Hello, Two months ago I purchased a USB 3.0 card for my computer and it worked amazingly well with Linux right out of the box. I got tired of having to reach behind my computer to switch cables so I purchased a USB 3.0 hub last week and while Linux detects the hub and knows its a SuperSpeed device it is automatically downgraded to USB 2.0 speeds. I checked the dmesg log and it said the following: "usb 2-1: new SuperSpeed USB device using xhci_hcd and address 2" <more messages> "hub 2-1:1.0: config failed, can't read hub descriptor (err -22)" The interesting part is that the transfer rate of all three of my USB 3.0 HDD enclosures in this mode is about 30-40 megabytes per second. If I plug the device into the ports on the back of the computer directly I get 80-125 megabytes per second so I know it's an issue with the hub. I even double checked that I didn't get scammed using Kinfocenter and it said that it was a USB 3.0 hub with a VIA chipset with a USB 2.0 hub subdevice. My question is am I doing something wrong or is this a bug? My USB 3.0 Card is registered in Linux as: NEC Corporation uPD720200 USB 3.0 Host Controller Thank you in advance Joshua Scoggins Here is my dmesg log: Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.37-ARCH (tobias@T-POWA-LX) (gcc version 4.5.2 (GCC) ) #1 SMP PREEMPT Sat Jan 29 20:00:33 CET 2011 Command line: BOOT_IMAGE=/vmlinuz26 root=/dev/disk/by-uuid/118e51a8-e243-4fed-8ef8-932e74c7349e ro quiet BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009e000 (usable) BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000cff80000 (usable) BIOS-e820: 00000000cff80000 - 00000000cff8e000 (ACPI data) BIOS-e820: 00000000cff8e000 - 00000000cffe0000 (ACPI NVS) BIOS-e820: 00000000cffe0000 - 00000000d0000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000230000000 (usable) NX (Execute Disable) protection: active DMI 2.4 present. DMI: P5E/P5E, BIOS 1201 02/19/2009 e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) No AGP bridge found last_pfn = 0x230000 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-DFFFF write-protect E0000-EFFFF write-through F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 0D0000000 mask FF0000000 uncachable 1 base 0E0000000 mask FE0000000 uncachable 2 base 000000000 mask E00000000 write-back 3 base 200000000 mask FE0000000 write-back 4 base 220000000 mask FF0000000 write-back 5 disabled 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved) last_pfn = 0xcff80 max_arch_pfn = 0x400000000 found SMP MP-table at [ffff8800000ff780] ff780 Scanning 0 areas for low memory corruption initial memory mapped : 0 - 20000000 init_memory_mapping: 0000000000000000-00000000cff80000 0000000000 - 00cfe00000 page 2M 00cfe00000 - 00cff80000 page 4k kernel direct mapping tables up to cff80000 @ 1fffa000-20000000 init_memory_mapping: 0000000100000000-0000000230000000 0100000000 - 0230000000 page 2M kernel direct mapping tables up to 230000000 @ cff76000-cff80000 RAMDISK: 37e37000 - 37ff0000 ACPI: RSDP 00000000000fbe10 00024 (v02 ACPIAM) ACPI: XSDT 00000000cff80100 00054 (v01 A_M_I_ OEMXSDT 02000919 MSFT 00000097) ACPI: FACP 00000000cff80290 000F4 (v03 A_M_I_ OEMFACP 02000919 MSFT 00000097) ACPI: DSDT 00000000cff80440 0A05A (v01 A0905 A0905002 00000002 INTL 20060113) ACPI: FACS 00000000cff8e000 00040 ACPI: APIC 00000000cff80390 0006C (v01 A_M_I_ OEMAPIC 02000919 MSFT 00000097) ACPI: MCFG 00000000cff80400 0003C (v01 A_M_I_ OEMMCFG 02000919 MSFT 00000097) ACPI: OEMB 00000000cff8e040 00081 (v01 A_M_I_ AMI_OEM 02000919 MSFT 00000097) ACPI: HPET 00000000cff8a4a0 00038 (v01 A_M_I_ OEMHPET 02000919 MSFT 00000097) ACPI: OSFR 00000000cff8a4e0 000B0 (v01 A_M_I_ OEMOSFR 02000919 MSFT 00000097) ACPI: Local APIC address 0xfee00000 [ffffea0000000000-ffffea0007bfffff] PMD -> [ffff8800bc000000-ffff8800c31fffff] on node 0 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00230000 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0x00000010 -> 0x0000009e 0: 0x00000100 -> 0x000cff80 0: 0x00100000 -> 0x00230000 On node 0 totalpages: 2096910 DMA zone: 56 pages used for memmap DMA zone: 6 pages reserved DMA zone: 3920 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 833464 pages, LIFO batch:31 Normal zone: 17024 pages used for memmap Normal zone: 1228160 