Hi,
Pavankumar Kondeti a écrit :
diff --git a/drivers/usb/gadget/msm72k_udc.c b/drivers/usb/gadget/msm72k_udc.c
new file mode 100644
index 0000000..3fa4192
--- /dev/null
+++ b/drivers/usb/gadget/msm72k_udc.c
+
+static unsigned ulpi_read(struct usb_info *ui, unsigned reg)
+{
+ unsigned timeout = 100000;
+
+ /* initiate read operation */
+ writel(ULPI_RUN | ULPI_READ | ULPI_ADDR(reg),
+ USB_ULPI_VIEWPORT);
+
+ /* wait for completion */
+ while ((readl(USB_ULPI_VIEWPORT) & ULPI_RUN) && (--timeout))
+ ;
+
+ if (timeout == 0) {
+ dev_err(&ui->pdev->dev, "ulpi_read: timeout %08x\n",
+ readl(USB_ULPI_VIEWPORT));
+ return 0xffffffff;
+ }
+ return ULPI_DATA_READ(readl(USB_ULPI_VIEWPORT));
+}
+
+static int ulpi_write(struct usb_info *ui, unsigned val, unsigned reg)
+{
+ unsigned timeout = 10000;
+
+ /* initiate write operation */
+ writel(ULPI_RUN | ULPI_WRITE |
+ ULPI_ADDR(reg) | ULPI_DATA(val),
+ USB_ULPI_VIEWPORT);
+
+ /* wait for completion */
+ while ((readl(USB_ULPI_VIEWPORT) & ULPI_RUN) && (--timeout))
+ ;
+
+ if (timeout == 0) {
+ dev_err(&ui->pdev->dev, "ulpi_write: timeout\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+static void ulpi_init(struct usb_info *ui)
+{
+ int *seq = ui->phy_init_seq;
+
+ if (!seq)
+ return;
+
+ while (seq[0] >= 0) {
+ dev_vdbg(&ui->pdev->dev, "ulpi: write 0x%02x to 0x%02x\n",
+ seq[0], seq[1]);
+ ulpi_write(ui, seq[0], seq[1]);
+ seq += 2;
+ }
+}
+
--- /dev/null
+++ b/drivers/usb/otg/msm72k_otg.c
+
+#define ULPI_IO_TIMEOUT_USEC (10 * 1000)
+static int ulpi_read(struct otg_transceiver *otg, u32 reg)
+{
+ int cnt = 0;
+
+ /* initiate read operation */
+ writel(ULPI_RUN | ULPI_READ | ULPI_ADDR(reg),
+ USB_ULPI_VIEWPORT);
+
+ /* wait for completion */
+ while (cnt < ULPI_IO_TIMEOUT_USEC) {
+ if (!(readl(USB_ULPI_VIEWPORT) & ULPI_RUN))
+ break;
+ udelay(1);
+ cnt++;
+ }
+
+ if (cnt >= ULPI_IO_TIMEOUT_USEC) {
+ dev_err(otg->dev, "ulpi_read: timeout %08x\n",
+ readl(USB_ULPI_VIEWPORT));
+ return -ETIMEDOUT;
+ }
+ return ULPI_DATA_READ(readl(USB_ULPI_VIEWPORT));
+}
+
+static int ulpi_write(struct otg_transceiver *otg, u32 val, u32 reg)
+{
+ int cnt = 0;
+
+ /* initiate write operation */
+ writel(ULPI_RUN | ULPI_WRITE |
+ ULPI_ADDR(reg) | ULPI_DATA(val),
+ USB_ULPI_VIEWPORT);
+
+ /* wait for completion */
+ while (cnt < ULPI_IO_TIMEOUT_USEC) {
+ if (!(readl(USB_ULPI_VIEWPORT) & ULPI_RUN))
+ break;
+ udelay(1);
+ cnt++;
+ }
+
+ if (cnt >= ULPI_IO_TIMEOUT_USEC) {
+ dev_err(otg->dev, "ulpi_write: timeout\n");
+ return -ETIMEDOUT;
+ }
+ return 0;
+}
+
+static struct otg_io_access_ops msm_otg_io_ops = {
+ .read = ulpi_read,
+ .write = ulpi_write,
+};
+
+static void ulpi_init(struct msm_otg *motg)
+{
+ struct msm_otg_platform_data *pdata = motg->pdata;
+ int *seq = pdata->phy_init_seq;
+
+ if (!seq)
+ return;
+
+ while (seq[0] >= 0) {
+ dev_vdbg(motg->otg.dev, "ulpi: write 0x%02x to 0x%02x\n",
+ seq[0], seq[1]);
+ ulpi_write(&motg->otg, seq[0], seq[1]);
+ seq += 2;
+ }
+}
can't you share the ulpi fonctions from udc and otg ?
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
