USB errors on boot with plugged-in devices

[Manuel Lauss <manuel.lauss@xxxxxxxxxxxxxx>]

Hello,

Current Linux kernels have problems with my current USB setup:
I have a HP zr24w monitor with an integrated USB2 hub attached to
an ATI SB850 OHCI/EHCI controller, and an old logitech wireless receiver
plugged into one of the monitors' hub ports.

When linux boots and the zr24w is plugged in, linux usb core throws
the errors below.   Unplugging/replugging on other ports doesn't work
either.  However if when linux boots the zr24w is disconnected and
plugged in when linux has finished booting, it works without a hitch.
No problems on window or the BIOS for that matter.

Complete dmesg attached.

Thank you,
      Manuel Lauss

usb 1-5.1.3: khubd timed out on ep0out len=0/0
usb 1-5.1.3: khubd timed out on ep0out len=0/0
usb 1-5.1.3: device not accepting address 5, error -110
usb 1-5: clear tt buffer port 1, a3 ep0 t00000000
usb 1-5.1: khubd timed out on ep0out len=8/0
hub 1-5.1:1.0: cannot disable port 3 (err = -110)
usb 1-5.1: khubd timed out on ep0out len=0/0
hub 1-5.1:1.0: cannot reset port 3 (err = -110)
hub 1-5.1:1.0: port 3 not enabled, trying reset again...
usb 1-5: kworker/2:1 timed out on ep0out len=0/0
usb 1-5: clear tt 1 (0030) error -110
usb 1-5.1: khubd timed out on ep0out len=0/0
hub 1-5.1:1.0: cannot reset port 3 (err = -110)
hub 1-5.1:1.0: port 3 not enabled, trying reset again...
usb 1-5.1: khubd timed out on ep0out len=0/0
hub 1-5.1:1.0: cannot reset port 3 (err = -110)
hub 1-5.1:1.0: port 3 not enabled, trying reset again...
usb 1-5.1: khubd timed out on ep0out len=0/0
hub 1-5.1:1.0: cannot reset port 3 (err = -110)
hub 1-5.1:1.0: port 3 not enabled, trying reset again...
usb 1-5.1: khubd timed out on ep0out len=0/0
hub 1-5.1:1.0: cannot reset port 3 (err = -110)
hub 1-5.1:1.0: port 3 not enabled, trying reset again...
hub 1-5.1:1.0: Cannot enable port 3.  Maybe the USB cable is bad?
usb 1-5.1: khubd timed out on ep0out len=0/0
hub 1-5.1:1.0: cannot disable port 3 (err = -110)
usb 1-5.1: khubd timed out on ep0out len=0/0
hub 1-5.1:1.0: cannot reset port 3 (err = -110)
hub 1-5.1:1.0: port 3 not enabled, trying reset again...
usb 1-5.1: khubd timed out on ep0out len=0/0
hub 1-5.1:1.0: cannot reset port 3 (err = -110)
hub 1-5.1:1.0: port 3 not enabled, trying reset again...
usb 1-5.1: khubd timed out on ep0out len=0/0
hub 1-5.1:1.0: cannot reset port 3 (err = -110)
hub 1-5.1:1.0: port 3 not enabled, trying reset again...
usb 1-5.1: khubd timed out on ep0out len=0/0
hub 1-5.1:1.0: cannot reset port 3 (err = -110)
hub 1-5.1:1.0: port 3 not enabled, trying reset again...
usb 1-5.1: khubd timed out on ep0out len=0/0
hub 1-5.1:1.0: cannot reset port 3 (err = -110)
hub 1-5.1:1.0: port 3 not enabled, trying reset again...
hub 1-5.1:1.0: Cannot enable port 3.  Maybe the USB cable is bad?

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.37-rc2-00034-g3e48c53 (mano@flagship) (gcc version 4.4.5 (Gentoo 4.4.5 p1.0) ) #1 SMP PREEMPT Wed Nov 17 11:57:48 CET 2010
Command line: root=/dev/sda2 rootfstype=ext4 vga=0x37d noirqdebug quiet
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 0000000000098800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000cfcf0000 (usable)
 BIOS-e820: 00000000cfcf0000 - 00000000cfcf3000 (ACPI NVS)
 BIOS-e820: 00000000cfcf3000 - 00000000cfd00000 (ACPI data)
 BIOS-e820: 00000000cfd00000 - 00000000cfe00000 (reserved)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 0000000230000000 (usable)
NX (Execute Disable) protection: active
DMI 2.4 present.
DMI: GA-890GPA-UD3H/GA-890GPA-UD3H, BIOS F8b 09/23/2010
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x230000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-C7FFF write-protect
  C8000-FFFFF uncachable
MTRR variable ranges enabled:
  0 base 000000000000 mask FFFF80000000 write-back
  1 base 000080000000 mask FFFFC0000000 write-back
  2 base 0000C0000000 mask FFFFF0000000 write-back
  3 base 0000CFD00000 mask FFFFFFF00000 uncachable
  4 base 0000CFE00000 mask FFFFFFE00000 uncachable
  5 base 000100000000 mask FFFF00000000 write-back
  6 base 000200000000 mask FFFFE0000000 write-back
  7 base 000220000000 mask FFFFF0000000 write-back
TOM2: 0000000230000000 aka 8960M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 256MB, type WB
reg 3, base: 3325MB, range: 1MB, type UC
reg 4, base: 3326MB, range: 2MB, type UC
reg 5, base: 4GB, range: 4GB, type WB
reg 6, base: 8GB, range: 512MB, type WB
reg 7, base: 8704MB, range: 256MB, type WB
total RAM covered: 3325M
Found optimal setting for mtrr clean up
 gran_size: 64K 	chunk_size: 4M 	num_reg: 5  	lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 256MB, type WB
reg 3, base: 3325MB, range: 1MB, type UC
reg 4, base: 3326MB, range: 2MB, type UC
e820 update range: 00000000cfd00000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xcfcf0 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
Using GB pages for direct mapping
init_memory_mapping: 0000000000000000-00000000cfcf0000
 0000000000 - 00c0000000 page 1G
 00c0000000 - 00cfc00000 page 2M
 00cfc00000 - 00cfcf0000 page 4k
kernel direct mapping tables up to cfcf0000 @ 1fffd000-20000000
init_memory_mapping: 0000000100000000-0000000230000000
 0100000000 - 0200000000 page 1G
 0200000000 - 0230000000 page 2M
kernel direct mapping tables up to 230000000 @ cfcee000-cfcf0000
ACPI: RSDP 00000000000f5f00 00014 (v00 GBT   )
ACPI: RSDT 00000000cfcf3000 00038 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: FACP 00000000cfcf3040 00074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: DSDT 00000000cfcf30c0 076BC (v01 GBT    GBTUACPI 00001000 MSFT 03000000)
ACPI: FACS 00000000cfcf0000 00040
ACPI: SSDT 00000000cfcfa840 0088C (v01 PTLTD  POWERNOW 00000001  LTP 00000001)
ACPI: HPET 00000000cfcfb100 00038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
ACPI: MCFG 00000000cfcfb140 0003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: APIC 00000000cfcfa780 000BC (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: Local APIC address 0xfee00000
 [ffffea0000000000-ffffea0007bfffff] PMD -> [ffff8800bc000000-ffff8800c31fffff] on node 0
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   0x00100000 -> 0x00230000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
    0: 0x00000010 -> 0x00000098
    0: 0x00000100 -> 0x000cfcf0
    0: 0x00100000 -> 0x00230000
On node 0 totalpages: 2096248
  DMA zone: 56 pages used for memmap
  DMA zone: 6 pages reserved
  DMA zone: 3914 pages, LIFO batch:0
  DMA32 zone: 14280 pages used for memmap
  DMA32 zone: 832808 pages, LIFO batch:31
  Normal zone: 17024 pages used for memmap
  Normal zone: 1228160 pages, LIFO batch:31
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10b9a201 base: 0xfed00000
8 Processors exceeds NR_CPUS limit of 4
SMP: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
Allocating PCI resources starting at cfe00000 (gap: cfe00000:10200000)
setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 25 pages/cpu @ffff8800cfa00000 s73344 r8192 d20864 u524288
pcpu-alloc: s73344 r8192 d20864 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2064882
Kernel command line: root=/dev/sda2 rootfstype=ext4 vga=0x37d noirqdebug quiet
IRQ lockup detection disabled
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Memory: 8178180k/9175040k available (7038k kernel code, 790048k absent, 206812k reserved, 3066k data, 440k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Preemptable hierarchical RCU implementation.