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0xffffffff base: 0xfed00000 SMP: Allowing 4 CPUs, 0 hotplug CPUs nr_irqs_gsi: 40 PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000 PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 PM: Registered nosave memory: 00000000cff80000 - 00000000cff8e000 PM: Registered nosave memory: 00000000cff8e000 - 00000000cffe0000 PM: Registered nosave memory: 00000000cffe0000 - 00000000d0000000 PM: Registered nosave memory: 00000000d0000000 - 00000000e0000000 PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 PM: Registered nosave memory: 00000000f0000000 - 00000000fee00000 PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000 PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000 Allocating PCI resources starting at d0000000 (gap: d0000000:10000000) Booting paravirtualized kernel on bare hardware setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 PERCPU: Embedded 27 pages/cpu @ffff8800cfc00000 s81664 r8192 d20736 u524288 pcpu-alloc: s81664 r8192 d20736 u524288 alloc=1*2097152 pcpu-alloc: [0] 0 1 2 3 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2065544 Kernel command line: BOOT_IMAGE=/vmlinuz26 root=/dev/disk/by-uuid/118e51a8-e243-4fed-8ef8-932e74c7349e ro quiet PID hash table entries: 4096 (order: 3, 32768 bytes) Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240 Checking aperture... No AGP bridge found Calgary: detecting Calgary via BIOS EBDA area Calgary: Unable to locate Rio Grande table in EBDA - bailing! Memory: 8182064k/9175040k available (3751k kernel code, 787400k absent, 205576k reserved, 2002k data, 512k init) SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Preemptable hierarchical RCU implementation. RCU-based detection of stalled CPUs is disabled. Verbose stalled-CPUs detection is disabled. NR_IRQS:2304 Extended CMOS year: 2000 Console: colour VGA+ 80x25 console [tty0] enabled allocated 83886080 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups hpet clockevent registered Fast TSC calibration failed TSC: PIT calibration matches HPET. 1 loops Detected 2838.580 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 5679.70 BogoMIPS (lpj=9461933) pid_max: default: 32768 minimum: 301 Security Framework initialized AppArmor: AppArmor disabled by boot time parameter Mount-cache hash table entries: 256 Initializing cgroup subsys ns ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup. Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys net_cls Initializing cgroup subsys blkio CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 6 MCE banks CPU0: Thermal monitoring enabled (TM2) using mwait in idle threads. Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver. ... version: 2 ... bit width: 40 ... generic registers: 2 ... value mask: 000000ffffffffff ... max period: 000000007fffffff ... fixed-purpose events: 3 ... event mask: 0000000700000003 ACPI: Core revision 20101013 Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz stepping 0a NMI watchdog enabled, takes one hw-pmu counter. Booting Node 0, Processors #1 NMI watchdog enabled, takes one hw-pmu counter. #2 NMI watchdog enabled, takes one hw-pmu counter. #3 Ok. NMI watchdog enabled, takes one hw-pmu counter. Brought up 4 CPUs Total of 4 processors activated (26882.37 BogoMIPS). devtmpfs: initialized NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 PCI: Using configuration type 1 for base access bio: create slab <bio-0> at 0 ACPI: EC: Look up EC in DSDT ACPI: Executed 1 blocks of module-level executable AML code ACPI: SSDT 00000000cff8e0d0 001D2 (v01 AMI CPU1PM 00000001 INTL 20060113) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 001D2 (v01 AMI CPU1PM 00000001 INTL 20060113) ACPI: SSDT 00000000cff8e2b0 00143 (v01 AMI CPU2PM 00000001 INTL 20060113) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 00143 (v01 AMI CPU2PM 00000001 INTL 20060113) ACPI: SSDT 00000000cff8e400 00143 (v01 AMI CPU3PM 00000001 INTL 20060113) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 00143 (v01 AMI CPU3PM 00000001 INTL 20060113) ACPI: SSDT 00000000cff8e550 00143 (v01 AMI CPU4PM 00000001 INTL 20060113) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 00143 (v01 AMI CPU4PM 00000001 INTL 20060113) ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-723) ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-723) ACPI: No dock devices found. PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff] pci_root PNP0A08:00: host bridge window [mem 0xd0000000-0xffffffff] pci 0000:00:00.0: [8086:29e0] type 0 class 0x000600 pci 0000:00:01.0: [8086:29e1] type 1 class 0x000604 pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:01.0: PME# disabled pci 0000:00:06.0: [8086:29e9] type 1 class 0x000604 pci 0000:00:06.0: PME# supported from D0 D3hot D3cold pci 0000:00:06.0: PME# disabled pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03 pci 0000:00:1a.0: reg 20: [io 0xa800-0xa81f] pci 0000:00:1a.1: [8086:2938] type 0 class 0x000c03 pci 0000:00:1a.1: reg 20: [io 0xa880-0xa89f] pci 0000:00:1a.2: [8086:2939] type 0 class 0x000c03 pci 0000:00:1a.2: reg 20: [io 0xac00-0xac1f] pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03 pci 0000:00:1a.7: reg 10: [mem 0xfbfffc00-0xfbffffff] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled pci 0000:00:1b.0: [8086:293e] type 0 class 0x000403 pci 0000:00:1b.0: reg 10: [mem 0xfbff8000-0xfbffbfff 64bit] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: [8086:2940] type 1 class 0x000604 pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.2: [8086:2944] type 1 class 0x000604 pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold pci 0000:00:1c.2: PME# disabled pci 0000:00:1c.3: [8086:2946] type 1 class 0x000604 pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold pci 0000:00:1c.3: PME# disabled pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03 pci 0000:00:1d.0: reg 20: [io 0xa080-0xa09f] pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03 pci 0000:00:1d.1: reg 20: [io 0xa400-0xa41f] pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03 pci 0000:00:1d.2: reg 20: [io 0xa480-0xa49f] pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03 pci 0000:00:1d.7: reg 10: [mem 0xfbfff800-0xfbfffbff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604 pci 0000:00:1f.0: [8086:2916] type 0 class 0x000601 pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003) pci 0000:00:1f.2: [8086:2822] type 0 class 0x000104 pci 0000:00:1f.2: reg 10: [io 0x9c00-0x9c07] pci 0000:00:1f.2: reg 14: [io 0x9880-0x9883] pci 0000:00:1f.2: reg 18: [io 0x9800-0x9807] pci 0000:00:1f.2: reg 1c: [io 0x9480-0x9483] pci 0000:00:1f.2: reg 20: [io 0x9400-0x941f] pci 0000:00:1f.2: reg 24: [mem 0xfbffe800-0xfbffefff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: [8086:2930] type 0 class 0x000c05 pci 0000:00:1f.3: reg 10: [mem 0xfbfff400-0xfbfff4ff 64bit] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f] pci 0000:01:00.0: [10de:0e22] type 0 class 0x000300 pci 0000:01:00.0: reg 10: [mem 0xfc000000-0xfdffffff] pci 0000:01:00.0: reg 14: [mem 0xd8000000-0xdfffffff 64bit pref] pci 0000:01:00.0: reg 1c: [mem 0xd4000000-0xd7ffffff 64bit pref] pci 0000:01:00.0: reg 24: [io 0xbc00-0xbc7f] pci 0000:01:00.0: reg 30: [mem 0xfe700000-0xfe77ffff pref] pci 0000:01:00.1: [10de:0beb] type 0 class 0x000403 pci 0000:01:00.1: reg 10: [mem 0xfe7fc000-0xfe7fffff] pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff] pci 0000:00:01.0: bridge window [mem 0xfc000000-0xfe7fffff] pci 0000:00:01.0: bridge window [mem 0xd4000000-0xdfffffff 64bit pref] pci 0000:02:00.0: [1000:0079] type 0 class 0x000104 pci 0000:02:00.0: reg 10: [io 0xc800-0xc8ff] pci 0000:02:00.0: reg 14: [mem 0xfe8fc000-0xfe8fffff 64bit] pci 0000:02:00.0: reg 1c: [mem 0xfe880000-0xfe8bffff 64bit] pci 0000:02:00.0: reg 30: [mem 0xfe840000-0xfe87ffff pref] pci 0000:02:00.0: supports D1 D2 pci 0000:00:06.0: PCI bridge to [bus 02-02] pci 0000:00:06.0: bridge window [io 0xc000-0xcfff] pci 0000:00:06.0: bridge window [mem 0xfe800000-0xfe8fffff] pci 0000:00:06.