("utmip-pad", NULL);
+	if (IS_ERR(phy->pad_clk)) {
+		pr_err("%s: can't get utmip pad clock\n", __func__);
+		return PTR_ERR(phy->pad_clk);
+	}
+
+	if (phy->instance == 0) {
+		phy->pad_regs = phy->regs;
+	} else {
+		phy->pad_regs = ioremap(TEGRA_USB_BASE, TEGRA_USB_SIZE);
+		if (!phy->pad_regs) {
+			pr_err("%s: can't remap usb registers\n", __func__);
+			clk_put(phy->pad_clk);
+			return -ENOMEM;
+		}
+	}
+	return 0;
+}
+
+static void utmip_pad_close(struct tegra_usb_phy *phy)
+{
+	if (phy->instance != 0)
+		iounmap(phy->pad_regs);
+	clk_put(phy->pad_clk);
+}
+
+static void utmip_pad_power_on(struct tegra_usb_phy *phy)
+{
+	unsigned long val, flags;
+	void __iomem *base = phy->pad_regs;
+
+	clk_enable(phy->pad_clk);
+
+	spin_lock_irqsave(&utmip_pad_lock, flags);
+
+	if (utmip_pad_count++ == 0) {
+		val = readl(base + UTMIP_BIAS_CFG0);
+		val &= ~(UTMIP_OTGPD | UTMIP_BIASPD);
+		writel(val, base + UTMIP_BIAS_CFG0);
+	}
+
+	spin_unlock_irqrestore(&utmip_pad_lock, flags);
+
+	clk_disable(phy->pad_clk);
+}
+
+static int utmip_pad_power_off(struct tegra_usb_phy *phy)
+{
+	unsigned long val, flags;
+	void __iomem *base = phy->pad_regs;
+
+	if (!utmip_pad_count) {
+		pr_err("%s: utmip pad already powered off\n", __func__);
+		return -EINVAL;
+	}
+
+	clk_enable(phy->pad_clk);
+
+	spin_lock_irqsave(&utmip_pad_lock, flags);
+
+	if (--utmip_pad_count == 0) {
+		val = readl(base + UTMIP_BIAS_CFG0);
+		val |= UTMIP_OTGPD | UTMIP_BIASPD;
+		writel(val, base + UTMIP_BIAS_CFG0);
+	}
+
+	spin_unlock_irqrestore(&utmip_pad_lock, flags);
+
+	clk_disable(phy->pad_clk);
+
+	return 0;
+}
+
+static int utmi_wait_register(void __iomem *reg, u32 mask, u32 result)
+{
+	unsigned long timeout = 2000;
+	do {
+		if ((readl(reg) & mask) == result)
+			return 0;
+		udelay(1);
+		timeout--;
+	} while (timeout);
+	return -1;
+}
+
+static void utmi_phy_clk_disable(struct tegra_usb_phy *phy)
+{
+	unsigned long val;
+	void __iomem *base = phy->regs;
+
+	if (phy->instance == 0) {
+		val = readl(base + USB_SUSP_CTRL);
+		val |= USB_SUSP_SET;
+		writel(val, base + USB_SUSP_CTRL);
+
+		udelay(10);
+
+		val = readl(base + USB_SUSP_CTRL);
+		val &= ~USB_SUSP_SET;
+		writel(val, base + USB_SUSP_CTRL);
+	}
+
+	if (phy->instance == 2) {
+		val = readl(base + USB_PORTSC1);
+		val |= USB_PORTSC1_PHCD;
+		writel(val, base + USB_PORTSC1);
+	}
+
+	if (utmi_wait_register(base + USB_SUSP_CTRL, USB_PHY_CLK_VALID, 0) < 0)
+		pr_err("%s: timeout waiting for phy to stabilize\n", __func__);