	CONFIG_RCU_FANOUT set to non-default value of 2
	RCU-based detection of stalled CPUs is disabled.
	Verbose stalled-CPUs detection is disabled.
NR_IRQS:4352 nr_irqs:712 16
Console: colour dummy device 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 3414.962 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 6829.92 BogoMIPS (lpj=3414962)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
tseg: 00cfe00000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
Performance Events: AMD PMU driver.
... version:                0
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   0
... event mask:             000000000000000f
ACPI: Core revision 20101013
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Phenom(tm) II X4 965 Processor stepping 03
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node   0, Processors  #1
NMI watchdog enabled, takes one hw-pmu counter.
 #2
NMI watchdog enabled, takes one hw-pmu counter.
 #3 Ok.
NMI watchdog enabled, takes one hw-pmu counter.
Brought up 4 CPUs
Total of 4 processors activated (27321.17 BogoMIPS).
NET: Registered protocol family 16
node 0 link 0: io port [a000, ffff]
TOM: 00000000d0000000 aka 3328M
Fam 10h mmconf [e0000000, e00fffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [d0000000, dfffffff]
node 0 link 0: mmio [f0000000, fe02ffff]
node 0 link 0: mmio [e0000000, e05fffff] ==> [e0100000, e05fffff]
TOM2: 0000000230000000 aka 8960M
bus: [00, 05] on node 0 link 0
bus: 00 index 0 [io  0x0000-0xffff]
bus: 00 index 1 [mem 0x000a0000-0x000bffff]
bus: 00 index 2 [mem 0xd0000000-0xdfffffff]
bus: 00 index 3 [mem 0xe0600000-0xffffffff]
bus: 00 index 4 [mem 0xe0100000-0xe05fffff]
bus: 00 index 5 [mem 0x230000000-0xfcffffffff]
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7]
pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff]
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
pci_root PNP0A03:00: host bridge window [mem 0xcff00000-0xfebfffff]
pci 0000:00:00.0: [1022:9601] type 0 class 0x000600
pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
pci 0000:00:02.0: [1022:9603] type 1 class 0x000604
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:05.0: [1022:9605] type 1 class 0x000604
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: PME# disabled
pci 0000:00:0a.0: [1022:9609] type 1 class 0x000604
pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0a.0: PME# disabled
pci 0000:00:11.0: [1002:4391] type 0 class 0x000106
pci 0000:00:11.0: reg 10: [io  0xff00-0xff07]
pci 0000:00:11.0: reg 14: [io  0xfe00-0xfe03]
pci 0000:00:11.0: reg 18: [io  0xfd00-0xfd07]
pci 0000:00:11.0: reg 1c: [io  0xfc00-0xfc03]
pci 0000:00:11.0: reg 20: [io  0xfb00-0xfb0f]
pci 0000:00:11.0: reg 24: [mem 0xfe02f000-0xfe02f3ff]
pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
pci 0000:00:12.0: reg 10: [mem 0xfe02e000-0xfe02efff]
pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
pci 0000:00:12.2: reg 10: [mem 0xfe02d000-0xfe02d0ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: PME# disabled
pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
pci 0000:00:13.0: reg 10: [mem 0xfe02c000-0xfe02cfff]
pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
pci 0000:00:13.2: reg 10: [mem 0xfe02b000-0xfe02b0ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: PME# disabled
pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
pci 0000:00:14.2: reg 10: [mem 0xfe024000-0xfe027fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: PME# disabled
pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
pci 0000:00:14.5: reg 10: [mem 0xfe02a000-0xfe02afff]
pci 0000:00:15.0: [1002:43a0] type 1 class 0x000604
pci 0000:00:15.0: supports D1 D2
pci 0000:00:16.0: [1002:4397] type 0 class 0x000c03
pci 0000:00:16.0: reg 10: [mem 0xfe029000-0xfe029fff]
pci 0000:00:16.2: [1002:4396] type 0 class 0x000c03
pci 0000:00:16.2: reg 10: [mem 0xfe028000-0xfe0280ff]
pci 0000:00:16.2: supports D1 D2
pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:16.2: PME# disabled
pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
pci 0000:01:00.0: [10de:0611] type 0 class 0x000300
pci 0000:01:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 1c: [mem 0xf8000000-0xf9ffffff 64bit]
pci 0000:01:00.0: reg 24: [io  0xdf00-0xdf7f]
pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:00:02.0: PCI bridge to [bus 01-01]
pci 0000:00:02.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:02.0:   bridge window [mem 0xf8000000-0xfbffffff]
pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: [1033:0194] type 0 class 0x000c03
pci 0000:02:00.0: reg 10: [mem 0xfd8fe000-0xfd8fffff 64bit]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:05.0: PCI bridge to [bus 02-02]
pci 0000:00:05.0:   bridge window [io  0xc000-0xcfff]
pci 0000:00:05.0:   bridge window [mem 0xfd800000-0xfd8fffff]
pci 0000:00:05.0:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
pci 0000:03:00.0: [10ec:8168] type 0 class 0x000200
pci 0000:03:00.0: reg 10: [io  0xee00-0xeeff]
pci 0000:03:00.0: reg 18: [mem 0xfd9ff000-0xfd9fffff 64bit pref]
pci 0000:03:00.0: reg 20: [mem 0xfd9f8000-0xfd9fbfff 64bit pref]
pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:00:0a.0: PCI bridge to [bus 03-03]
pci 0000:00:0a.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:0a.0:   bridge window [mem 0xfdc00000-0xfdcfffff]
pci 0000:00:0a.0:   bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
pci 0000:04:0e.0: [104c:8024] type 0 class 0x000c00
pci 0000:04:0e.0: reg 10: [mem 0xfdeff000-0xfdeff7ff]
pci 0000:04:0e.0: reg 14: [mem 0xfdef8000-0xfdefbfff]
pci 0000:04:0e.0: supports D1 D2
pci 0000:04:0e.0: PME# supported from D0 D1 D2 D3hot
pci 0000:04:0e.0: PME# disabled
pci 0000:00:14.4: PCI bridge to [bus 04-04] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0xb000-0xbfff]
pci 0000:00:14.4:   bridge window [mem 0xfde00000-0xfdefffff]
pci 0000:00:14.4:   bridge window [mem 0xfdd00000-0xfddfffff pref]
pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0xcff00000-0xfebfffff] (subtractive decode)
pci 0000:05:00.0: [197b:2363] type 0 class 0x000106
pci 0000:05:00.0: reg 24: [mem 0xfdbfe000-0xfdbfffff]
pci 0000:05:00.0: PME# supported from D3hot
pci 0000:05:00.0: PME# disabled
pci 0000:05:00.1: [197b:2363] type 0 class 0x000101
pci 0000:05:00.1: reg 10: [io  0xaf00-0xaf07]
pci 0000:05:00.1: reg 14: [io  0xae00-0xae03]
pci 0000:05:00.1: reg 18: [io  0xad00-0xad07]
pci 0000:05:00.1: reg 1c: [io  0xac00-0xac03]
pci 0000:05:00.1: reg 20: [io  0xab00-0xab0f]
pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
pci 0000:00:15.0: PCI bridge to [bus 05-05]
pci 0000:00:15.0:   bridge window [io  0xa000-0xafff]
pci 0000:00:15.0:   bridge window [mem 0xfdb00000-0xfdbfffff]
pci 0000:00:15.0:   bridge window [mem 0xfda00000-0xfdafffff 64bit pref]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Advanced Linux Sound Architecture Driver Version 1.0.23.