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:00:1c.0: PCI bridge to [bus 05-05] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) pci 0000:00:1c.0: bridge window [mem 0xfaf00000-0xfaffffff 64bit pref] pci 0000:04:00.0: [11ab:4364] type 0 class 0x000200 pci 0000:04:00.0: reg 10: [mem 0xfeafc000-0xfeafffff 64bit] pci 0000:04:00.0: reg 18: [io 0xd800-0xd8ff] pci 0000:04:00.0: reg 30: [mem 0xfeac0000-0xfeadffff pref] pci 0000:04:00.0: supports D1 D2 pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:04:00.0: PME# disabled pci 0000:00:1c.2: PCI bridge to [bus 04-04] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff] pci 0000:00:1c.2: bridge window [mem 0xfea00000-0xfeafffff] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:03:00.0: [1033:0194] type 0 class 0x000c03 pci 0000:03:00.0: reg 10: [mem 0xfe9fe000-0xfe9fffff 64bit] pci 0000:03:00.0: PME# supported from D0 D3hot pci 0000:03:00.0: PME# disabled pci 0000:00:1c.3: PCI bridge to [bus 03-03] pci 0000:00:1c.3: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:1c.3: bridge window [mem 0xfe900000-0xfe9fffff] pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:06:03.0: [1106:3044] type 0 class 0x000c00 pci 0000:06:03.0: reg 10: [mem 0xfebff800-0xfebfffff] pci 0000:06:03.0: reg 14: [io 0xec00-0xec7f] pci 0000:06:03.0: supports D2 pci 0000:06:03.0: PME# supported from D2 D3hot D3cold pci 0000:06:03.0: PME# disabled pci 0000:00:1e.0: PCI bridge to [bus 06-06] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0xe000-0xefff] pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xffffffff] (subtractive decode) pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 7 10 11 12 14 15) HEST: Table is not found! vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes reserve RAM buffer: 000000000009e000 - 000000000009ffff reserve RAM buffer: 00000000cff80000 - 00000000cfffffff NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default HPET: 4 timers in total, 0 timers will be used for per-cpu timer hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 hpet0: 4 comparators, 64-bit 14.318180 MHz counter Switching to clocksource tsc pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:00: [bus 00-ff] pnp 00:00: [io 0x0cf8-0x0cff] pnp 00:00: [io 0x0000-0x0cf7 window] pnp 00:00: [io 0x0d00-0xffff window] pnp 00:00: [mem 0x000a0000-0x000bffff window] pnp 00:00: [mem 0x000d0000-0x000dffff window] pnp 00:00: [mem 0xd0000000-0xffffffff window] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) pnp 00:01: [mem 0xfed14000-0xfed19fff] pnp 00:01: Plug and Play ACPI device, IDs PNP0c01 (active) pnp 00:02: [dma 4] pnp 00:02: [io 0x0000-0x000f] pnp 00:02: [io 0x0081-0x0083] pnp 00:02: [io 0x0087] pnp 00:02: [io 0x0089-0x008b] pnp 00:02: [io 0x008f] pnp 00:02: [io 0x00c0-0x00df] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) pnp 00:03: [io 0x0070-0x0071] pnp 00:03: [irq 8] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) pnp 00:04: [io 0x0061] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) pnp 00:05: [io 0x00f0-0x00ff] pnp 00:05: [irq 13] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) pnp 00:06: [io 0x0000-0xffffffffffffffff disabled] pnp 00:06: [io 0x0000-0xffffffffffffffff disabled] pnp 00:06: [io 0x0290-0x0297] pnp 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:07: [io 0x0010-0x001f] pnp 00:07: [io 0x0022-0x003f] pnp 00:07: [io 0x0044-0x004d] pnp 00:07: [io 0x0050-0x005f] pnp 00:07: [io 0x0062-0x0063] pnp 00:07: [io 0x0065-0x006f] pnp 00:07: [io 0x0072-0x007f] pnp 00:07: [io 0x0080] pnp 00:07: [io 0x0084-0x0086] pnp 00:07: [io 0x0088] pnp 00:07: [io 0x008c-0x008e] pnp 00:07: [io 0x0090-0x009f] pnp 00:07: [io 0x00a2-0x00bf] pnp 00:07: [io 0x00e0-0x00ef] pnp 00:07: [io 0x04d0-0x04d1] pnp 00:07: [io 0x0800-0x087f] pnp 00:07: [io 0x0400-0x03ff disabled] pnp 00:07: [io 0x0480-0x04bf] pnp 00:07: [mem 0xfed1c000-0xfed1ffff] pnp 00:07: [mem 0xfed20000-0xfed3ffff] pnp 00:07: [mem 0xfed50000-0xfed8ffff] pnp 00:07: [mem 0xffa00000-0xffafffff] pnp 00:07: [mem 0xffb00000-0xffbfffff] pnp 00:07: [mem 0xffe00000-0xffefffff] pnp 00:07: [mem 0xfff00000-0xfffffffe] pnp 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:08: [mem 0xfed00000-0xfed003ff] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active) pnp 00:09: [mem 0xffa00000-0xffbfffff] pnp 00:09: [mem 0xffe00000-0xffffffff] pnp 00:09: Plug and Play ACPI device, IDs INT0800 (active) pnp 00:0a: [mem 0xffc00000-0xffdfffff] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:0b: [mem 0xfec00000-0xfec00fff] pnp 00:0b: [mem 0xfee00000-0xfee00fff] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:0c: [io 0x0060] pnp 00:0c: [io 0x0064] pnp 00:0c: [irq 1] pnp 00:0c: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) pnp 00:0d: [mem 0xe0000000-0xefffffff] pnp 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:0e: [mem 0x00000000-0x0009ffff] pnp 