+}
+
+static void utmi_phy_clk_enable(struct tegra_usb_phy *phy)
+{
+	unsigned long val;
+	void __iomem *base = phy->regs;
+
+	if (phy->instance == 0) {
+		val = readl(base + USB_SUSP_CTRL);
+		val |= USB_SUSP_CLR;
+		writel(val, base + USB_SUSP_CTRL);
+
+		udelay(10);
+
+		val = readl(base + USB_SUSP_CTRL);
+		val &= ~USB_SUSP_CLR;
+		writel(val, base + USB_SUSP_CTRL);
+	}
+
+	if (phy->instance == 2) {
+		val = readl(base + USB_PORTSC1);
+		val &= ~USB_PORTSC1_PHCD;
+		writel(val, base + USB_PORTSC1);
+	}
+
+	if (utmi_wait_register(base + USB_SUSP_CTRL, USB_PHY_CLK_VALID,
+						     USB_PHY_CLK_VALID))
+		pr_err("%s: timeout waiting for phy to stabilize\n", __func__);
+}
+
+static int utmi_phy_power_on(struct tegra_usb_phy *phy)
+{
+	unsigned long val;
+	void __iomem *base = phy->regs;
+	struct tegra_utmip_config *config = phy->config;
+
+	val = readl(base + USB_SUSP_CTRL);
+	val |= UTMIP_RESET;
+	writel(val, base + USB_SUSP_CTRL);
+
+	if (phy->instance == 0) {
+		val = readl(base + USB1_LEGACY_CTRL);
+		val |= USB1_NO_LEGACY_MODE;
+		writel(val, base + USB1_LEGACY_CTRL);
+	}
+
+	val = readl(base + UTMIP_TX_CFG0);
+	val &= ~UTMIP_FS_PREABMLE_J;
+	writel(val, base + UTMIP_TX_CFG0);
+
+	val = readl(base + UTMIP_HSRX_CFG0);
+	val &= ~(UTMIP_IDLE_WAIT(~0) | UTMIP_ELASTIC_LIMIT(~0));
+	val |= UTMIP_IDLE_WAIT(config->idle_wait_delay);
+	val |= UTMIP_ELASTIC_LIMIT(config->elastic_limit);
+	writel(val, base + UTMIP_HSRX_CFG0);
+
+	val = readl(base + UTMIP_HSRX_CFG1);
+	val &= ~UTMIP_HS_SYNC_START_DLY(~0);
+	val |= UTMIP_HS_SYNC_START_DLY(config->hssync_start_delay);
+	writel(val, base + UTMIP_HSRX_CFG1);
+
+	val = readl(base + UTMIP_DEBOUNCE_CFG0);
+	val &= ~UTMIP_BIAS_DEBOUNCE_A(~0);
+	val |= UTMIP_BIAS_DEBOUNCE_A(phy->freq->debounce);
+	writel(val, base + UTMIP_DEBOUNCE_CFG0);
+
+	val = readl(base + UTMIP_MISC_CFG0);
+	val &= ~UTMIP_SUSPEND_EXIT_ON_EDGE;
+	writel(val, base + UTMIP_MISC_CFG0);
+
+	val = readl(base + UTMIP_MISC_CFG1);
+	val &= ~(UTMIP_PLL_ACTIVE_DLY_COUNT(~0) | UTMIP_PLLU_STABLE_COUNT(~0));
+	val |= UTMIP_PLL_ACTIVE_DLY_COUNT(phy->freq->active_delay) |
+		UTMIP_PLLU_STABLE_COUNT(phy->freq->stable_count);
+	writel(val, base + UTMIP_MISC_CFG1);
+
+	val = readl(base + UTMIP_PLL_CFG1);
+	val &= ~(UTMIP_XTAL_FREQ_COUNT(~0) | UTMIP_PLLU_ENABLE_DLY_COUNT(~0));
+	val |= UTMIP_XTAL_FREQ_COUNT(phy->freq->xtal_freq_count) |
+		UTMIP_PLLU_ENABLE_DLY_COUNT(phy->freq->enable_delay);
+	writel(val, base + UTMIP_PLL_CFG1);
+
