Kevin, >-----Original Message----- >From: Kevin Hilman [mailto:khilman@xxxxxxxxxxxxxxxxxxx] >Sent: Wednesday, February 09, 2011 5:33 AM >To: Hema HK >Cc: linux-usb@xxxxxxxxxxxxxxx; linux-omap@xxxxxxxxxxxxxxx; >Felipe Balbi; Tony Lindgren; Cousson, Benoit; Paul Walmsley >Subject: Re: [PATCH 4/5 v5] OMAP2+: musb: HWMOD adaptation for musb. > >On Fri, 2010-12-10 at 20:05 +0530, Hema HK wrote: >> Using omap_device_build API instead of platform_device_register for >> OMAP2430,OMAP34xx and OMAP4430 musb device registration. >> The device specific resources defined in centralized >> database will be used. >> >> Signed-off-by: Hema HK <hemahk@xxxxxx> >> Cc: Felipe Balbi <balbi@xxxxxx> >> Cc: Tony Lindgren <tony@xxxxxxxxxxx> >> Cc: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx> >> Cc: Cousson, Benoit <b-cousson@xxxxxx> >> Cc: Paul Walmsley <paul@xxxxxxxxx> >> --- >> arch/arm/mach-omap2/usb-musb.c | 76 >+++++++++++++++++++++++++++++------------ >> 1 file changed, 55 insertions(+), 21 deletions(-) >> >> Index: usb/arch/arm/mach-omap2/usb-musb.c >> =================================================================== >> --- usb.orig/arch/arm/mach-omap2/usb-musb.c >> +++ usb/arch/arm/mach-omap2/usb-musb.c >> @@ -31,9 +31,12 @@ >> #include <mach/am35xx.h> >> #include <plat/usb.h> >> #include "control.h" >> +#include <plat/omap_device.h> >> >> #if defined(CONFIG_USB_MUSB_OMAP2PLUS) || defined >(CONFIG_USB_MUSB_AM35X) >> >> +static const char name[] = "musb-omap2430"; >> + >> static void am35x_musb_reset(void) >> { >> u32 regval; >> @@ -170,7 +173,7 @@ static struct musb_hdrc_platform_data mu >> static u64 musb_dmamask = DMA_BIT_MASK(32); >> >> static struct platform_device musb_device = { >> - .name = "musb-omap2430", >> + .name = "musb-am35x", > >Should be in AM35x specific code. > >> .id = -1, >> .dev = { >> .dma_mask = &musb_dmamask, >> @@ -181,26 +184,23 @@ static struct platform_device musb_devic >> .resource = musb_resources, >> }; >> >> +static struct omap_device_pm_latency omap_musb_latency[] = { >> + { >> + .deactivate_func = omap_device_idle_hwmods, >> + .activate_func = omap_device_enable_hwmods, >> + .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST, >> + }, >> +}; >> + >> void __init usb_musb_init(struct omap_musb_board_data *board_data) >> { >> - if (cpu_is_omap243x()) { >> - musb_resources[0].start = OMAP243X_HS_BASE; >> - } else if (cpu_is_omap3517() || cpu_is_omap3505()) { >> - musb_device.name = "musb-am35x"; >> - musb_resources[0].start = AM35XX_IPSS_USBOTGSS_BASE; >> - musb_resources[1].start = INT_35XX_USBOTG_IRQ; >> - board_data->set_phy_power = am35x_musb_phy_power; >> - board_data->clear_irq = am35x_musb_clear_irq; >> - board_data->set_mode = am35x_musb_set_mode; >> - board_data->reset = am35x_musb_reset; >> - } else if (cpu_is_omap34xx()) { >> - musb_resources[0].start = OMAP34XX_HSUSB_OTG_BASE; >> - } else if (cpu_is_omap44xx()) { >> - musb_resources[0].start = OMAP44XX_HSUSB_OTG_BASE; >> - musb_resources[1].start = OMAP44XX_IRQ_HS_USB_MC_N; >> - musb_resources[2].start = OMAP44XX_IRQ_HS_USB_DMA_N; >> - } >> - musb_resources[0].end = musb_resources[0].start + SZ_4K - 1; >> + struct omap_hwmod *oh; >> + struct omap_device *od; >> + struct platform_device *pdev; >> + struct device *dev; >> + int bus_id = -1; >> + const char *oh_name = "usb_otg_hs"; >> + struct musb_hdrc_platform_data *pdata; >> >> /* >> * REVISIT: This line can be removed once all the >platforms using >> @@ -212,8 +212,42 @@ void __init usb_musb_init(struct omap_mu >> musb_plat.mode = board_data->mode; >> musb_plat.extvbus = board_data->extvbus; >> >> - if (platform_device_register(&musb_device) < 0) >> - printk(KERN_ERR "Unable to register HS-USB >(MUSB) device\n"); >> + if (cpu_is_omap3517() || cpu_is_omap3505()) { >> + musb_resources[0].start = AM35XX_IPSS_USBOTGSS_BASE; >> + musb_resources[1].start = INT_35XX_USBOTG_IRQ; >> + board_data->set_phy_power = am35x_musb_phy_power; >> + board_data->clear_irq = am35x_musb_clear_irq; >> + board_data->set_mode = am35x_musb_set_mode; >> + board_data->reset = am35x_musb_reset; >> + musb_resources[0].end = musb_resources[0].start >+ SZ_4K - 1; >> + >> + if (platform_device_register(&musb_device) < 0) >> + printk(KERN_ERR "Unable to register HS-USB \ >> + (MUSB) device\n"); > >The need for 'if cpu_is_*' here should be a red flag indicating a >problem with this code. > >The goal of hwmod was to be able to get rid of this kind of cpu_is_* >cruft. At least the base and IRQ stuff should not be needed >here. What >is needed is hwmod data for AM35x where it is different from the >"normal" OMAP3. This file shared between the OMAP3 and AM35x. Since there is no HWMOD adaptation done for AM35x we have to live this till that is done. > >I'm not exactly sure what the rest of these pdata function pointers are >doing here since there seems to be an AM35x specific version of the >driver in drivers/usb/musb, but that part isn't for me to decide. > There was discussion with Felipe and Benoit on this and decided to go with cpu check till the HWMOD adaption is done for AM35x. Regards, Hema >Kevin > > >> + } else { >> + oh = omap_hwmod_lookup(oh_name); >> + if (!oh) { >> + pr_err("Could not look up %s\n", oh_name); >> + return; >> + } >> + >> + pdata = &musb_plat; >> + od = omap_device_build(name, bus_id, oh, pdata, >> + sizeof(*pdata), >omap_musb_latency, >> + >ARRAY_SIZE(omap_musb_latency), false); >> + if (IS_ERR(od)) { >> + pr_err("Could not build omap_device for >%s %s\n", >> + name, oh_name); >> + return; >> + } >> + >> + pdev = &od->pdev; >> + dev = &pdev->dev; >> + get_device(dev); >> + dev->dma_mask = &musb_dmamask; >> + dev->coherent_dma_mask = musb_dmamask; >> + put_device(dev); >> + } >> } >> >> #else > > > -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