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]
reserve RAM buffer: 0000000000098800 - 000000000009ffff 
reserve RAM buffer: 00000000cfcf0000 - 00000000cfffffff 
cfg80211: Calling CRDA to update world regulatory domain
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io  0x0cf8-0x0cff]
pnp 00:00: [io  0x0000-0x0cf7 window]
pnp 00:00: [io  0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000dffff window]
pnp 00:00: [mem 0xcff00000-0xfebfffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: [io  0x0010-0x001f]
pnp 00:01: [io  0x0022-0x003f]
pnp 00:01: [io  0x0044-0x005f]
pnp 00:01: [io  0x0062-0x0063]
pnp 00:01: [io  0x0065-0x006f]
pnp 00:01: [io  0x0074-0x007f]
pnp 00:01: [io  0x0091-0x0093]
pnp 00:01: [io  0x00a2-0x00bf]
pnp 00:01: [io  0x00e0-0x00ef]
pnp 00:01: [io  0x04d0-0x04d1]
pnp 00:01: [io  0x0220-0x0225]
pnp 00:01: [io  0x0290-0x0294]
pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [io  0x4100-0x411f]
pnp 00:02: [io  0x0228-0x022f]
pnp 00:02: [io  0x040b]
pnp 00:02: [io  0x04d6]
pnp 00:02: [io  0x0c00-0x0c01]
pnp 00:02: [io  0x0c14]
pnp 00:02: [io  0x0c50-0x0c52]
pnp 00:02: [io  0x0c6c-0x0c6d]
pnp 00:02: [io  0x0c6f]
pnp 00:02: [io  0x0cd0-0x0cd1]
pnp 00:02: [io  0x0cd2-0x0cd3]
pnp 00:02: [io  0x0cd4-0x0cdf]
pnp 00:02: [io  0x4000-0x40fe]
pnp 00:02: [io  0x4210-0x4217]
pnp 00:02: [io  0x0b00-0x0b0f]
pnp 00:02: [io  0x0b10-0x0b1f]
pnp 00:02: [io  0x0b20-0x0b3f]
pnp 00:02: [mem 0x00000000-0x00000fff window]
pnp 00:02: [mem 0xfee00400-0xfee00fff window]
pnp 00:02: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:03:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
pnp 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [dma 4]
pnp 00:03: [io  0x0000-0x000f]
pnp 00:03: [io  0x0080-0x0090]
pnp 00:03: [io  0x0094-0x009f]
pnp 00:03: [io  0x00c0-0x00df]
pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:04: [io  0x0070-0x0073]
pnp 00:04: [irq 8]
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: [io  0x0061]
pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:06: [io  0x00f0-0x00ff]
pnp 00:06: [irq 13]
pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:07: [mem 0xe0000000-0xefffffff]
pnp 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: [mem 0x000f0000-0x000f3fff]
pnp 00:08: [mem 0x000f4000-0x000f7fff]
pnp 00:08: [mem 0x000f8000-0x000fbfff]
pnp 00:08: [mem 0x000fc000-0x000fffff]
pnp 00:08: [mem 0xcfcf0000-0xcfcfffff]
pnp 00:08: [mem 0xffff0000-0xffffffff]
pnp 00:08: [mem 0x00000000-0x0009ffff]
pnp 00:08: [mem 0x00100000-0xcfceffff]
pnp 00:08: [mem 0xcfd00000-0xcfdfffff]
pnp 00:08: [mem 0xcfe00000-0xcfefffff]
pnp 00:08: [mem 0x00000000-0xffffffffffffffff disabled]
pnp 00:08: [mem 0xfec00000-0xfec00fff]
pnp 00:08: [mem 0xfee00000-0xfee00fff]
pnp 00:08: [mem 0xfff80000-0xfffeffff]
pnp 00:08: disabling [mem 0x000f0000-0x000f3fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:08: disabling [mem 0x000f4000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:08: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:08: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:08: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:08: disabling [mem 0x00100000-0xcfceffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 9 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [io  0x04d0-0x04d1] has been reserved
system 00:01: [io  0x0220-0x0225] has been reserved
system 00:01: [io  0x0290-0x0294] has been reserved
system 00:02: [io  0x4100-0x411f] has been reserved
system 00:02: [io  0x0228-0x022f] has been reserved
system 00:02: [io  0x040b] has been reserved
system 00:02: [io  0x04d6] has been reserved
system 00:02: [io  0x0c00-0x0c01] has been reserved
system 00:02: [io  0x0c14] has been reserved
system 00:02: [io  0x0c50-0x0c52] has been reserved
system 00:02: [io  0x0c6c-0x0c6d] has been reserved
system 00:02: [io  0x0c6f] has been reserved
system 00:02: [io  0x0cd0-0x0cd1] has been reserved
system 00:02: [io  0x0cd2-0x0cd3] has been reserved
system 00:02: [io  0x0cd4-0x0cdf] has been reserved
system 00:02: [io  0x4000-0x40fe] has been reserved
system 00:02: [io  0x4210-0x4217] has been reserved
system 00:02: [io  0x0b00-0x0b0f] has been reserved
system 00:02: [io  0x0b10-0x0b1f] has been reserved
system 00:02: [io  0x0b20-0x0b3f] has been reserved
system 00:02: [mem 0xfee00400-0xfee00fff window] has been reserved
system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
system 00:08: [mem 0xcfcf0000-0xcfcfffff] could not be reserved
system 00:08: [mem 0xffff0000-0xffffffff] has been reserved
system 00:08: [mem 0xcfd00000-0xcfdfffff] has been reserved
system 00:08: [mem 0xcfe00000-0xcfefffff] could not be reserved
system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:08: [mem 0xfee00000-0xfee00fff] could not be reserved
system 00:08: [mem 0xfff80000-0xfffeffff] has been reserved
pci 0000:01:00.0: BAR 6: assigned [mem 0xfbfe0000-0xfbffffff pref]
pci 0000:00:02.0: PCI bridge to [bus 01-01]
pci 0000:00:02.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:02.0:   bridge window [mem 0xf8000000-0xfbffffff]
pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:05.0: PCI bridge to [bus 02-02]
pci 0000:00:05.0:   bridge window [io  0xc000-0xcfff]
pci 0000:00:05.0:   bridge window [mem 0xfd800000-0xfd8fffff]
pci 0000:00:05.0:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
pci 0000:03:00.0: BAR 6: assigned [mem 0xfd9c0000-0xfd9dffff pref]
pci 0000:00:0a.0: PCI bridge to [bus 03-03]
pci 0000:00:0a.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:0a.0:   bridge window [mem 0xfdc00000-0xfdcfffff]
pci 0000:00:0a.0:   bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 04-04]
pci 0000:00:14.4:   bridge window [io  0xb000-0xbfff]
pci 0000:00:14.4:   bridge window [mem 0xfde00000-0xfdefffff]
pci 0000:00:14.4:   bridge window [mem 0xfdd00000-0xfddfffff pref]
pci 0000:00:15.0: PCI bridge to [bus 05-05]
pci 0000:00:15.0:   bridge window [io  0xa000-0xafff]
pci 0000:00:15.0:   bridge window [mem 0xfdb00000-0xfdbfffff]
pci 0000:00:15.0:   bridge window [mem 0xfda00000-0xfdafffff 64bit pref]
pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:02.0: setting latency timer to 64
pci 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:05.0: setting latency timer to 64
pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:0a.0: setting latency timer to 64
pci 0000:00:15.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:15.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xcff00000-0xfebfffff]
pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfbffffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io  0xc000-0xcfff]
pci_bus 0000:02: resource 1 [mem 0xfd800000-0xfd8fffff]
pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
pci_bus 0000:03: resource 1 [mem 0xfdc00000-0xfdcfffff]
pci_bus 0000:03: resource 2 [mem 0xfd900000-0xfd9fffff 64bit pref]
pci_bus 0000:04: resource 0 [io  0xb000-0xbfff]
pci_bus 0000:04: resource 1 [mem 0xfde00000-0xfdefffff]
pci_bus 0000:04: resource 2 [mem 0xfdd00000-0xfddfffff pref]
pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:04: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:04: resource 8 [mem 0xcff00000-0xfebfffff]
pci_bus 0000:05: resource 0 [io  0xa000-0xafff]
pci_bus 0000:05: resource 1 [mem 0xfdb00000-0xfdbfffff]
pci_bus 0000:05: resource 2 [mem 0xfda00000-0xfdafffff 64bit pref]
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0000:01:00.0: Boot video device
pci 0000:02:00.0: xHCI HW did not halt within 2000 usec status = 0x0
PCI: CLS 4 bytes, default 64
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff8800caceb000 - ffff8800ceceb000
software IO TLB at phys 0xcaceb000 - 0xceceb000
microcode: CPU0: patch_level=0x10000c8
microcode: CPU1: patch_level=0x10000c8
microcode: CPU2: patch_level=0x10000c8
microcode: CPU3: patch_level=0x10000c8
microcode: Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
HugeTLB registered 2 MB page size, pre-allocated 0 pages
squashfs: version 4.0 (2009/01/31) Phillip Lougher
nfs4filelayout_init: NFSv4 File Layout Driver Registering...
Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
fuse init (API version 7.15)
SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
Btrfs loaded
msgmni has been set to 15973
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
vesafb: framebuffer at 0xf9000000, mapped to 0xffffc90010100000, using 14336k, total 14336k
vesafb: mode is 1920x1200x32, linelength=7680, pages=1
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 240x75
fb0: VESA VGA frame buffer device
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
loop: module loaded
SCSI Media Changer driver v0.25 
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:11.0: irq 40 for MSI/MSI-X
ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs 
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 40
ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 40
ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 40
ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 40
ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f300 irq 40
ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f380 irq 40
ahci 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
ahci 0000:05:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:05:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
ahci 0000:05:00.0: setting latency timer to 64
scsi6 : ahci
scsi7 : ahci
ata7: SATA max UDMA/133 abar m8192@0xfdbfe000 port 0xfdbfe100 irq 17
ata8: SATA max UDMA/133 abar m8192@0xfdbfe000 port 0xfdbfe180 irq 17
pata_jmicron 0000:05:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pata_jmicron 0000:05:00.1: setting latency timer to 64
scsi8 : pata_jmicron
scsi9 : pata_jmicron
ata9: PATA max UDMA/100 cmd 0xaf00 ctl 0xae00 bmdma 0xab00 irq 17
ata10: PATA max UDMA/100 cmd 0xad00 ctl 0xac00 bmdma 0xab08 irq 17
e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k6-NAPI
e1000: Copyright (c) 1999-2006 Intel Corporation.
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
r8169 0000:03:00.0: setting latency timer to 64
r8169 0000:03:00.0: irq 41 for MSI/MSI-X
r8169 0000:03:00.0: eth0: RTL8168d/8111d at 0xffffc9000001a000, 6c:f0:49:5e:70:2e, XID 083000c0 IRQ 41
usbcore: registered new interface driver rt73usb
firewire_ohci 0000:04:0e.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
firewire_ohci: Added fw-ohci device 0000:04:0e.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
usbmon: debugfs is not available
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd: block sizes: qh 104 qtd 96 itd 192 sitd 96
ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ehci_hcd 0000:00:12.2: EHCI Host Controller
/usr/src/linux-2.6.git/drivers/usb/core/inode.c: creating file 'devices'
/usr/src/linux-2.6.git/drivers/usb/core/inode.c: creating file '001'
ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:12.2: reset hcs_params 0x101505 dbg=1 cc=1 pcc=5 ordered !ppc ports=5
ehci_hcd 0000:00:12.2: reset hcc_params a072 thresh 7 uframes 256/512/1024
ehci_hcd 0000:00:12.2: debug port 1
ehci_hcd 0000:00:12.2: reset command 0080012 (park)=0 ithresh=8 Periodic period=1024 Reset HALT
ehci_hcd 0000:00:12.2: MWI active
ehci_hcd 0000:00:12.2: supports USB remote wakeup
ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02d000
ehci_hcd 0000:00:12.2: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
ehci_hcd 0000:00:12.2: init command 0010005 (park)=0 ithresh=1 period=512 RUN
ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: default language 0x0409
usb usb1: udev 1, busnum 1, minor = 0
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.37-rc2-00034-g3e48c53 ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
usb usb1: usb_probe_device
usb usb1: configuration #1 chosen from 1 choice
usb usb1: adding 1-0:1.0 (config #1, interface 0)
hub 1-0:1.0: usb_probe_interface
hub 1-0:1.0: usb_probe_interface - got id
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
hub 1-0:1.0: standalone hub
hub 1-0:1.0: no power switching (usb 1.0)
hub 1-0:1.0: individual port over-current protection
hub 1-0:1.0: power on to power good time: 20ms
hub 1-0:1.0: local power source is good
hub 1-0:1.0: trying to enable port power on non-switchable hub
/usr/src/linux-2.6.git/drivers/usb/core/inode.c: creating file '001'
ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ehci_hcd 0000:00:13.2: EHCI Host Controller
/usr/src/linux-2.6.git/drivers/usb/core/inode.c: creating file '002'
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:13.2: reset hcs_params 0x101505 dbg=1 cc=1 pcc=5 ordered !ppc ports=5
ehci_hcd 0000:00:13.2: reset hcc_params a072 thresh 7 uframes 256/512/1024
ehci_hcd 0000:00:13.2: debug port 1
ehci_hcd 0000:00:13.2: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
ehci_hcd 0000:00:13.2: MWI active
ehci_hcd 0000:00:13.2: supports USB remote wakeup
ehci_hcd 0000:00:13.2: irq 17, io mem 0xfe02b000
ehci_hcd 0000:00:13.2: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
ehci_hcd 0000:00:13.2: init command 0010005 (park)=0 ithresh=1 period=512 RUN
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: default language 0x0409
usb usb2: udev 1, busnum 2, minor = 128
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.37-rc2-00034-g3e48c53 ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
usb usb2: usb_probe_device
usb usb2: configuration #1 chosen from 1 choice
usb usb2: adding 2-0:1.0 (config #1, interface 0)
hub 2-0:1.0: usb_probe_interface
hub 2-0:1.0: usb_probe_interface - got id
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
hub 2-0:1.0: standalone hub
hub 2-0:1.0: no power switching (usb 1.0)
hub 2-0:1.0: individual port over-current protection
hub 2-0:1.0: power on to power good time: 20ms
hub 2-0:1.0: local power source is good
hub 2-0:1.0: trying to enable port power on non-switchable hub
/usr/src/linux-2.6.git/drivers/usb/core/inode.c: creating file '001'
ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ehci_hcd 0000:00:16.2: EHCI Host Controller
/usr/src/linux-2.6.git/drivers/usb/core/inode.c: creating file '003'
ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:16.2: reset hcs_params 0x101404 dbg=1 cc=1 pcc=4 ordered !ppc ports=4
ehci_hcd 0000:00:16.2: reset hcc_params a072 thresh 7 uframes 256/512/1024
ehci_hcd 0000:00:16.2: debug port 1
ehci_hcd 0000:00:16.2: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
ehci_hcd 0000:00:16.2: MWI active
ehci_hcd 0000:00:16.2: supports USB remote wakeup
ehci_hcd 0000:00:16.2: irq 17, io mem 0xfe028000
ehci_hcd 0000:00:16.2: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
ehci_hcd 0000:00:16.2: init command 0010005 (park)=0 ithresh=1 period=512 RUN
ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
usb usb3: default language 0x0409
usb usb3: udev 1, busnum 3, minor = 256
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.37-rc2-00034-g3e48c53 ehci_hcd
usb usb3: SerialNumber: 0000:00:16.2
usb usb3: usb_probe_device
usb usb3: configuration #1 chosen from 1 choice
usb usb3: adding 3-0:1.0 (config #1, interface 0)
hub 3-0:1.0: usb_probe_interface
hub 3-0:1.0: usb_probe_interface - got id
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
hub 3-0:1.0: standalone hub
hub 3-0:1.0: no power switching (usb 1.0)
hub 3-0:1.0: individual port over-current protection
hub 3-0:1.0: power on to power good time: 20ms
hub 3-0:1.0: local power source is good
hub 3-0:1.0: trying to enable port power on non-switchable hub