+	if (phy->mode == TEGRA_USB_PHY_MODE_DEVICE) {
+		val = readl(base + USB_SUSP_CTRL);
+		val &= ~(USB_WAKE_ON_CNNT_EN_DEV | USB_WAKE_ON_DISCON_EN_DEV);
+		writel(val, base + USB_SUSP_CTRL);
+	}
+
+	utmip_pad_power_on(phy);
+
+	val = readl(base + UTMIP_XCVR_CFG0);
+	val &= ~(UTMIP_FORCE_PD_POWERDOWN | UTMIP_FORCE_PD2_POWERDOWN |
+		 UTMIP_FORCE_PDZI_POWERDOWN | UTMIP_XCVR_SETUP(~0) |
+		 UTMIP_XCVR_LSFSLEW(~0) | UTMIP_XCVR_LSRSLEW(~0) |
+		 UTMIP_XCVR_HSSLEW_MSB(~0));
+	val |= UTMIP_XCVR_SETUP(config->xcvr_setup);
+	val |= UTMIP_XCVR_LSFSLEW(config->xcvr_lsfslew);
+	val |= UTMIP_XCVR_LSRSLEW(config->xcvr_lsrslew);
+	writel(val, base + UTMIP_XCVR_CFG0);
+
+	val = readl(base + UTMIP_XCVR_CFG1);
+	val &= ~(UTMIP_FORCE_PDDISC_POWERDOWN | UTMIP_FORCE_PDCHRP_POWERDOWN |
+		 UTMIP_FORCE_PDDR_POWERDOWN | UTMIP_XCVR_TERM_RANGE_ADJ(~0));
+	val |= UTMIP_XCVR_TERM_RANGE_ADJ(config->term_range_adj);
+	writel(val, base + UTMIP_XCVR_CFG1);
+
+	val = readl(base + UTMIP_BAT_CHRG_CFG0);
+	val &= ~UTMIP_PD_CHRG;
+	writel(val, base + UTMIP_BAT_CHRG_CFG0);
+
+	val = readl(base + UTMIP_BIAS_CFG1);
+	val &= ~UTMIP_BIAS_PDTRK_COUNT(~0);
+	val |= UTMIP_BIAS_PDTRK_COUNT(0x5);
+	writel(val, base + UTMIP_BIAS_CFG1);
+
+	if (phy->instance == 0) {
+		val = readl(base + UTMIP_SPARE_CFG0);
+		if (phy->mode == TEGRA_USB_PHY_MODE_DEVICE)
+			val &= ~FUSE_SETUP_SEL;
+		else
+			val |= FUSE_SETUP_SEL;
+		writel(val, base + UTMIP_SPARE_CFG0);
+	}
+
+	if (phy->instance == 2) {
+		val = readl(base + USB_SUSP_CTRL);
+		val |= UTMIP_PHY_ENABLE;
+		writel(val, base + USB_SUSP_CTRL);
+	}
+
+	val = readl(base + USB_SUSP_CTRL);
+	val &= ~UTMIP_RESET;
+	writel(val, base + USB_SUSP_CTRL);
+
+	if (phy->instance == 0) {
+		val = readl(base + USB1_LEGACY_CTRL);
+		val &= ~USB1_VBUS_SENSE_CTL_MASK;
+		val |= USB1_VBUS_SENSE_CTL_A_SESS_VLD;
+		writel(val, base + USB1_LEGACY_CTRL);
+
+		val = readl(base + USB_SUSP_CTRL);
+		val &= ~USB_SUSP_SET;
+		writel(val, base + USB_SUSP_CTRL);
+	}
+
+	utmi_phy_clk_enable(phy);
+
+	if (phy->instance == 2) {
+		val = readl(base + USB_PORTSC1);
+		val &= ~USB_PORTSC1_PTS(~0);
+		writel(val, base + USB_PORTSC1);
+	}
+
+	return 0;
+}
+
+static void utmi_phy_power_off(struct tegra_usb_phy *phy)
+{
+	unsigned long val;
+	void __iomem *base = phy->regs;
+
+	utmi_phy_clk_disable(phy);
+
+	if (phy->mode == TEGRA_USB_PHY_MODE_DEVICE) {
+		val = readl(base + USB_SUSP_CTRL);
+		val &= ~USB_WAKEUP_DEBOUNCE_COUNT(~0);
+		val |= USB_WAKE_ON_CNNT_EN_DEV | USB_WAKEUP_DEBOUNCE_COUNT(5);