00:0e: [mem 0x000c0000-0x000cffff] pnp 00:0e: [mem 0x000e0000-0x000fffff] pnp 00:0e: [mem 0x00100000-0xcfffffff] pnp 00:0e: [mem 0x00000000-0xffffffffffffffff disabled] pnp 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active) pnp: PnP ACPI: found 15 devices ACPI: ACPI bus type pnp unregistered system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved system 00:06: [io 0x0290-0x0297] has been reserved system 00:07: [io 0x04d0-0x04d1] has been reserved system 00:07: [io 0x0800-0x087f] has been reserved system 00:07: [io 0x0480-0x04bf] has been reserved system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved system 00:07: [mem 0xfed50000-0xfed8ffff] has been reserved system 00:07: [mem 0xffa00000-0xffafffff] has been reserved system 00:07: [mem 0xffb00000-0xffbfffff] has been reserved system 00:07: [mem 0xffe00000-0xffefffff] has been reserved system 00:07: [mem 0xfff00000-0xfffffffe] has been reserved system 00:0a: [mem 0xffc00000-0xffdfffff] has been reserved system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved system 00:0e: [mem 0x000c0000-0x000cffff] has been reserved system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved system 00:0e: [mem 0x00100000-0xcfffffff] could not be reserved pci 0000:00:1c.0: BAR 14: assigned [mem 0xd0000000-0xd03fffff] pci 0000:00:1c.2: BAR 15: assigned [mem 0xd0400000-0xd05fffff 64bit pref] pci 0000:00:1c.3: BAR 15: assigned [mem 0xd0600000-0xd07fffff 64bit pref] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff] pci 0000:00:1c.3: BAR 13: assigned [io 0x2000-0x2fff] pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff] pci 0000:00:01.0: bridge window [mem 0xfc000000-0xfe7fffff] pci 0000:00:01.0: bridge window [mem 0xd4000000-0xdfffffff 64bit pref] pci 0000:00:06.0: PCI bridge to [bus 02-02] pci 0000:00:06.0: bridge window [io 0xc000-0xcfff] pci 0000:00:06.0: bridge window [mem 0xfe800000-0xfe8fffff] pci 0000:00:06.0: bridge window [mem pref disabled] pci 0000:00:1c.0: PCI bridge to [bus 05-05] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd03fffff] pci 0000:00:1c.0: bridge window [mem 0xfaf00000-0xfaffffff 64bit pref] pci 0000:00:1c.2: PCI bridge to [bus 04-04] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff] pci 0000:00:1c.2: bridge window [mem 0xfea00000-0xfeafffff] pci 0000:00:1c.2: bridge window [mem 0xd0400000-0xd05fffff 64bit pref] pci 0000:00:1c.3: PCI bridge to [bus 03-03] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] pci 0000:00:1c.3: bridge window [mem 0xfe900000-0xfe9fffff] pci 0000:00:1c.3: bridge window [mem 0xd0600000-0xd07fffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06-06] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff] pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff] pci 0000:00:1e.0: bridge window [mem pref disabled] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:01.0: setting latency timer to 64 pci 0000:00:06.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:06.0: setting latency timer to 64 pci 0000:00:1c.0: enabling device (0106 -> 0107) pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:1c.2: setting latency timer to 64 pci 0000:00:1c.3: enabling device (0106 -> 0107) pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 pci 0000:00:1c.3: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xffffffff] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfe7fffff] pci_bus 0000:01: resource 2 [mem 0xd4000000-0xdfffffff 64bit pref] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff] pci_bus 0000:02: resource 1 [mem 0xfe800000-0xfe8fffff] pci_bus 0000:05: resource 0 [io 0x1000-0x1fff] pci_bus 0000:05: resource 1 [mem 0xd0000000-0xd03fffff] pci_bus 0000:05: resource 2 [mem 0xfaf00000-0xfaffffff 64bit pref] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff] pci_bus 0000:04: resource 1 [mem 0xfea00000-0xfeafffff] pci_bus 0000:04: resource 2 [mem 0xd0400000-0xd05fffff 64bit pref] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff] pci_bus 0000:03: resource 1 [mem 0xfe900000-0xfe9fffff] pci_bus 0000:03: resource 2 [mem 0xd0600000-0xd07fffff 64bit pref] pci_bus 0000:06: resource 0 [io 0xe000-0xefff] pci_bus 0000:06: resource 1 [mem 0xfeb00000-0xfebfffff] pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:06: resource 5 [io 