/usr/src/linux-2.6.git/drivers/usb/core/inode.c: creating file '001'
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd: block sizes: ed 80 td 96
ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:12.0: OHCI Host Controller
/usr/src/linux-2.6.git/drivers/usb/core/inode.c: creating file '004'
ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:12.0: enabled AMD prefetch quirk
ohci_hcd 0000:00:12.0: created debug files
ohci_hcd 0000:00:12.0: supports USB remote wakeup
ohci_hcd 0000:00:12.0: irq 18, io mem 0xfe02e000
ata9.00: ATAPI: TSSTcorpCD/DVDW SH-S182D, SB05, max UDMA/33
ata9.00: configured for UDMA/33
ohci_hcd 0000:00:12.0: OHCI controller state
ohci_hcd 0000:00:12.0: OHCI 1.0, NO legacy support registers
ohci_hcd 0000:00:12.0: control 0x283 RWC HCFS=operational CBSR=3
ohci_hcd 0000:00:12.0: cmdstatus 0x00000 SOC=0
ohci_hcd 0000:00:12.0: intrstatus 0x00000004 SF
ohci_hcd 0000:00:12.0: intrenable 0x8000005a MIE RHSC UE RD WDH
ohci_hcd 0000:00:12.0: hcca frame #0005
ohci_hcd 0000:00:12.0: roothub.a 02000205 POTPGT=2 NPS NDP=5(5)
ohci_hcd 0000:00:12.0: roothub.b 00000000 PPCM=0000 DR=0000
ohci_hcd 0000:00:12.0: roothub.status 00008000 DRWE
ohci_hcd 0000:00:12.0: roothub.portstatus [0] 0x00000100 PPS
ohci_hcd 0000:00:12.0: roothub.portstatus [1] 0x00000100 PPS
ohci_hcd 0000:00:12.0: roothub.portstatus [2] 0x00000100 PPS
ohci_hcd 0000:00:12.0: roothub.portstatus [3] 0x00000100 PPS
ohci_hcd 0000:00:12.0: roothub.portstatus [4] 0x00010100 CSC PPS
usb usb4: default language 0x0409
usb usb4: udev 1, busnum 4, minor = 384
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.37-rc2-00034-g3e48c53 ohci_hcd
usb usb4: SerialNumber: 0000:00:12.0
usb usb4: usb_probe_device
usb usb4: configuration #1 chosen from 1 choice
usb usb4: adding 4-0:1.0 (config #1, interface 0)
hub 4-0:1.0: usb_probe_interface
hub 4-0:1.0: usb_probe_interface - got id
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
hub 4-0:1.0: standalone hub
hub 4-0:1.0: no power switching (usb 1.0)
hub 4-0:1.0: global over-current protection
hub 4-0:1.0: power on to power good time: 4ms
hub 4-0:1.0: local power source is good
hub 4-0:1.0: no over-current condition exists
hub 4-0:1.0: trying to enable port power on non-switchable hub
/usr/src/linux-2.6.git/drivers/usb/core/inode.c: creating file '001'
ehci_hcd 0000:00:12.2: HS companion for 0000:00:12.0
ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.0: OHCI Host Controller
/usr/src/linux-2.6.git/drivers/usb/core/inode.c: creating file '005'
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:13.0: enabled AMD prefetch quirk
ohci_hcd 0000:00:13.0: created debug files
ohci_hcd 0000:00:13.0: supports USB remote wakeup
ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02c000
ehci_hcd 0000:00:12.2: GetStatus port:5 status 001803 0  ACK POWER sig=j CSC CONNECT
hub 1-0:1.0: port 5: status 0501 change 0001
ehci_hcd 0000:00:13.2: GetStatus port:1 status 001803 0  ACK POWER sig=j CSC CONNECT
hub 2-0:1.0: port 1: status 0501 change 0001
ehci_hcd 0000:00:16.2: GetStatus port:2 status 001803 0  ACK POWER sig=j CSC CONNECT
hub 3-0:1.0: port 2: status 0501 change 0001
ohci_hcd 0000:00:13.0: OHCI controller state
ohci_hcd 0000:00:13.0: OHCI 1.0, NO legacy support registers
ohci_hcd 0000:00:13.0: control 0x283 RWC HCFS=operational CBSR=3
ohci_hcd 0000:00:13.0: cmdstatus 0x00000 SOC=0
ohci_hcd 0000:00:13.0: intrstatus 0x00000004 SF
ohci_hcd 0000:00:13.0: intrenable 0x8000005a MIE RHSC UE RD WDH
ohci_hcd 0000:00:13.0: hcca frame #0005
ohci_hcd 0000:00:13.0: roothub.a 02000205 POTPGT=2 NPS NDP=5(5)
ohci_hcd 0000:00:13.0: roothub.b 00000000 PPCM=0000 DR=0000
ohci_hcd 0000:00:13.0: roothub.status 00008000 DRWE
ohci_hcd 0000:00:13.0: roothub.portstatus [0] 0x00010100 CSC PPS
ohci_hcd 0000:00:13.0: roothub.portstatus [1] 0x00000100 PPS
ohci_hcd 0000:00:13.0: roothub.portstatus [2] 0x00000100 PPS
ohci_hcd 0000:00:13.0: roothub.portstatus [3] 0x00000100 PPS
ohci_hcd 0000:00:13.0: roothub.portstatus [4] 0x00000100 PPS
usb usb5: default language 0x0409
usb usb5: udev 1, busnum 5, minor = 512
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.37-rc2-00034-g3e48c53 ohci_hcd
usb usb5: SerialNumber: 0000:00:13.0
usb usb5: usb_probe_device
usb usb5: configuration #1 chosen from 1 choice
usb usb5: adding 5-0:1.0 (config #1, interface 0)
hub 5-0:1.0: usb_probe_interface
hub 5-0:1.0: usb_probe_interface - got id
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 5 ports detected
hub 5-0:1.0: standalone hub
hub 5-0:1.0: no power switching (usb 1.0)
hub 5-0:1.0: global over-current protection
hub 5-0:1.0: power on to power good time: 4ms
hub 5-0:1.0: local power source is good
hub 5-0:1.0: no over-current condition exists
hub 5-0:1.0: trying to enable port power on non-switchable hub
/usr/src/linux-2.6.git/drivers/usb/core/inode.c: creating file '001'
ehci_hcd 0000:00:13.2: HS companion for 0000:00:13.0
ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:14.5: OHCI Host Controller
/usr/src/linux-2.6.git/drivers/usb/core/inode.c: creating file '006'
ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:14.5: enabled AMD prefetch quirk
ohci_hcd 0000:00:14.5: created debug files
ohci_hcd 0000:00:14.5: supports USB remote wakeup
ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe02a000
ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [4] = 0x00010100 CSC PPS
ata4: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
hub 1-0:1.0: state 7 ports 5 chg 0020 evt 0000
hub 1-0:1.0: port 5, status 0501, change 0000, 480 Mb/s
ohci_hcd 0000:00:14.5: OHCI controller state
ohci_hcd 0000:00:14.5: OHCI 1.0, NO legacy support registers
ohci_hcd 0000:00:14.5: control 0x283 RWC HCFS=operational CBSR=3
ohci_hcd 0000:00:14.5: cmdstatus 0x00000 SOC=0
ohci_hcd 0000:00:14.5: intrstatus 0x00000004 SF
ohci_hcd 0000:00:14.5: intrenable 0x8000005a MIE RHSC UE RD WDH
ohci_hcd 0000:00:14.5: hcca frame #0005
ohci_hcd 0000:00:14.5: roothub.a 02000202 POTPGT=2 NPS NDP=2(2)
ohci_hcd 0000:00:14.5: roothub.b 00000000 PPCM=0000 DR=0000
ohci_hcd 0000:00:14.5: roothub.status 00008000 DRWE
ohci_hcd 0000:00:14.5: roothub.portstatus [0] 0x00000100 PPS
ohci_hcd 0000:00:14.5: roothub.portstatus [1] 0x00000100 PPS
usb usb6: default language 0x0409
usb usb6: udev 1, busnum 6, minor = 640
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.37-rc2-00034-g3e48c53 ohci_hcd
usb usb6: SerialNumber: 0000:00:14.5
usb usb6: usb_probe_device
usb usb6: configuration #1 chosen from 1 choice
usb usb6: adding 6-0:1.0 (config #1, interface 0)
hub 6-0:1.0: usb_probe_interface
hub 6-0:1.0: usb_probe_interface - got id
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
hub 6-0:1.0: standalone hub
hub 6-0:1.0: no power switching (usb 1.0)
hub 6-0:1.0: global over-current protection
hub 6-0:1.0: power on to power good time: 4ms
hub 6-0:1.0: local power source is good
hub 6-0:1.0: no over-current condition exists
hub 6-0:1.0: trying to enable port power on non-switchable hub
/usr/src/linux-2.6.git/drivers/usb/core/inode.c: creating file '001'
ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:16.0: OHCI Host Controller
/usr/src/linux-2.6.git/drivers/usb/core/inode.c: creating file '007'
ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7
ohci_hcd 0000:00:16.0: enabled AMD prefetch quirk
ohci_hcd 0000:00:16.0: created debug files
ohci_hcd 0000:00:16.0: supports USB remote wakeup
ohci_hcd 0000:00:16.0: irq 18, io mem 0xfe029000
ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [0] = 0x00010100 CSC PPS
ehci_hcd 0000:00:12.2: port 5 high speed
ehci_hcd 0000:00:12.2: GetStatus port:5 status 001005 0  ACK POWER sig=se0 PE CONNECT
ohci_hcd 0000:00:16.0: OHCI controller state
ohci_hcd 0000:00:16.0: OHCI 1.0, NO legacy support registers
ohci_hcd 0000:00:16.0: control 0x283 RWC HCFS=operational CBSR=3
ohci_hcd 0000:00:16.0: cmdstatus 0x00000 SOC=0
ohci_hcd 0000:00:16.0: intrstatus 0x00000004 SF
ohci_hcd 0000:00:16.0: intrenable 0x8000005a MIE RHSC UE RD WDH
ohci_hcd 0000:00:16.0: hcca frame #0005
ohci_hcd 0000:00:16.0: roothub.a 02000204 POTPGT=2 NPS NDP=4(4)
ohci_hcd 0000:00:16.0: roothub.b 00000000 PPCM=0000 DR=0000
ohci_hcd 0000:00:16.0: roothub.status 00008000 DRWE
ohci_hcd 0000:00:16.0: roothub.portstatus [0] 0x00000100 PPS
ohci_hcd 0000:00:16.0: roothub.portstatus [1] 0x00010100 CSC PPS
ohci_hcd 0000:00:16.0: roothub.portstatus [2] 0x00000100 PPS
ohci_hcd 0000:00:16.0: roothub.portstatus [3] 0x00000100 PPS
usb usb7: default language 0x0409
usb usb7: udev 1, busnum 7, minor = 768
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.37-rc2-00034-g3e48c53 ohci_hcd
usb usb7: SerialNumber: 0000:00:16.0
usb usb7: usb_probe_device
usb usb7: configuration #1 chosen from 1 choice
usb usb7: adding 7-0:1.0 (config #1, interface 0)
hub 7-0:1.0: usb_probe_interface
hub 7-0:1.0: usb_probe_interface - got id
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 4 ports detected
hub 7-0:1.0: standalone hub
hub 7-0:1.0: no power switching (usb 1.0)
hub 7-0:1.0: global over-current protection
hub 7-0:1.0: power on to power good time: 4ms
hub 7-0:1.0: local power source is good
hub 7-0:1.0: no over-current condition exists
hub 7-0:1.0: trying to enable port power on non-switchable hub
/usr/src/linux-2.6.git/drivers/usb/core/inode.c: creating file '001'
ehci_hcd 0000:00:16.2: HS companion for 0000:00:16.0
xhci_hcd 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
xhci_hcd 0000:02:00.0: setting latency timer to 64
xhci_hcd 0000:02:00.0: xHCI Host Controller
/usr/src/linux-2.6.git/drivers/usb/core/inode.c: creating file '008'
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 8
xhci_hcd 0000:02:00.0: supports USB remote wakeup
xhci_hcd 0000:02:00.0: irq 17, io mem 0xfd8fe000
xhci_hcd 0000:02:00.0: irq 42 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 43 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 44 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 45 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 46 for MSI/MSI-X
usb usb8: No SuperSpeed endpoint companion for config 1  interface 0 altsetting 0 ep 129: using minimum values
usb usb8: default language 0x0409
usb usb8: udev 1, busnum 8, minor = 896
usb usb8: New USB device found, idVendor=1d6b, idProduct=0003
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: xHCI Host Controller
usb usb8: Manufacturer: Linux 2.6.37-rc2-00034-g3e48c53 xhci_hcd
usb usb8: SerialNumber: 0000:02:00.0
usb usb8: usb_probe_device
usb usb8: configuration #1 chosen from 1 choice
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
usb usb8: adding 8-0:1.0 (config #1, interface 0)
hub 8-0:1.0: usb_probe_interface
hub 8-0:1.0: usb_probe_interface - got id
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 4 ports detected
hub 8-0:1.0: standalone hub
hub 8-0:1.0: individual port power switching
hub 8-0:1.0: individual port over-current protection
hub 8-0:1.0: TT requires at most 8 FS bit times (666 ns)
hub 8-0:1.0: power on to power good time: 20ms
hub 8-0:1.0: local power source is good
hub 8-0:1.0: enabling power on all ports
/usr/src/linux-2.6.git/drivers/usb/core/inode.c: creating file '001'
PNP: No PS/2 controller found. Probing ports directly.
usb 1-5: new high speed USB device using ehci_hcd and address 2
Failed to disable AUX port, but continuing anyway... Is this a SiS?
If AUX port is really absent please use the 'i8042.noaux' option.
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5.00: ATAPI: HL-DT-ST BDDVDRW GGC-H20L, 1.00, max UDMA/133
ata5.00: configured for UDMA/133
ehci_hcd 0000:00:12.2: port 5 high speed
ehci_hcd 0000:00:12.2: GetStatus port:5 status 001005 0  ACK POWER sig=se0 PE CONNECT
ata1.00: ATA-7: Hitachi HDS721010KLA330, GKAOA70M, max UDMA/133
ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      Hitachi HDS72101 GKAO PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: Attached scsi generic sg0 type 0
ata2.00: ATA-7: Hitachi HDS721010KLA330, GKAOA70M, max UDMA/133
ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access     ATA      Hitachi HDS72101 GKAO PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ohci_hcd 0000:00:16.0: GetStatus roothub.portstatus [1] = 0x00010100 CSC PPS
 sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
 sdb: sdb1 sdb2
sd 1:0:0:0: [sdb] Attached SCSI disk
usb 1-5: udev 2, busnum 1, minor = 1
usb 1-5: New USB device found, idVendor=0409, idProduct=005a
usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-5: usb_probe_device
usb 1-5: configuration #1 chosen from 1 choice
usb 1-5: adding 1-5:1.0 (config #1, interface 0)
hub 1-5:1.0: usb_probe_interface
hub 1-5:1.0: usb_probe_interface - got id
hub 1-5:1.0: USB hub found
hub 1-5:1.0: 4 ports detected
hub 1-5:1.0: standalone hub
hub 1-5:1.0: ganged power switching
hub 1-5:1.0: global over-current protection
hub 1-5:1.0: Single TT
hub 1-5:1.0: TT requires at most 16 FS bit times (1332 ns)
hub 1-5:1.0: power on to power good time: 0ms
hub 1-5:1.0: local power source is good
hub 1-5:1.0: no over-current condition exists
hub 1-5:1.0: enabling power on all ports
/usr/src/linux-2.6.git/drivers/usb/core/inode.c: creating file '002'
hub 2-0:1.0: state 7 ports 5 chg 0002 evt 0000
hub 2-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
scsi 4:0:0:0: CD-ROM            HL-DT-ST BDDVDRW GGC-H20L 1.00 PQ: 0 ANSI: 5
ehci_hcd 0000:00:13.2: port 1 full speed --> companion
ehci_hcd 0000:00:13.2: GetStatus port:1 status 003801 0  ACK POWER OWNER sig=j CONNECT
hub 2-0:1.0: port 1 not reset yet, waiting 50ms
ohci_hcd 0000:00:12.0: auto-stop root hub
firewire_core: created device fw0: GUID 005f3f8f006cf049, S400
hub 1-5:1.0: port 1: status 0101 change 0001
ehci_hcd 0000:00:13.2: GetStatus port:1 status 003002 0  ACK POWER OWNER sig=se0 CSC
hub 3-0:1.0: state 7 ports 4 chg 0004 evt 0000
hub 3-0:1.0: port 2, status 0501, change 0000, 480 Mb/s
serio: i8042 KBD port at 0x60,0x64 irq 1
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
i2c /dev entries driver
lirc_dev: IR Remote Control driver registered, major 251 
IR NEC protocol handler initialized
IR RC5(x) protocol handler initialized
IR RC6 protocol handler initialized
IR JVC protocol handler initialized
IR Sony protocol handler initialized
IR RC5 (streamzap) protocol handler initialized
IR LIRC bridge handler initialized
usbcore: registered new interface driver imon
usbcore: registered new interface driver mceusb
usbcore: registered new interface driver streamzap
Linux video capture interface: v2.00
it87: Found IT8720F chip at 0x228, revision 8
it87: Routing internal VCCH to in7
it87: Beeping is supported
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@xxxxxxxxxx
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ehci_hcd 0000:00:16.2: port 2 high speed
ehci_hcd 0000:00:16.2: GetStatus port:2 status 001005 0  ACK POWER sig=se0 PE CONNECT
hda_codec: ALC892: BIOS auto-probing.