+		writel(val, base + USB_SUSP_CTRL);
+	}
+
+	val = readl(base + USB_SUSP_CTRL);
+	val |= UTMIP_RESET;
+	writel(val, base + USB_SUSP_CTRL);
+
+	val = readl(base + UTMIP_BAT_CHRG_CFG0);
+	val |= UTMIP_PD_CHRG;
+	writel(val, base + UTMIP_BAT_CHRG_CFG0);
+
+	val = readl(base + UTMIP_XCVR_CFG0);
+	val |= UTMIP_FORCE_PD_POWERDOWN | UTMIP_FORCE_PD2_POWERDOWN |
+	       UTMIP_FORCE_PDZI_POWERDOWN;
+	writel(val, base + UTMIP_XCVR_CFG0);
+
+	val = readl(base + UTMIP_XCVR_CFG1);
+	val |= UTMIP_FORCE_PDDISC_POWERDOWN | UTMIP_FORCE_PDCHRP_POWERDOWN |
+	       UTMIP_FORCE_PDDR_POWERDOWN;
+	writel(val, base + UTMIP_XCVR_CFG1);
+
+	utmip_pad_power_off(phy);
+}
+
+static void utmi_phy_preresume(struct tegra_usb_phy *phy)
+{
+	unsigned long val;
+	void __iomem *base = phy->regs;
+
+	val = readl(base + UTMIP_TX_CFG0);
+	val |= UTMIP_HS_DISCON_DISABLE;
+	writel(val, base + UTMIP_TX_CFG0);
+}
+
+static void utmi_phy_postresume(struct tegra_usb_phy *phy)
+{
+	unsigned long val;
+	void __iomem *base = phy->regs;
+
+	val = readl(base + UTMIP_TX_CFG0);
+	val &= ~UTMIP_HS_DISCON_DISABLE;
+	writel(val, base + UTMIP_TX_CFG0);
+}
+
+static void utmi_phy_restore_start(struct tegra_usb_phy *phy,
+				   enum tegra_usb_phy_port_speed port_speed)
+{
+	unsigned long val;
+	void __iomem *base = phy->regs;
+
+	val = readl(base + UTMIP_MISC_CFG0);
+	val &= ~UTMIP_DPDM_OBSERVE_SEL(~0);
+	if (port_speed == TEGRA_USB_PHY_PORT_SPEED_LOW)
+		val |= UTMIP_DPDM_OBSERVE_SEL_FS_K;
+	else
+		val |= UTMIP_DPDM_OBSERVE_SEL_FS_J;
+	writel(val, base + UTMIP_MISC_CFG0);
+	udelay(1);
+
+	val = readl(base + UTMIP_MISC_CFG0);
+	val |= UTMIP_DPDM_OBSERVE;
+	writel(val, base + UTMIP_MISC_CFG0);
+	udelay(10);
+}
+
+static void utmi_phy_restore_end(struct tegra_usb_phy *phy)
+{
+	unsigned long val;
+	void __iomem *base = phy->regs;
+
+	val = readl(base + UTMIP_MISC_CFG0);
+	val &= ~UTMIP_DPDM_OBSERVE;
+	writel(val, base + UTMIP_MISC_CFG0);
+	udelay(10);
+}
+
+static int ulpi_phy_power_on(struct tegra_usb_phy *phy)
+{
+	int ret;
+	unsigned long val;
+	void __iomem *base = phy->regs;
+	struct tegra_ulpi_config *config = phy->config;
+
+	gpio_direction_output(config->reset_gpio, 0);
+	msleep(5);
+	gpio_direction_output(config->reset_gpio, 1);
+
+	clk_enable(phy->clk);
+	msleep(1);
+
+	val = readl(base + USB_SUSP_CTRL);
+	val |= UHSIC_RESET;
+	writel(val, base + USB_SUSP_CTRL);
+
+	val = readl(base + ULPI_TIMING_CTRL_0);
+	val |= ULPI_OUTPUT_PINMUX_BYP | ULPI_CLKOUT_PINMUX_BYP;
