musb core doesn't need to know about platform
specific details. So start moving clock
handling to platform glue layer and make
musb core agnostic about that.
Signed-off-by: Felipe Balbi <balbi@xxxxxx>
---
arch/arm/mach-omap2/clock2430_data.c | 2 +-
arch/arm/mach-omap2/clock3xxx_data.c | 8 ++--
arch/arm/mach-omap2/clock44xx_data.c | 2 +-
drivers/usb/musb/am35x.c | 91 +++++++++++++++++++++-------------
drivers/usb/musb/da8xx.c | 38 +++++++++++---
drivers/usb/musb/davinci.c | 36 ++++++++++---
drivers/usb/musb/musb_core.c | 36 -------------
drivers/usb/musb/musb_core.h | 2 -
drivers/usb/musb/omap2430.c | 46 ++++++++++-------
drivers/usb/musb/tusb6010.c | 15 ------
10 files changed, 146 insertions(+), 130 deletions(-)
diff --git a/arch/arm/mach-omap2/clock2430_data.c b/arch/arm/mach-omap2/clock2430_data.c
index a6bccd7..a9c60b7 100644
--- a/arch/arm/mach-omap2/clock2430_data.c
+++ b/arch/arm/mach-omap2/clock2430_data.c
@@ -1983,7 +1983,7 @@ static struct omap_clk omap2430_clks[] = {
CLK("omap-aes", "ick", &aes_ick, CK_243X),
CLK(NULL, "pka_ick", &pka_ick, CK_243X),
CLK(NULL, "usb_fck", &usb_fck, CK_243X),
- CLK("musb-hdrc", "ick", &usbhs_ick, CK_243X),
+ CLK("musb-omap2430", "ick", &usbhs_ick, CK_243X),
CLK("mmci-omap-hs.0", "ick", &mmchs1_ick, CK_243X),
CLK("mmci-omap-hs.0", "fck", &mmchs1_fck, CK_243X),
CLK("mmci-omap-hs.1", "ick", &mmchs2_ick, CK_243X),
diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c
index 3e668ed..0579604 100644
--- a/arch/arm/mach-omap2/clock3xxx_data.c
+++ b/arch/arm/mach-omap2/clock3xxx_data.c
@@ -3306,8 +3306,8 @@ static struct omap_clk omap3xxx_clks[] = {
CLK(NULL, "ssi_sst_fck", &ssi_sst_fck_3430es1, CK_3430ES1),
CLK(NULL, "ssi_sst_fck", &ssi_sst_fck_3430es2, CK_3430ES2),
CLK(NULL, "core_l3_ick", &core_l3_ick, CK_3XXX),
- CLK("musb-hdrc", "ick", &hsotgusb_ick_3430es1, CK_3430ES1),
- CLK("musb-hdrc", "ick", &hsotgusb_ick_3430es2, CK_3430ES2),
+ CLK("musb-omap2430", "ick", &hsotgusb_ick_3430es1, CK_3430ES1),
+ CLK("musb-omap2430", "ick", &hsotgusb_ick_3430es2, CK_3430ES2),
CLK(NULL, "sdrc_ick", &sdrc_ick, CK_3XXX),
CLK(NULL, "gpmc_fck", &gpmc_fck, CK_3XXX),
CLK(NULL, "security_l3_ick", &security_l3_ick, CK_343X),
@@ -3442,8 +3442,8 @@ static struct omap_clk omap3xxx_clks[] = {
CLK("davinci_emac", "phy_clk", &emac_fck, CK_AM35XX),
CLK("vpfe-capture", "master", &vpfe_ick, CK_AM35XX),
CLK("vpfe-capture", "slave", &vpfe_fck, CK_AM35XX),
- CLK("musb-hdrc", "ick", &hsotgusb_ick_am35xx, CK_AM35XX),
- CLK("musb-hdrc", "fck", &hsotgusb_fck_am35xx, CK_AM35XX),
+ CLK("musb-am35x", "ick", &hsotgusb_ick_am35xx, CK_AM35XX),
+ CLK("musb-am35x", "fck", &hsotgusb_fck_am35xx, CK_AM35XX),
CLK(NULL, "hecc_ck", &hecc_ck, CK_AM35XX),
CLK(NULL, "uart4_ick", &uart4_ick_am35xx, CK_AM35XX),
};
diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c
index 95dd34c..bfcd19f 100644
--- a/arch/arm/mach-omap2/clock44xx_data.c
+++ b/arch/arm/mach-omap2/clock44xx_data.c
@@ -2953,7 +2953,7 @@ static struct omap_clk omap44xx_clks[] = {
CLK("ehci-omap.0", "usbhost_ick", &dummy_ck, CK_443X),
CLK(NULL, "otg_60m_gfclk", &otg_60m_gfclk, CK_443X),
CLK(NULL, "usb_otg_hs_xclk", &usb_otg_hs_xclk, CK_443X),
- CLK("musb-hdrc", "ick", &usb_otg_hs_ick, CK_443X),
+ CLK("musb-omap2430", "ick", &usb_otg_hs_ick, CK_443X),
CLK(NULL, "usb_phy_cm_clk32k", &usb_phy_cm_clk32k, CK_443X),
