On Fri, 2010-12-10 at 20:05 +0530, Hema HK wrote:
> Using omap_device_build API instead of platform_device_register for
> OMAP2430,OMAP34xx and OMAP4430 musb device registration.
> The device specific resources defined in centralized
> database will be used.
>
> Signed-off-by: Hema HK <hemahk@xxxxxx>
> Cc: Felipe Balbi <balbi@xxxxxx>
> Cc: Tony Lindgren <tony@xxxxxxxxxxx>
> Cc: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
> Cc: Cousson, Benoit <b-cousson@xxxxxx>
> Cc: Paul Walmsley <paul@xxxxxxxxx>
> ---
> arch/arm/mach-omap2/usb-musb.c | 76 +++++++++++++++++++++++++++++------------
> 1 file changed, 55 insertions(+), 21 deletions(-)
>
> Index: usb/arch/arm/mach-omap2/usb-musb.c
> ===================================================================
> --- usb.orig/arch/arm/mach-omap2/usb-musb.c
> +++ usb/arch/arm/mach-omap2/usb-musb.c
> @@ -31,9 +31,12 @@
> #include <mach/am35xx.h>
> #include <plat/usb.h>
> #include "control.h"
> +#include <plat/omap_device.h>
>
> #if defined(CONFIG_USB_MUSB_OMAP2PLUS) || defined (CONFIG_USB_MUSB_AM35X)
>
> +static const char name[] = "musb-omap2430";
> +
> static void am35x_musb_reset(void)
> {
> u32 regval;
> @@ -170,7 +173,7 @@ static struct musb_hdrc_platform_data mu
> static u64 musb_dmamask = DMA_BIT_MASK(32);
>
> static struct platform_device musb_device = {
> - .name = "musb-omap2430",
> + .name = "musb-am35x",
Should be in AM35x specific code.
> .id = -1,
> .dev = {
> .dma_mask = &musb_dmamask,
> @@ -181,26 +184,23 @@ static struct platform_device musb_devic
> .resource = musb_resources,
> };
>
> +static struct omap_device_pm_latency omap_musb_latency[] = {
> + {
> + .deactivate_func = omap_device_idle_hwmods,
> + .activate_func = omap_device_enable_hwmods,
> + .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
> + },
> +};
> +
> void __init usb_musb_init(struct omap_musb_board_data *board_data)
> {
> - if (cpu_is_omap243x()) {
> - musb_resources[0].start = OMAP243X_HS_BASE;
> - } else if (cpu_is_omap3517() || cpu_is_omap3505()) {
> - musb_device.name = "musb-am35x";
> - musb_resources[0].start = AM35XX_IPSS_USBOTGSS_BASE;
> - musb_resources[1].start = INT_35XX_USBOTG_IRQ;
> - board_data->set_phy_power = am35x_musb_phy_power;
> - board_data->clear_irq = am35x_musb_clear_irq;
> - board_data->set_mode = am35x_musb_set_mode;
> - board_data->reset = am35x_musb_reset;
> - } else if (cpu_is_omap34xx()) {
> - musb_resources[0].start = OMAP34XX_HSUSB_OTG_BASE;
> - } else if (cpu_is_omap44xx()) {
> - musb_resources[0].start = OMAP44XX_HSUSB_OTG_BASE;
> - musb_resources[1].start = OMAP44XX_IRQ_HS_USB_MC_N;
> - musb_resources[2].start = OMAP44XX_IRQ_HS_USB_DMA_N;
> - }
> - musb_resources[0].end = musb_resources[0].start + SZ_4K - 1;
> + struct omap_hwmod *oh;
> + struct omap_device *od;
> + struct platform_device *pdev;
> + struct device *dev;
> + int bus_id = -1;
> + const char *oh_name = "usb_otg_hs";
> + struct musb_hdrc_platform_data *pdata;
>
> /*
> * REVISIT: This line can be removed once all the platforms using
> @@ -212,8 +212,42 @@ void __init usb_musb_init(struct omap_mu
> musb_plat.mode = board_data->mode;
> musb_plat.extvbus = board_data->extvbus;
>
> - if (platform_device_register(&musb_device) < 0)
> - printk(KERN_ERR "Unable to register HS-USB (MUSB) device\n");
> + if (cpu_is_omap3517() || cpu_is_omap3505()) {
> + musb_resources[0].start = AM35XX_IPSS_USBOTGSS_BASE;
> + musb_resources[1].start = INT_35XX_USBOTG_IRQ;
> + board_data->set_phy_power = am35x_musb_phy_power;
> + board_data->clear_irq = am35x_musb_clear_irq;
> + board_data->set_mode = am35x_musb_set_mode;
> + board_data->reset = am35x_musb_reset;
> + musb_resources[0].end = musb_resources[0].start + SZ_4K - 1;
> +
> + if (platform_device_register(&musb_device) < 0)
> + printk(KERN_ERR "Unable to register HS-USB \
> + (MUSB) device\n");
The need for 'if cpu_is_*' here should be a red flag indicating a
problem with this code.
The goal of hwmod was to be able to get rid of this kind of cpu_is_*
cruft. At least the base and IRQ stuff should not be needed here. What
is needed is hwmod data for AM35x where it is different from the
"normal" OMAP3.
I'm not exactly sure what the rest of these pdata function pointers are
doing here since there seems to be an AM35x specific version of the
driver in drivers/usb/musb, but that part isn't for me to decide.
Kevin
> + } else {
> + oh = omap_hwmod_lookup(oh_name);
> + if (!oh) {
> + pr_err("Could not look up %s\n", oh_name);
> + return;
> + }
> +
> + pdata = &musb_plat;
> + od = omap_device_build(name, bus_id, oh, pdata,
> + sizeof(*pdata), omap_musb_latency,
> + ARRAY_SIZE(omap_musb_latency), false);
> + if (IS_ERR(od)) {
> + pr_err("Could not build omap_device for %s %s\n",
> + name, oh_name);
> + return;
> + }
> +
> + pdev = &od->pdev;
> + dev = &pdev->dev;
> + get_device(dev);
> + dev->dma_mask = &musb_dmamask;
> + dev->coherent_dma_mask = musb_dmamask;
> + put_device(dev);
> + }
> }
>
> #else
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
