This patch series adds support for EHCI compliant USB host controllers found in Tegra SoCs. The EHCI driver depends on the Tegra PHY configuration interface that is used by both tegra ehci driver and gadget driver. Tested on 2.6.38rc4. v2 changes: * Add ulpi_viewport.c for controllers with a viewport register * Update tegra usb_phy interface * Remove tegra_ehci_reset and use ehci_reset or tdi_reset instead * Select USB_ARCH_HAS_EHCI in tegra/Kconfig instead of usb/Kconfig Benoit Goby (3): usb: otg: Add ulpi viewport access ops ARM: tegra: Add support for Tegra USB PHYs usb: host: Add EHCI driver for NVIDIA Tegra SoCs Robert Morell (1): USB: ehci: tegra: Align DMA transfers to 32 bytes arch/arm/mach-tegra/Kconfig | 3 + arch/arm/mach-tegra/Makefile | 1 + arch/arm/mach-tegra/include/mach/usb_phy.h | 86 +++ arch/arm/mach-tegra/usb_phy.c | 795 ++++++++++++++++++++++++++++ drivers/usb/host/Kconfig | 8 + drivers/usb/host/ehci-hcd.c | 5 + drivers/usb/host/ehci-tegra.c | 716 +++++++++++++++++++++++++ drivers/usb/otg/Kconfig | 7 + drivers/usb/otg/Makefile | 1 + drivers/usb/otg/ulpi_viewport.c | 81 +++ include/linux/tegra_usb.h | 35 ++ include/linux/usb/ulpi.h | 5 + 12 files changed, 1743 insertions(+), 0 deletions(-) create mode 100644 arch/arm/mach-tegra/include/mach/usb_phy.h create mode 100644 arch/arm/mach-tegra/usb_phy.c create mode 100644 drivers/usb/host/ehci-tegra.c create mode 100644 drivers/usb/otg/ulpi_viewport.c create mode 100644 include/linux/tegra_usb.h -- 1.7.3.1 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