CLK(NULL, "usb_tll_hs_usb_ch2_clk", &usb_tll_hs_usb_ch2_clk, CK_443X),
CLK(NULL, "usb_tll_hs_usb_ch0_clk", &usb_tll_hs_usb_ch0_clk, CK_443X),
diff --git a/drivers/usb/musb/am35x.c b/drivers/usb/musb/am35x.c
index e372c87..e4e571b 100644
--- a/drivers/usb/musb/am35x.c
+++ b/drivers/usb/musb/am35x.c
@@ -85,6 +85,8 @@
struct am35x_glue {
struct device *dev;
struct platform_device *musb;
+ struct clk *phy_clk;
+ struct clk *clk;
};
static inline void phy_on(void)
@@ -402,34 +404,18 @@ static int am35x_musb_init(struct musb *musb)
{
void __iomem *reg_base = musb->ctrl_base;
u32 rev, lvl_intr, sw_reset;
- int status;
musb->mregs += USB_MENTOR_CORE_OFFSET;
- clk_enable(musb->clock);
- DBG(2, "musb->clock=%lud\n", clk_get_rate(musb->clock));
-
- musb->phy_clock = clk_get(musb->controller, "fck");
- if (IS_ERR(musb->phy_clock)) {
- status = PTR_ERR(musb->phy_clock);
- goto exit0;
- }
- clk_enable(musb->phy_clock);
- DBG(2, "musb->phy_clock=%lud\n", clk_get_rate(musb->phy_clock));
-
/* Returns zero if e.g. not clocked */
rev = musb_readl(reg_base, USB_REVISION_REG);
- if (!rev) {
- status = -ENODEV;
- goto exit1;
- }
+ if (!rev)
+ return -ENODEV;
usb_nop_xceiv_register();
musb->xceiv = otg_get_transceiver();
- if (!musb->xceiv) {
- status = -ENODEV;
- goto exit1;
- }
+ if (!musb->xceiv)
+ return -ENODEV;
if (is_host_enabled(musb))
setup_timer(&otg_workaround, otg_timer, (unsigned long) musb);
@@ -459,13 +445,8 @@ static int am35x_musb_init(struct musb *musb)
lvl_intr = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
lvl_intr |= AM35XX_USBOTGSS_INT_CLR;
omap_ctrl_writel(lvl_intr, AM35XX_CONTROL_LVL_INTR_CLEAR);
+
return 0;
-exit1:
- clk_disable(musb->phy_clock);
- clk_put(musb->phy_clock);
-exit0:
- clk_disable(musb->clock);
- return status;
}
static int am35x_musb_exit(struct musb *musb)
@@ -478,11 +459,6 @@ static int am35x_musb_exit(struct musb *musb)
otg_put_transceiver(musb->xceiv);
usb_nop_xceiv_unregister();
- clk_disable(musb->clock);
-
- clk_disable(musb->phy_clock);
- clk_put(musb->phy_clock);
-
return 0;
}
@@ -551,6 +527,9 @@ static int __init am35x_probe(struct platform_device *pdev)
struct platform_device *musb;
struct am35x_glue *glue;
+ struct clk *phy_clk;
+ struct clk *clk;
+
int ret = -ENOMEM;
glue = kzalloc(sizeof(*glue), GFP_KERNEL);
@@ -565,12 +544,40 @@ static int __init am35x_probe(struct platform_device *pdev)
goto err1;
}
+ phy_clk = clk_get(&pdev->dev, "fck");
+ if (IS_ERR(phy_clk)) {
+ dev_err(&pdev->dev, "failed to get PHY clock\n");
+ ret = PTR_ERR(phy_clk);
+ goto err2;
+ }
+
+ clk = clk_get(&pdev->dev, "ick");
+ if (IS_ERR(clk)) {
+ dev_err(&pdev->dev, "failed to get clock\n");
+ ret = PTR_ERR(clk);
+ goto err3;
+ }
+
+ ret = clk_enable(phy_clk);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to enable PHY clock\n");
+ goto err4;
+ }
+
+ ret = clk_enable(clk);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to enable clock\n");
+ goto err5;
+ }
+
musb->dev.parent = &pdev->dev;
musb->dev.dma_mask = &am35x_dmamask;
musb->dev.coherent_dma_mask = am35x_dmamask;
glue->dev = &pdev->dev;
glue->musb = musb;
+ glue->phy_clk = phy_clk;
+ glue->clk = clk;
pdata->platform_ops = &am35x_ops;
@@ -580,23 +587,35 @@ static int __init am35x_probe(struct platform_device *pdev)
pdev->num_resources);
if (ret) {
dev_err(&pdev->dev, "failed to add resources\n");
- goto err2;
+ goto err6;
}
ret = platform_device_add_data(musb, pdata, sizeof(*pdata));
if (ret) {
dev_err(&pdev->dev, "failed to add platform_data\n");
- goto err2;
+ goto err6;
}
ret = platform_device_add(musb);
if (ret) {
dev_err(&pdev->dev, "failed to register musb device\n");
- goto err2;
+ goto err6;
}
return 0;
+err6:
+ clk_disable(clk);
+
+err5:
+ clk_disable(phy_clk);
+
+err4:
+ clk_put(clk);
+
+err3:
+ clk_put(phy_clk);
+
err2:
platform_device_put(musb);
@@ -613,6 +632,10 @@ static int __exit am35x_remove(struct platform_device *pdev)
platform_device_del(glue->musb);
platform_device_put(glue->musb);
+ clk_disable(glue->clk);
+ clk_disable(glue->phy_clk);
+ clk_put(glue->clk);
+ clk_put(glue->phy_clk);
kfree(glue);
return 0;
diff --git a/drivers/usb/musb/da8xx.c b/drivers/usb/musb/da8xx.c
index 1dd6e35..27199d4 100644
--- a/drivers/usb/musb/da8xx.c
+++ b/drivers/usb/musb/da8xx.c
@@ -83,6 +83,7 @@
struct da8xx_glue {
struct device *dev;
struct platform_device *musb;
+ struct clk *clk;
};
/*
@@ -423,8 +424,6 @@ static int da8xx_musb_init(struct musb *musb)
musb->mregs += DA8XX_MENTOR_CORE_OFFSET;
- clk_enable(musb->clock);
-
/* Returns zero if e.g. not clocked */
rev = musb_readl(reg_base, DA8XX_USB_REVISION_REG);
if (!rev)
@@ -456,7 +455,6 @@ static int da8xx_musb_init(struct musb *musb)
musb->isr = da8xx_musb_interrupt;
return 0;
fail:
- clk_disable(musb->clock);
return -ENODEV;
}
@@ -470,8 +468,6 @@ static int da8xx_musb_exit(struct musb *musb)
otg_put_transceiver(musb->xceiv);
usb_nop_xceiv_unregister();
- clk_disable(musb->clock);
-
return 0;
}
@@ -496,6 +492,8 @@ static int __init da8xx_probe(struct platform_device *pdev)
struct platform_device *musb;
struct da8xx_glue *glue;
+ struct clk *clk;
+
int ret = -ENOMEM;
glue = kzalloc(sizeof(*glue), GFP_KERNEL);
@@ -510,12 +508,26 @@ static int __init da8xx_probe(struct platform_device *pdev)
goto err1;
}
+ clk = clk_get(&pdev->dev, "usb20");
+ if (IS_ERR(clk)) {
+ dev_err(&pdev->dev, "failed to get clock\n");
+ ret = PTR_ERR(clk);
+ goto err2;
+ }
+
+ ret = clk_enable(clk);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to enable clock\n");
+ goto err3;
+ }
+
musb->dev.parent = &pdev->dev;
musb->dev.dma_mask = &da8xx_dmamask;
musb->dev.coherent_dma_mask = da8xx_dmamask;
glue->dev = &pdev->dev;
glue->musb = musb;
+ glue->clk = clk;
pdata->platform_ops = &da8xx_ops;
@@ -525,23 +537,29 @@ static int __init da8xx_probe(struct platform_device *pdev)
pdev->num_resources);
if (ret) {
dev_err(&pdev->dev, "failed to add resources\n");
- goto err2;
+ goto err4;
}
ret = platform_device_add_data(musb, pdata, sizeof(*pdata));
if (ret) {
dev_err(&pdev->dev, "failed to add platform_data\n");
- goto err2;
+ goto err4;
}
ret = platform_device_add(musb);
if (ret) {
dev_err(&pdev->dev, "failed to register musb device\n");
- goto err2;
+ goto err4;
}
return 0;
+err4:
+ clk_disable(clk);
+
+err3:
+ clk_put(clk);
+
err2:
platform_device_put(musb);
@@ -556,8 +574,10 @@ static int __exit da8xx_remove(struct platform_device *pdev)
{
struct da8xx_glue *glue = platform_get_drvdata(pdev);
- platform_device_del(glue->musb);
platform_device_put(glue->musb);
+ platform_device_del(glue->musb);
+ clk_disable(glue->clk);
+ clk_put(glue->clk);
kfree(glue);
return 0;
diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c
index 831a04d..de67480 100644
--- a/drivers/usb/musb/davinci.c
+++ b/drivers/usb/musb/davinci.c
@@ -56,6 +56,7 @@
struct davinci_glue {
struct device *dev;
struct platform_device *musb;
+ struct clk *clk;
};
/* REVISIT (PM) we should be able to keep the PHY in low power mode most
@@ -395,8 +396,6 @@ static int davinci_musb_init(struct musb *musb)
musb->mregs += DAVINCI_BASE_OFFSET;
- clk_enable(musb->clock);
-
/* returns zero if e.g. not clocked */
revision = musb_readl(tibase, DAVINCI_USB_VERSION_REG);
if (revision == 0)
@@ -451,8 +450,6 @@ static int davinci_musb_init(struct musb *musb)
return 0;
fail:
- clk_disable(musb->clock);
-
otg_put_transceiver(musb->xceiv);
usb_nop_xceiv_unregister();
return -ENODEV;
@@ -502,8 +499,6 @@ static int davinci_musb_exit(struct musb *musb)
phy_off();
- clk_disable(musb->clock);
-
otg_put_transceiver(musb->xceiv);
usb_nop_xceiv_unregister();
@@ -529,6 +524,7 @@ static int __init davinci_probe(struct platform_device *pdev)
struct musb_hdrc_platform_data *pdata = pdev->dev.platform_data;
struct platform_device *musb;
struct davinci_glue *glue;
+ struct clk *clk;
int ret = -ENOMEM;
@@ -544,12 +540,26 @@ static int __init davinci_probe(struct platform_device *pdev)
goto err1;
}
+ clk = clk_get(&pdev->dev, "usb");
+ if (IS_ERR(clk)) {
+ dev_err(&pdev->dev, "failed to get clock\n");
+ ret = PTR_ERR(clk);
+ goto err2;
+ }
+
+ ret = clk_enable(clk);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to enable clock\n");
+ goto err3;
+ }
+
musb->dev.parent = &pdev->dev;
musb->dev.dma_mask = &davinci_dmamask;
musb->dev.coherent_dma_mask = davinci_dmamask;
glue->dev = &pdev->dev;
glue->musb = musb;
+ glue->clk = clk;
pdata->platform_ops = &davinci_ops;
@@ -559,23 +569,29 @@ static int __init davinci_probe(struct platform_device *pdev)
pdev->num_resources);
if (ret) {
dev_err(&pdev->dev, "failed to add resources\n");
- goto err2;
+ goto err4;
}
ret = platform_device_add_data(musb, pdata, sizeof(*pdata));
if (ret) {
dev_err(&pdev->dev, "failed to add platform_data\n");
- goto err2;
+ goto err4;
}
ret = platform_device_add(musb);
if (ret) {
dev_err(&pdev->dev, "failed to register musb device\n");
- goto err2;
+ goto err4;
}
return 0;
+err4:
+ clk_disable(clk);
+
+err3:
+ clk_put(clk);
+
err2:
platform_device_put(musb);
@@ -592,6 +608,8 @@ static int __exit davinci_remove(struct platform_device *pdev)
platform_device_del(glue->musb);
platform_device_put(glue->musb);
+ clk_disable(glue->clk);
+ clk_put(glue->clk);
kfree(glue);
return 0;
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index dcc77ef..6f7b462 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -1048,8 +1048,6 @@ static void musb_shutdown(struct platform_device *pdev)
spin_lock_irqsave(&musb->lock, flags);
musb_platform_disable(musb);
musb_generic_disable(musb);
- if (musb->clock)
- clk_put(musb->clock);
spin_unlock_irqrestore(&musb->lock, flags);
/* FIXME power down */
@@ -1994,29 +1992,13 @@ bad_config:
spin_lock_init(&musb->lock);
musb->board_mode = plat->mode;
musb->board_set_power = plat->set_power;
- musb->set_clock = plat->set_clock;
musb->min_power = plat->min_power;
musb->ops = plat->platform_ops;
- /* Clock usage is chip-specific ... functional clock (DaVinci,
- * OMAP2430), or PHY ref (some TUSB6010 boards). All this core
- * code does is make sure a clock handle is available; platform
- * code manages it during start/stop and suspend/resume.
- */
- if (plat->clock) {
- musb->clock = clk_get(dev, plat->clock);
- if (IS_ERR(musb->clock)) {
- status = PTR_ERR(musb->clock);
- musb->clock = NULL;
- goto fail1;
- }
- }
-
/* The musb_platform_init() call:
* - adjusts musb->mregs and musb->isr if needed,
* - may initialize an integrated tranceiver
* - initializes musb->xceiv, usually by otg_get_transceiver()
- * - activates clocks.
* - stops powering VBUS
* - assigns musb->board_set_vbus if host mode is enabled
*
@@ -2179,9 +2161,6 @@ fail3:
musb_platform_exit(musb);
fail2:
- if (musb->clock)
- clk_put(musb->clock);
-
fail1:
dev_err(musb->controller,
"musb_init_controller failed with status %d\n", status);
@@ -2410,9 +2389,6 @@ static int musb_suspend(struct device *dev)
unsigned long flags;
struct musb *musb = dev_to_musb(&pdev->dev);
- if (!musb->clock)
- return 0;
-
spin_lock_irqsave(&musb->lock, flags);
if (is_peripheral_active(musb)) {
@@ -2427,10 +2403,6 @@ static int musb_suspend(struct device *dev)
musb_save_context(musb);
- if (musb->set_clock)
- musb->set_clock(musb->clock, 0);
- else
- clk_disable(musb->clock);
spin_unlock_irqrestore(&musb->lock, flags);
return 0;
}
@@ -2440,14 +2412,6 @@ static int musb_resume_noirq(struct device *dev)
struct platform_device *pdev = to_platform_device(dev);
struct musb *musb = dev_to_musb(&pdev->dev);
- if (!musb->clock)
- return 0;
-
- if (musb->set_clock)
- musb->set_clock(musb->clock, 1);
- else
- clk_enable(musb->clock);
-
musb_restore_context(musb);
/* for static cmos like DaVinci, register values were preserved
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index fac1eab..6c8e963 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -384,8 +384,6 @@ struct musb_context_registers {
struct musb {
/* device lock */
spinlock_t lock;
- struct clk *clock;
- struct clk *phy_clock;
const struct musb_platform_ops *ops;
struct musb_context_registers context;
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index 2eea170..fa3154b 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -40,6 +40,7 @@
struct omap2430_glue {
struct device *dev;
struct platform_device *musb;
+ struct clk *clk;
};
static struct timer_list musb_idle_timer;
@@ -277,9 +278,6 @@ static int omap2430_musb_suspend(struct musb *musb)
{
u32 l;
- if (!musb->clock)
- return 0;
-
/* in any role */
l = musb_readl(musb->mregs, OTG_FORCESTDBY);
l |= ENABLEFORCE; /* enable MSTANDBY */
@@ -291,11 +289,6 @@ static int omap2430_musb_suspend(struct musb *musb)
otg_set_suspend(musb->xceiv, 1);
- if (musb->set_clock)
- musb->set_clock(musb->clock, 0);
- else
- clk_disable(musb->clock);
-
return 0;
}
@@ -303,16 +296,8 @@ static int omap2430_musb_resume(struct musb *musb)
{
u32 l;
- if (!musb->clock)
- return 0;
-
otg_set_suspend(musb->xceiv, 0);
- if (musb->set_clock)
- musb->set_clock(musb->clock, 1);
- else
- clk_enable(musb->clock);
-
l = musb_readl(musb->mregs, OTG_SYSCONFIG);
l &= ~ENABLEWAKEUP; /* disable wakeup */
musb_writel(musb->mregs, OTG_SYSCONFIG, l);
@@ -356,6 +341,7 @@ static int __init omap2430_probe(struct platform_device *pdev)
struct musb_hdrc_platform_data *pdata = pdev->dev.platform_data;
struct platform_device *musb;
struct omap2430_glue *glue;
+ struct clk *clk;
int ret = -ENOMEM;
@@ -371,12 +357,26 @@ static int __init omap2430_probe(struct platform_device *pdev)
goto err1;
}
+ clk = clk_get(&pdev->dev, "ick");
+ if (IS_ERR(clk)) {
+ dev_err(&pdev->dev, "failed to get clock\n");
+ ret = PTR_ERR(clk);
+ goto err2;
+ }
+
+ ret = clk_enable(clk);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to enable clock\n");
+ goto err3;
+ }
+
musb->dev.parent = &pdev->dev;
musb->dev.dma_mask = &omap2430_dmamask;
musb->dev.coherent_dma_mask = omap2430_dmamask;
glue->dev = &pdev->dev;
glue->musb = musb;
+ glue->clk = clk;
pdata->platform_ops = &omap2430_ops;
@@ -386,23 +386,29 @@ static int __init omap2430_probe(struct platform_device *pdev)
pdev->num_resources);
if (ret) {
dev_err(&pdev->dev, "failed to add resources\n");
- goto err2;
+ goto err4;
}
ret = platform_device_add_data(musb, pdata, sizeof(*pdata));
if (ret) {
dev_err(&pdev->dev, "failed to add platform_data\n");
- goto err2;
+ goto err4;
}
ret = platform_device_add(musb);
if (ret) {
dev_err(&pdev->dev, "failed to register musb device\n");
- goto err2;
+ goto err4;
}
return 0;
+err4:
+ clk_disable(clk);
+
+err3:
+ clk_put(clk);
+
err2:
platform_device_put(musb);
@@ -419,6 +425,8 @@ static int __exit omap2430_remove(struct platform_device *pdev)
platform_device_del(glue->musb);
platform_device_put(glue->musb);
+ clk_disable(glue->clk);
+ clk_put(glue->clk);
kfree(glue);
return 0;
diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c
index 7427169..c891843 100644
--- a/drivers/usb/musb/tusb6010.c
+++ b/drivers/usb/musb/tusb6010.c
@@ -281,17 +281,6 @@ static int tusb_draw_power(struct otg_transceiver *x, unsigned mA)
void __iomem *tbase = musb->ctrl_base;
u32 reg;
- /*
- * Keep clock active when enabled. Note that this is not tied to
- * drawing VBUS, as with OTG mA can be less than musb->min_power.
- */
- if (musb->set_clock) {
- if (mA)
- musb->set_clock(musb->clock, 1);
- else
- musb->set_clock(musb->clock, 0);
- }
-
/* tps65030 seems to consume max 100mA, with maybe 60mA available
* (measured on one board) for things other than tps and tusb.
*
@@ -537,8 +526,6 @@ static void tusb_musb_set_vbus(struct musb *musb, int is_on)
devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
if (is_on) {
- if (musb->set_clock)
- musb->set_clock(musb->clock, 1);
timer = OTG_TIMER_MS(OTG_TIME_A_WAIT_VRISE);
musb->xceiv->default_a = 1;
musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
@@ -577,8 +564,6 @@ static void tusb_musb_set_vbus(struct musb *musb, int is_on)
devctl &= ~MUSB_DEVCTL_SESSION;
conf &= ~TUSB_DEV_CONF_USB_HOST_MODE;
- if (musb->set_clock)
- musb->set_clock(musb->clock, 0);
}
prcm &= ~(TUSB_PRCM_MNGMT_15_SW_EN | TUSB_PRCM_MNGMT_33_SW_EN);
--
1.7.3.2.343.g7d43d
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