input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input2
ALSA device list:
  #0: HDA ATI SB at 0xfe024000 irq 16
IPv4 over IPv4 tunneling driver
TCP bic registered
TCP cubic registered
TCP westwood registered
TCP highspeed registered
TCP hybla registered
TCP htcp registered
TCP vegas registered
TCP veno registered
TCP scalable registered
TCP lp registered
TCP yeah registered
TCP illinois registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
tunl0: Disabled Privacy Extensions
Mobile IPv6
IPv6 over IPv4 tunneling driver
sit0: Disabled Privacy Extensions
ip6tnl0: Disabled Privacy Extensions
NET: Registered protocol family 17
NET: Registered protocol family 15
Bridge firewalling registered
Ebtables v2.0 registered
802.1Q VLAN Support v1.8 Ben Greear <greearb@xxxxxxxxxxxxxxx>
All bugs added by David S. Miller <davem@xxxxxxxxxx>
lib80211: common routines for IEEE802.11 drivers
lib80211_crypt: registered algorithm 'NULL'
Registering the dns_resolver key type
powernow-k8: Found 1 AMD Phenom(tm) II X4 965 Processor (4 cpu cores) (version 2.20.00)
powernow-k8:    0 : pstate 0 (3400 MHz)
powernow-k8:    1 : pstate 1 (2700 MHz)
powernow-k8:    2 : pstate 2 (2200 MHz)
powernow-k8:    3 : pstate 3 (800 MHz)
rtc_cmos 00:04: setting system clock to 2010-11-18 14:59:35 UTC (1290092375)
BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
usb 1-5: link qh256-0001/ffff88022ef25380 start 1 [1/0 us]
usb 3-2: new high speed USB device using ehci_hcd and address 2
ehci_hcd 0000:00:16.2: port 2 high speed
ehci_hcd 0000:00:16.2: GetStatus port:2 status 001005 0  ACK POWER sig=se0 PE CONNECT
ohci_hcd 0000:00:16.0: auto-stop root hub
usb 3-2: default language 0x0409
usb 3-2: udev 2, busnum 3, minor = 257
usb 3-2: New USB device found, idVendor=058f, idProduct=6362
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-2: Product: Mass Storage Device
usb 3-2: Manufacturer: Generic
usb 3-2: SerialNumber: 058F312D81B1
usb 3-2: usb_probe_device
usb 3-2: configuration #1 chosen from 1 choice
usb 3-2: adding 3-2:1.0 (config #1, interface 0)
/usr/src/linux-2.6.git/drivers/usb/core/inode.c: creating file '002'
hub 4-0:1.0: state 7 ports 5 chg 0000 evt 0000
hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000
hub 5-0:1.0: state 7 ports 5 chg 0000 evt 0002
ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [0] = 0x00010101 CSC PPS CCS
hub 5-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
sr 4:0:0:0: Attached scsi generic sg2 type 5
scsi 8:0:0:0: CD-ROM            TSSTcorp CD/DVDW SH-S182D SB05 PQ: 0 ANSI: 5
sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
sr 8:0:0:0: Attached scsi CD-ROM sr1
sr 8:0:0:0: Attached scsi generic sg3 type 5
hub 5-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
ohci_hcd 0000:00:13.0: port[0] reset timeout, stat 00000111
ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
usb 5-1: new full speed USB device using ohci_hcd and address 2
EXT4-fs (sda2): INFO: recovery required on readonly filesystem
EXT4-fs (sda2): write access will be enabled during recovery
ohci_hcd 0000:00:13.0: port[0] reset timeout, stat 00000113
ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
usb 5-1: default language 0x0409
usb 5-1: udev 2, busnum 5, minor = 513
usb 5-1: New USB device found, idVendor=067b, idProduct=2303
usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1: Product: USB-Serial Controller
usb 5-1: Manufacturer: Prolific Technology Inc.
usb 5-1: usb_probe_device
usb 5-1: configuration #1 chosen from 1 choice
usb 5-1: adding 5-1:1.0 (config #1, interface 0)
/usr/src/linux-2.6.git/drivers/usb/core/inode.c: creating file '002'
hub 8-0:1.0: state 7 ports 4 chg 0000 evt 0000
hub 7-0:1.0: state 7 ports 4 chg 0000 evt 0000
hub 2-0:1.0: state 7 ports 5 chg 0000 evt 0002
hub 1-5:1.0: state 7 ports 4 chg 0002 evt 0000
hub 1-5:1.0: port 1, status 0101, change 0000, 12 Mb/s
hub 1-5:1.0: port 1 not reset yet, waiting 10ms
EXT4-fs (sda2): recovery complete
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) readonly on device 8:2.
Freeing unused kernel memory: 440k freed
usb 1-5.1: new full speed USB device using ehci_hcd and address 3
hub 1-5:1.0: port 1 not reset yet, waiting 10ms
ohci_hcd 0000:00:14.5: auto-stop root hub
usb 1-5.1: ep0 maxpacket = 8
usb 1-5.1: default language 0x0409
usb 1-5.1: udev 3, busnum 1, minor = 2
usb 1-5.1: New USB device found, idVendor=046d, idProduct=0b02
usb 1-5.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5.1: Product: Logitech BT Mini-Receiver
usb 1-5.1: Manufacturer: Logitech
usb 1-5.1: usb_probe_device
usb 1-5.1: configuration #1 chosen from 1 choice
usb 1-5.1: adding 1-5.1:1.0 (config #1, interface 0)
hub 1-5.1:1.0: usb_probe_interface
hub 1-5.1:1.0: usb_probe_interface - got id
hub 1-5.1:1.0: USB hub found
hub 1-5.1:1.0: 3 ports detected
hub 1-5.1:1.0: compound device; port removable status: RFF
hub 1-5.1:1.0: ganged power switching
hub 1-5.1:1.0: global over-current protection
hub 1-5.1:1.0: power on to power good time: 100ms
hub 1-5.1:1.0: hub controller current requirement: 100mA
hub 1-5.1:1.0: 100mA bus power budget for each child
hub 1-5.1:1.0: no over-current condition exists
hub 1-5.1:1.0: enabling power on all ports
/usr/src/linux-2.6.git/drivers/usb/core/inode.c: creating file '003'
hub 5-0:1.0: state 7 ports 5 chg 0000 evt 0002
hub 1-5.1:1.0: port 2: status 0101 change 0001
hub 1-5.1:1.0: port 3: status 0101 change 0001
usb 1-5.1: link qh128-0e01/ffff88022ef28880 start 2 [1/2 us]
hub 1-5.1:1.0: state 7 ports 3 chg 000c evt 0000
hub 1-5.1:1.0: port 2, status 0101, change 0000, 12 Mb/s
usb 1-5.1.2: new full speed USB device using ehci_hcd and address 4
usb 1-5.1.2: ep0 maxpacket = 8
usb 1-5.1.2: skipped 1 descriptor after interface
usb 1-5.1.2: default language 0x0409
usb 1-5.1.2: udev 4, busnum 1, minor = 3
usb 1-5.1.2: New USB device found, idVendor=046d, idProduct=c70b
usb 1-5.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-5.1.2: Product: Logitech BT Mini-Receiver
usb 1-5.1.2: Manufacturer: Logitech
usb 1-5.1.2: SerialNumber: 00076146494E
usb 1-5.1.2: usb_probe_device
usb 1-5.1.2: configuration #1 chosen from 1 choice
usb 1-5.1.2: adding 1-5.1.2:1.0 (config #1, interface 0)
usbhid 1-5.1.2:1.0: usb_probe_interface
usbhid 1-5.1.2:1.0: usb_probe_interface - got id
input: Logitech Logitech BT Mini-Receiver as /devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5.1/1-5.1.2/1-5.1.2:1.0/input/input3
usb 1-5.1.2: link qh8-0e01/ffff88022ef28780 start 3 [1/2 us]
generic-usb 0003:046D:C70B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech Logitech BT Mini-Receiver] on usb-0000:00:12.2-5.1.2/input0
/usr/src/linux-2.6.git/drivers/usb/core/inode.c: creating file '004'
hub 1-5.1:1.0: 302mA power budget left
hub 1-5.1:1.0: port 3, status 0101, change 0000, 12 Mb/s
usb 1-5.1.3: new full speed USB device using ehci_hcd and address 5
hub 1-5.1:1.0: port 3 not reset yet, waiting 10ms
firewire_net: firewire0: IPv4 over FireWire on device 005f3f8f006cf049
firewire_core: refreshed device fw0
usb 1-5.1: khubd timed out on ep0out len=0/0
udev[1138]: starting version 164
hub 4-0:1.0: hub_suspend
usb usb4: bus auto-suspend
ohci_hcd 0000:00:12.0: suspend root hub
hub 6-0:1.0: hub_suspend
usb usb6: bus auto-suspend
ohci_hcd 0000:00:14.5: suspend root hub
uas 3-2:1.0: usb_probe_interface
uas 3-2:1.0: usb_probe_interface - got id
usb 3-2: selecting invalid altsetting 1
usbcore: registered new interface driver uas
usbcore: registered new interface driver usbserial
usbserial: USB Serial Driver core
Initializing USB Mass Storage driver...