0x0d00-0xffff] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:06: resource 7 [mem 0x000d0000-0x000dffff] pci_bus 0000:06: resource 8 [mem 0xd0000000-0xffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered UDP hash table entries: 4096 (order: 5, 131072 bytes) UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) NET: Registered protocol family 1 pci 0000:01:00.0: Boot video device PCI: CLS 32 bytes, default 64 Unpacking initramfs... Freeing initrd memory: 1764k freed PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing 64MB software IO TLB between ffff8800cb000000 - ffff8800cf000000 software IO TLB at phys 0xcb000000 - 0xcf000000 Scanning for low memory corruption every 60 seconds audit: initializing netlink socket (disabled) type=2000 audit(1296655982.503:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 15984 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) intel_idle: MWAIT substates: 0x22220 intel_idle: does not run on family 6 model 23 ERST: Table is not found! Linux agpgart interface v0.103 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice rtc_cmos 00:03: RTC can wake from S4 rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs cpuidle: using governor ladder cpuidle: using governor menu TCP cubic registered NET: Registered protocol family 17 Registering the dns_resolver key type PM: Hibernation image not present or could not be loaded. registered taskstats version 1 rtc_cmos 00:03: setting system clock to 2011-02-02 14:13:03 UTC (1296655983) Initalizing network drop monitor service Freeing unused kernel memory: 512k freed udev[47]: starting version 165 SCSI subsystem initialized megasas: 00.00.04.31-rc1 Mon. May 3, 11:41:51 PST 2010 megasas: 0x1000:0x0079:0x1000:0x9263: bus 2:slot 0:func 0 megaraid_sas 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 megaraid_sas 0000:02:00.0: setting latency timer to 64 megasas: FW now in Ready state megasas_init_mfi: fw_support_ieee=0 scsi0 : LSI SAS based MegaRAID driver scsi 0:0:8:0: Direct-Access ATA WDC WD7501AALS-0 0K05 PQ: 0 ANSI: 5 scsi 0:0:9:0: Direct-Access ATA WDC WD7501AALS-0 0K05 PQ: 0 ANSI: 5 scsi 0:0:10:0: Direct-Access ATA WDC WD7501AALS-0 0K05 PQ: 0 ANSI: 5 scsi 0:0:11:0: Direct-Access ATA WDC WD7501AALS-0 0K05 PQ: 0 ANSI: 5 scsi 0:0:12:0: Direct-Access ATA WDC WD7501AALS-0 0K05 PQ: 0 ANSI: 5 scsi 0:0:13:0: Direct-Access ATA WDC WD7501AALS-0 0K05 PQ: 0 ANSI: 5 scsi 0:2:0:0: Direct-Access LSI MR9261-8i 2.0. PQ: 0 ANSI: 5 scsi 0:2:1:0: Direct-Access LSI MR9261-8i 2.0. PQ: 0 ANSI: 5 sd 0:2:0:0: [sda] 4292819456 512-byte logical blocks: (2.19 TB/1.99 TiB) sd 0:2:0:0: [sda] Write Protect is off sd 0:2:0:0: [sda] Mode Sense: 1f 00 00 08 sd 0:2:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sd 0:2:0:0: [sda] Attached SCSI disk sd 0:2:1:0: [sdb] 1558742528 512-byte logical blocks: (798 GB/743 GiB) sd 0:2:1:0: [sdb] Write Protect is off sd 0:2:1:0: [sdb] Mode Sense: 1f 00 00 08 sd 0:2:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sd 0:2:1:0: [sdb] Attached SCSI disk libata version 3.00 loaded. ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: PCI INT B -> GSI 22 (level, low) -> IRQ 22 ahci 0000:00:1f.2: irq 40 for MSI/MSI-X ahci 0000:00:1f.2: controller can't do SNTF, turning off CAP_SNTF ahci: SSS flag set, parallel bus scan disabled ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl RAID mode ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pmp pio slum part ccc ems sxs ahci 0000:00:1f.2: setting latency timer to 64 scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci scsi6 : ahci ata1: SATA max UDMA/133 abar m2048@0xfbffe800 port 0xfbffe900 irq 40 ata2: SATA max UDMA/133 abar m2048@0xfbffe800 port 0xfbffe980 irq 40 ata3: SATA max UDMA/133 abar m2048@0xfbffe800 port 0xfbffea00 irq 40 ata4: SATA max UDMA/133 abar m2048@0xfbffe800 port 0xfbffea80 irq 40 ata5: SATA max UDMA/133 abar m2048@0xfbffe800 port 0xfbffeb00 irq 40 ata6: SATA max UDMA/133 abar m2048@0xfbffe800 port 0xfbffeb80 irq 40 ata1: SATA link down (SStatus 0 SControl 300) ata2: SATA link down (SStatus 0 SControl 300) ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata3.00: ATAPI: ATAPI iHBS212 2, 5L06, max UDMA/100 ata3.00: configured for UDMA/100 scsi 3:0:0:0: CD-ROM ATAPI iHBS212 2 5L06 PQ: 0 ANSI: 5 ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata4.00: ATAPI: ASUS DRW-2014L1T, 1.02, max UDMA/66 ata4.00: configured for UDMA/66 scsi 4:0:0:0: CD-ROM ASUS DRW-2014L1T 1.02 PQ: 0 ANSI: 5 ata5: SATA link down (SStatus 0 SControl 300) ata6: SATA link down (SStatus 0 SControl 300) sr0: scsi3-mmc drive: 204x/204x writer dvd-ram cd/rw xa/form2 cdda tray cdrom: Uniform CD-ROM driver Revision: 3.20 sr 3:0:0:0: Attached scsi CD-ROM sr0 sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray sr 4:0:0:0: Attached scsi CD-ROM sr1 EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) udev[601]: starting version 165 ACPI: acpi_idle registered with cpuidle EDAC MC: Ver: 2.1.0 Jan 29 2011 EDAC MC0: Giving out device to 'x38_edac' 'x38': DEV 0000:00:00.0 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 input: PC Speaker as /devices/platform/pcspkr/input/input0 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 ACPI: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 ACPI: Power Button [PWRF] sd 0:2:0:0: Attached scsi generic sg0 type 0 sd 0:2:1:0: Attached scsi generic sg1 type 0 sr 3:0:0:0: Attached scsi generic sg2 type 5 sr 4:0:0:0: Attached scsi generic sg3 type 5 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 iTCO_vendor_support: vendor-support=0 ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfbfffc00 uhci_hcd: USB Universal Host Controller Interface driver xhci_hcd 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 xhci_hcd 0000:03:00.0: setting latency timer to 64 xhci_hcd 0000:03:00.0: xHCI Host Controller xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 3 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06 iTCO_wdt: Found a ICH9R TCO device (Version=2, TCOBASE=0x0860) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) sky2: driver version 1.28 sky2 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 sky2 0000:04:00.0: setting latency timer to 64 sky2 0000:04:00.0: Yukon-2 EC Ultra chip revision 3 sky2 0000:04:00.0: irq 41 for MSI/MSI-X sky2 0000:04:00.0: eth0: addr 00:1d:60:eb:c4:5b ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfbfff800 firewire_ohci 0000:06:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 hub 3-0:1.0: USB hub found hub 3-0:1.0: 6 ports detected i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ACPI: resource 0000:00:1f.3 [io 0x0400-0x041f] conflicts with ACPI region SMRG [io 0x0400-0x040f pref window] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000a800 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000a880 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1a.2: setting latency timer to 64 uhci_hcd 0000:00:1a.2: UHCI Host Controller uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 6 firewire_ohci: Added fw-ohci device 0000:06:03.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x11 uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000ac00 hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 7 xhci_hcd 0000:03:00.0: irq 19, io mem 0xfe9fe000 xhci_hcd 0000:03:00.0: irq 42 for MSI/MSI-X xhci_hcd 0000:03:00.0: irq 43 for MSI/MSI-X xhci_hcd 0000:03:00.0: irq 44 for MSI/MSI-X xhci_hcd 0000:03:00.0: irq 45 for MSI/MSI-X xhci_hcd 0000:03:00.0: irq 46 for MSI/MSI-X usb usb2: No SuperSpeed endpoint companion for config 1 interface 0 altsetting 0 ep 129: using minimum values xHCI xhci_add_endpoint called for root hub xHCI xhci_check_bandwidth called for root hub hub 2-0:1.0: USB hub found hub 2-0:1.0: 4 ports detected uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000a080 hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 8 uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000a400 hub 8-0:1.0: USB hub found hub 8-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 9 uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000a480 hub 9-0:1.0: USB hub found hub 9-0:1.0: 2 ports detected HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 HDA Intel 0000:00:1b.0: irq 47 for MSI/MSI-X HDA Intel 0000:00:1b.0: setting latency timer to 64 usb 1-2: new high speed USB device using ehci_hcd and address 2 nvidia: module license 'NVIDIA' taints kernel. Disabling lock debugging due to kernel taint firewire_core: created device fw0: GUID 0011d800018fe5f2, S400 usb 3-6: new high speed USB device using ehci_hcd and address 3 hub 3-6:1.0: USB hub found hub 3-6:1.0: 4 