+	writel(val, base + ULPI_TIMING_CTRL_0);
+
+	val = readl(base + USB_SUSP_CTRL);
+	val |= ULPI_PHY_ENABLE;
+	writel(val, base + USB_SUSP_CTRL);
+
+	val = 0;
+	writel(val, base + ULPI_TIMING_CTRL_1);
+
+	val |= ULPI_DATA_TRIMMER_SEL(4);
+	val |= ULPI_STPDIRNXT_TRIMMER_SEL(4);
+	val |= ULPI_DIR_TRIMMER_SEL(4);
+	writel(val, base + ULPI_TIMING_CTRL_1);
+	udelay(10);
+
+	val |= ULPI_DATA_TRIMMER_LOAD;
+	val |= ULPI_STPDIRNXT_TRIMMER_LOAD;
+	val |= ULPI_DIR_TRIMMER_LOAD;
+	writel(val, base + ULPI_TIMING_CTRL_1);
+
+	/* Fix VbusInvalid due to floating VBUS */
+	ret = otg_io_write(phy->ulpi, 0x40, 0x08);
+	if (ret) {
+		pr_err("%s: ulpi write failed\n", __func__);
+		return ret;
+	}
+
+	ret = otg_io_write(phy->ulpi, 0x80, 0x0B);
+	if (ret) {
+		pr_err("%s: ulpi write failed\n", __func__);
+		return ret;
+	}
+
+	val = readl(base + USB_PORTSC1);
+	val |= USB_PORTSC1_WKOC | USB_PORTSC1_WKDS | USB_PORTSC1_WKCN;
+	writel(val, base + USB_PORTSC1);
+
+	val = readl(base + USB_SUSP_CTRL);
+	val |= USB_SUSP_CLR;
+	writel(val, base + USB_SUSP_CTRL);
+	udelay(100);
+
+	val = readl(base + USB_SUSP_CTRL);
+	val &= ~USB_SUSP_CLR;
+	writel(val, base + USB_SUSP_CTRL);
+
+	return 0;
+}
+
+static void ulpi_phy_power_off(struct tegra_usb_phy *phy)
+{
+	unsigned long val;
+	void __iomem *base = phy->regs;
+	struct tegra_ulpi_config *config = phy->config;
+
+	/* Clear WKCN/WKDS/WKOC wake-on events that can cause the USB
+	 * Controller to immediately bring the ULPI PHY out of low power
+	 */
+	val = readl(base + USB_PORTSC1);
+	val &= ~(USB_PORTSC1_WKOC | USB_PORTSC1_WKDS | USB_PORTSC1_WKCN);
+	writel(val, base + USB_PORTSC1);
+
+	gpio_direction_output(config->reset_gpio, 0);
+	clk_disable(phy->clk);
+}
+
+struct tegra_usb_phy *tegra_usb_phy_open(int instance, void __iomem *regs,
+			void *config, enum tegra_usb_phy_mode phy_mode)
+{
+	struct tegra_usb_phy *phy;
+	struct tegra_ulpi_config *ulpi_config;
+	unsigned long parent_rate;
+	int i;
+	int err;
+
+	phy = kmalloc(sizeof(struct tegra_usb_phy), GFP_KERNEL);
+	if (!phy)
+		return ERR_PTR(-ENOMEM);
+
+	phy->instance = instance;
+	phy->regs = regs;
+	phy->config = config;
+	phy->mode = phy_mode;
+
+	if (!phy->config) {
+		if (phy_is_ulpi(phy)) {
+			pr_err("%s: ulpi phy configuration missing", __func__);
+			err = -EINVAL;
+			goto err0;
+		} else {
+			phy->config = &utmip_default[instance];
+		}
+	}
+
+	phy->pll_u = clk_get_sys(NULL, "pll_u");
+	if (IS_ERR(phy->pll_u)) {
+		pr_err("Can't get pll_u clock\n");