usb-storage 3-2:1.0: usb_probe_interface
usb-storage 3-2:1.0: usb_probe_interface - got id
scsi10 : usb-storage 3-2:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
USB Serial support registered for pl2303
pl2303 5-1:1.0: usb_probe_interface
pl2303 5-1:1.0: usb_probe_interface - got id
pl2303 5-1:1.0: pl2303 converter detected
usb 5-1: pl2303 converter now attached to ttyUSB0
usbcore: registered new interface driver pl2303
pl2303: Prolific PL2303 USB to serial adaptor driver
hub 8-0:1.0: hub_suspend
usb usb8: bus auto-suspend
hub 7-0:1.0: hub_suspend
usb usb7: bus auto-suspend
ohci_hcd 0000:00:16.0: suspend root hub
hub 2-0:1.0: hub_suspend
usb usb2: bus auto-suspend
ehci_hcd 0000:00:13.2: suspend root hub
scsi 10:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
scsi 10:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
scsi 10:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
scsi 10:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
sd 10:0:0:0: Attached scsi generic sg4 type 0
sd 10:0:0:1: Attached scsi generic sg5 type 0
sd 10:0:0:2: Attached scsi generic sg6 type 0
sd 10:0:0:3: Attached scsi generic sg7 type 0
sd 10:0:0:0: [sdc] Attached SCSI removable disk
sd 10:0:0:1: [sdd] Attached SCSI removable disk
sd 10:0:0:2: [sde] Attached SCSI removable disk
sd 10:0:0:3: [sdf] Attached SCSI removable disk
usb 1-5.1.3: khubd timed out on ep0out len=0/0
usb 1-5.1.3: khubd timed out on ep0out len=0/0
usb 1-5.1.3: device not accepting address 5, error -110
usb 1-5: clear tt buffer port 1, a3 ep0 t00000000
usb 1-5.1: khubd timed out on ep0out len=8/0
hub 1-5.1:1.0: cannot disable port 3 (err = -110)
usb 1-5.1: khubd timed out on ep0out len=0/0
hub 1-5.1:1.0: cannot reset port 3 (err = -110)
hub 1-5.1:1.0: port 3 not enabled, trying reset again...
usb 1-5: kworker/2:1 timed out on ep0out len=0/0
usb 1-5: clear tt 1 (0030) error -110
usb 1-5.1: khubd timed out on ep0out len=0/0
hub 1-5.1:1.0: cannot reset port 3 (err = -110)
hub 1-5.1:1.0: port 3 not enabled, trying reset again...
usb 1-5.1: khubd timed out on ep0out len=0/0
hub 1-5.1:1.0: cannot reset port 3 (err = -110)
hub 1-5.1:1.0: port 3 not enabled, trying reset again...
usb 1-5.1: khubd timed out on ep0out len=0/0
hub 1-5.1:1.0: cannot reset port 3 (err = -110)
hub 1-5.1:1.0: port 3 not enabled, trying reset again...
usb 1-5.1: khubd timed out on ep0out len=0/0
hub 1-5.1:1.0: cannot reset port 3 (err = -110)
hub 1-5.1:1.0: port 3 not enabled, trying reset again...
hub 1-5.1:1.0: Cannot enable port 3.  Maybe the USB cable is bad?
usb 1-5.1: khubd timed out on ep0out len=0/0
hub 1-5.1:1.0: cannot disable port 3 (err = -110)
usb 1-5.1: khubd timed out on ep0out len=0/0
hub 1-5.1:1.0: cannot reset port 3 (err = -110)
hub 1-5.1:1.0: port 3 not enabled, trying reset again...
usb 1-5.1: khubd timed out on ep0out len=0/0
hub 1-5.1:1.0: cannot reset port 3 (err = -110)
hub 1-5.1:1.0: port 3 not enabled, trying reset again...
usb 1-5.1: khubd timed out on ep0out len=0/0
hub 1-5.1:1.0: cannot reset port 3 (err = -110)
hub 1-5.1:1.0: port 3 not enabled, trying reset again...
usb 1-5.1: khubd timed out on ep0out len=0/0
hub 1-5.1:1.0: cannot reset port 3 (err = -110)
hub 1-5.1:1.0: port 3 not enabled, trying reset again...
usb 1-5.1: khubd timed out on ep0out len=0/0
hub 1-5.1:1.0: cannot reset port 3 (err = -110)
hub 1-5.1:1.0: port 3 not enabled, trying reset again...
hub 1-5.1:1.0: Cannot enable port 3.  Maybe the USB cable is bad?
usb 1-5.1: khubd timed out on ep0out len=0/0
hub 1-5.1:1.0: cannot disable port 3 (err = -110)
usb 1-5.1: khubd timed out on ep0out len=0/0
hub 1-5.1:1.0: cannot reset port 3 (err = -110)
hub 1-5.1:1.0: port 3 not enabled, trying reset again...
usb 1-5.1: khubd timed out on ep0out len=0/0
hub 1-5.1:1.0: cannot reset port 3 (err = -110)
hub 1-5.1:1.0: port 3 not enabled, trying reset again...
usb 1-5.1: khubd timed out on ep0out len=0/0
hub 1-5.1:1.0: cannot reset port 3 (err = -110)
hub 1-5.1:1.0: port 3 not enabled, trying reset again...
usb 1-5.1: khubd timed out on ep0out len=0/0
hub 1-5.1:1.0: cannot reset port 3 (err = -110)
hub 1-5.1:1.0: port 3 not enabled, trying reset again...
usb 1-5.1: khubd timed out on ep0out len=0/0
hub 1-5.1:1.0: cannot reset port 3 (err = -110)
hub 1-5.1:1.0: port 3 not enabled, trying reset again...
hub 1-5.1:1.0: Cannot enable port 3.  Maybe the USB cable is bad?
usb 1-5.1: khubd timed out on ep0out len=0/0
hub 1-5.1:1.0: cannot disable port 3 (err = -110)
hub 1-5.1:1.0: unable to enumerate USB device on port 3
usb 1-5.1: khubd timed out on ep0out len=0/0
hub 1-5.1:1.0: cannot disable port 3 (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
EXT4-fs (sda2): warning: maximal mount count reached, running e2fsck is recommended
EXT4-fs (sda2): re-mounted. Opts: (null)
EXT4-fs (sda3): warning: maximal mount count reached, running e2fsck is recommended
EXT4-fs (sda3): recovery complete
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
usb 1-5.1: khubd timed out on ep0in len=0/4
NTFS driver 2.1.29 [Flags: R/W DEBUG MODULE].
NTFS volume version 3.1.
NTFS-fs warning (device sda4): load_system_files(): Unsupported volume flags 0x4000 encountered.
NTFS-fs error (device sda4): load_system_files(): Volume has unsupported flags set.  Mounting read-only.  Run chkdsk and mount in Windows.
EXT2-fs (sdb1): warning: mounting unchecked fs, running e2fsck is recommended
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
Adding 2097144k swap on /dev/loop0.  Priority:-1 extents:1 across:2097144k 
r8169 0000:03:00.0: eth0: link up
r8169 0000:03:00.0: eth0: link up
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
sshd (2252): /proc/2252/oom_adj is deprecated, please use /proc/2252/oom_score_adj instead.
usb 1-5.1: khubd timed out on ep0in len=0/4
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
eth0: no IPv6 routers present
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb usb4: usb auto-resume
ohci_hcd 0000:00:12.0: resume root hub
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 4-0:1.0: hub_resume
usb usb8: usb auto-resume
hub 8-0:1.0: hub_resume
usb usb2: usb auto-resume
ehci_hcd 0000:00:13.2: resume root hub
hub 2-0:1.0: hub_resume
usb usb6: usb auto-resume
ohci_hcd 0000:00:14.5: resume root hub
hub 6-0:1.0: hub_resume
usb usb7: usb auto-resume
ohci_hcd 0000:00:16.0: resume root hub
hub 7-0:1.0: hub_resume
usb 1-5.1: khubd timed out on ep0in len=0/4
ohci_hcd 0000:00:12.0: auto-stop root hub
ohci_hcd 0000:00:14.5: auto-stop root hub
ohci_hcd 0000:00:16.0: auto-stop root hub
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 4-0:1.0: state 7 ports 5 chg 0000 evt 0000
hub 8-0:1.0: state 7 ports 4 chg 0000 evt 0000
hub 2-0:1.0: state 7 ports 5 chg 0000 evt 0000
hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000
hub 7-0:1.0: state 7 ports 4 chg 0000 evt 0000
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 4-0:1.0: hub_suspend
usb usb4: bus auto-suspend
ohci_hcd 0000:00:12.0: suspend root hub
hub 8-0:1.0: hub_suspend
usb usb8: bus auto-suspend
hub 2-0:1.0: hub_suspend
usb usb2: bus auto-suspend
ehci_hcd 0000:00:13.2: suspend root hub
hub 6-0:1.0: hub_suspend
usb usb6: bus auto-suspend
ohci_hcd 0000:00:14.5: suspend root hub
hub 7-0:1.0: hub_suspend
usb usb7: bus auto-suspend
ohci_hcd 0000:00:16.0: suspend root hub
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
hub 1-5.1:1.0: hub_port_status failed (err = -110)
hub 1-5.1:1.0: state 7 ports 3 chg 0000 evt 0008
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4
usb 1-5.1: khubd timed out on ep0in len=0/4