ports detected usb 2-1: new SuperSpeed USB device using xhci_hcd and address 2 input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input3 HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 hda_intel: Disable MSI for Nvidia chipset HDA Intel 0000:01:00.1: setting latency timer to 64 xhci_hcd 0000:03:00.0: WARN: short transfer on control ep xhci_hcd 0000:03:00.0: WARN: short transfer on control ep xhci_hcd 0000:03:00.0: WARN: short transfer on control ep usb 2-1: ep 0x81 - rounding interval to 32768 microframes xhci_hcd 0000:03:00.0: WARN no SS endpoint bMaxBurst hub 2-1:1.0: USB hub found xhci_hcd 0000:03:00.0: WARN: Stalled endpoint xhci_hcd 0000:03:00.0: WARN: Stalled endpoint xhci_hcd 0000:03:00.0: WARN: Stalled endpoint hub 2-1:1.0: config failed, can't read hub descriptor (err -22) usb 2-3: new high speed USB device using xhci_hcd and address 3 xhci_hcd 0000:03:00.0: WARN: short transfer on control ep xhci_hcd 0000:03:00.0: WARN: short transfer on control ep usb 2-3: ep 0x81 - rounding interval to 2048 microframes hub 2-3:1.0: USB hub found xhci_hcd 0000:03:00.0: WARN: short transfer on control ep hub 2-3:1.0: 4 ports detected nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 nvidia 0000:01:00.0: setting latency timer to 64 vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem NVRM: loading NVIDIA UNIX x86_64 Kernel Module 260.19.36 Tue Jan 18 16:56:11 PST 2011 usb 9-1: new full speed USB device using uhci_hcd and address 2 hub 9-1:1.0: USB hub found hub 9-1:1.0: 3 ports detected usb 3-6.1: new high speed USB device using ehci_hcd and address 4 hub 3-6.1:1.0: USB hub found hub 3-6.1:1.0: 4 ports detected usb 9-1.1: new full speed USB device using uhci_hcd and address 3 usb 9-1.2: new low speed USB device using uhci_hcd and address 4 input: Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 ) as /devices/pci0000:00/0000:00:1d.2/usb9/9-1/9-1.1/9-1.1:1.0/input/input4 generic-usb 0003:04B3:301B.0001: input,hidraw0: USB HID v1.10 Keyboard [Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 )] on usb-0000:00:1d.2-1.1/input0 input: Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 ) as /devices/pci0000:00/0000:00:1d.2/usb9/9-1/9-1.1/9-1.1:1.1/input/input5 generic-usb 0003:04B3:301B.0002: input,hidraw1: USB HID v1.10 Device [Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 )] on usb-0000:00:1d.2-1.1/input1 usbcore: registered new interface driver usbhid usbhid: USB HID core driver input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb9/9-1/9-1.2/9-1.2:1.0/input/input6 generic-usb 0003:046D:C043.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.2-1.2/input0 EXT4-fs (sda2): re-mounted. Opts: (null) EXT4-fs (sda2): re-mounted. Opts: (null) EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) Adding 7671032k swap on /dev/sda3. Priority:-1 extents:1 across:7671032k sky2 0000:04:00.0: eth0: enabling interface sky2 0000:04:00.0: eth0: Link is up at 1000 Mbps, full duplex, flow control both start_kdeinit (1592): /proc/1592/oom_adj is deprecated, please use /proc/1592/oom_score_adj instead. NET: Registered protocol family 10 lo: Disabled Privacy Extensions eth0: no IPv6 routers present usb 2-3.3: new high speed USB device using xhci_hcd and address 4 xhci_hcd 0000:03:00.0: WARN: short transfer on control ep xhci_hcd 0000:03:00.0: WARN: short transfer on control ep xhci_hcd 0000:03:00.0: WARN: short transfer on control ep xhci_hcd 0000:03:00.0: WARN: short transfer on control ep usb 2-3.3: selecting invalid altsetting 1 usbcore: registered new interface driver uas Initializing USB Mass Storage driver... scsi7 : usb-storage 2-3.3:1.0 usbcore: registered new interface driver usb-storage USB Mass Storage support registered. scsi 7:0:0:0: Direct-Access FLASH Drive SM_USB20 3000 PQ: 0 ANSI: 0 CCS sd 7:0:0:0: Attached scsi generic sg4 type 0 sd 7:0:0:0: [sdc] 15826944 512-byte logical blocks: (8.10 GB/7.54 GiB) sd 7:0:0:0: [sdc] Write Protect is off sd 7:0:0:0: [sdc] Mode Sense: 43 00 00 00 sd 7:0:0:0: [sdc] Assuming drive cache: write through sd 7:0:0:0: [sdc] Assuming drive cache: write through sdc: sdc1 sd 7:0:0:0: [sdc] Assuming drive cache: write through sd 7:0:0:0: [sdc] Attached SCSI removable disk usb 2-3.3: USB disconnect, address 4 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