+		err = PTR_ERR(phy->pll_u);
+		goto err0;
+	}
+	clk_enable(phy->pll_u);
+
+	parent_rate = clk_get_rate(clk_get_parent(phy->pll_u));
+	for (i = 0; i < ARRAY_SIZE(tegra_freq_table); i++) {
+		if (tegra_freq_table[i].freq == parent_rate) {
+			phy->freq = &tegra_freq_table[i];
+			break;
+		}
+	}
+	if (!phy->freq) {
+		pr_err("invalid pll_u parent rate %ld\n", parent_rate);
+		err = -EINVAL;
+		goto err1;
+	}
+
+	if (phy_is_ulpi(phy)) {
+		ulpi_config = config;
+		phy->clk = clk_get_sys(NULL, ulpi_config->clk);
+		if (IS_ERR(phy->clk)) {
+			pr_err("%s: can't get ulpi clock\n", __func__);
+			err = -ENXIO;
+			goto err1;
+		}
+		tegra_gpio_enable(ulpi_config->reset_gpio);
+		gpio_request(ulpi_config->reset_gpio, "ulpi_phy_reset_b");
+		gpio_direction_output(ulpi_config->reset_gpio, 0);
+		phy->ulpi = otg_ulpi_create(&ulpi_viewport_access_ops, 0);
+		phy->ulpi->io_priv = regs + ULPI_VIEWPORT;
+	} else {
+		err = utmip_pad_open(phy);
+		if (err < 0)
+			goto err1;
+	}
+
+	return phy;
+
+err1:
+	clk_disable(phy->pll_u);
+	clk_put(phy->pll_u);
+err0:
+	kfree(phy);
+	return ERR_PTR(err);
+}
+
+int tegra_usb_phy_power_on(struct tegra_usb_phy *phy)
+{
+	if (phy_is_ulpi(phy))
+		return ulpi_phy_power_on(phy);
+	else
+		return utmi_phy_power_on(phy);
+}
+
+void tegra_usb_phy_power_off(struct tegra_usb_phy *phy)
+{
+	if (phy_is_ulpi(phy))
+		ulpi_phy_power_off(phy);
+	else
+		utmi_phy_power_off(phy);
+}
+
+void tegra_usb_phy_preresume(struct tegra_usb_phy *phy)
+{
+	if (!phy_is_ulpi(phy))
+		utmi_phy_preresume(phy);
+}
+
+void tegra_usb_phy_postresume(struct tegra_usb_phy *phy)
+{
+	if (!phy_is_ulpi(phy))
+		utmi_phy_postresume(phy);
+}
+
+void tegra_ehci_phy_restore_start(struct tegra_usb_phy *phy,
+				 enum tegra_usb_phy_port_speed port_speed)
+{
+	if (!phy_is_ulpi(phy))
+		utmi_phy_restore_start(phy, port_speed);
+}
+
+void tegra_ehci_phy_restore_end(struct tegra_usb_phy *phy)
+{
+	if (!phy_is_ulpi(phy))
+		utmi_phy_restore_end(phy);
+}
+
+void tegra_usb_phy_clk_disable(struct tegra_usb_phy *phy)
+{
+	if (!phy_is_ulpi(phy))
+		utmi_phy_clk_disable(phy);
+}
+
+void tegra_usb_phy_clk_enable(struct tegra_usb_phy *phy)
+{
+	if (!phy_is_ulpi(phy))
+		utmi_phy_clk_enable(phy);
+}
+
+void tegra_usb_phy_close(struct tegra_usb_phy *phy)
+{
+	if (phy_is_ulpi(phy))
+		clk_put(phy->clk);
+	else
+		utmip_pad_close(phy);
+	clk_disable(phy->pll_u);
+	clk_put(phy->pll_u);
+	kfree(phy);
+}
-- 
1.7.3.1

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux