This series adds support for the EHCI controller on OMAP4 chips. (This enables the ethernet controller on the Pandaboard - finally!). I'm sorry for the really long delay - I know this has been in the works for a while. I've tested the series on an OMAP4 SDP and a Pandaboard. I'll be testing OMAP3 tomorrow. Dependencies: One patch depends on the mux framework patches by Benoit - which are already in linux-next; however the series compiles cleanly against current Linus' tree. What's pending: - OHCI support - Support for TLL and HSIC modes - Factoring out code common to ehci-omap and ohci-omap3 - Conversion to use omap_device and the hwmod database - Runtime PM support - Anand Anand Gadiyar (8): omap: clock: add clkdev aliases for EHCI clocks usb: ehci-omap: use clkdev aliases for functional clocks usb: ehci-omap: add helpers for checking port mode arm: omap4: add USBHOST and related base addresses usb: omap4: add platform init code for EHCI driver omap: usb: ehci: introduce HSIC mode usb: ehci-omap: Add OMAP4 support arm: omap4: select USB_ARCH_HAS_EHCI Keshava Munegowda (3): usb: ehci-omap: update clock names to be more generic usb: ehci-omap: don't hard-code TLL channel count usb: ehci: introduce CONFIG_USB_EHCI_HCD_OMAP arch/arm/mach-omap2/Kconfig | 1 + arch/arm/mach-omap2/clock3xxx_data.c | 5 + arch/arm/mach-omap2/clock44xx_data.c | 5 + arch/arm/mach-omap2/usb-ehci.c | 144 ++++++++++++- arch/arm/plat-omap/include/plat/omap44xx.h | 5 + arch/arm/plat-omap/include/plat/usb.h | 1 + drivers/usb/host/Kconfig | 8 + drivers/usb/host/ehci-hcd.c | 2 +- drivers/usb/host/ehci-omap.c | 314 +++++++++++++++++++++------ 9 files changed, 406 insertions(+), 79 deletions(-) -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
