RE: [PATCH 9/9 v3] usb : musb: Offmode fix for idle path

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




>-----Original Message-----
>From: Kevin Hilman [mailto:khilman@xxxxxxxxxxxxxxxxxxx]
>Sent: Tuesday, September 28, 2010 9:14 PM
>To: Kalliguddi, Hema
>Cc: linux-omap@xxxxxxxxxxxxxxx; linux-usb@xxxxxxxxxxxxxxx;
>Mankad, Maulik Ojas; Balbi, Felipe; Tony Lindgren; Cousson,
>Benoit; Paul Walmsley
>Subject: Re: [PATCH 9/9 v3] usb : musb: Offmode fix for idle path
>
>"Kalliguddi, Hema" <hemahk@xxxxxx> writes:
>
>>>-----Original Message-----
>>>From: Kevin Hilman [mailto:khilman@xxxxxxxxxxxxxxxxxxx]
>>>Sent: Tuesday, September 28, 2010 12:27 AM
>>>To: Kalliguddi, Hema
>>>Cc: linux-omap@xxxxxxxxxxxxxxx; linux-usb@xxxxxxxxxxxxxxx;
>>>Mankad, Maulik Ojas; Balbi, Felipe; Tony Lindgren; Cousson,
>>>Benoit; Paul Walmsley
>>>Subject: Re: [PATCH 9/9 v3] usb : musb: Offmode fix for idle path
>>>
>>>"Kalliguddi, Hema" <hemahk@xxxxxx> writes:
>>>
>>>>>-----Original Message-----
>>>>>From: Kevin Hilman [mailto:khilman@xxxxxxxxxxxxxxxxxxx]
>>>>>Sent: Saturday, September 25, 2010 1:12 AM
>>>>>To: Kalliguddi, Hema
>>>>>Cc: linux-omap@xxxxxxxxxxxxxxx; linux-usb@xxxxxxxxxxxxxxx;
>>>>>Mankad, Maulik Ojas; Balbi, Felipe; Tony Lindgren; Cousson,
>>>>>Benoit; Paul Walmsley
>>>>>Subject: Re: [PATCH 9/9 v3] usb : musb: Offmode fix for idle path
>>>>>
>>>>>Hema HK <hemahk@xxxxxx> writes:
>>>>>
>>>>>> With OMAP core-off support musb was not functional as
>>>>>context was getting
>>>>>> lost after wakeup from core-off.
>>>>>
>>>>>This should be a separate patch.
>>>>>
>>>>
>>>> Let me give the description of the musb offmode support in
>>>the idle path.
>>>
>>>The detail you provided below is very good, and this is the level of
>>>detail that needs to go into the changelogs.
>>>
>>>> With the current mainline code, offmode in the idle path is
>>>not supported with usb.
>>>> When the core hits off and wakes up the musb will not be
>functional.
>>>> This patch is to support the musb functionality with offmode
>>>enabled in the idle path.
>>>
>>>OK, what about the PM branch.  I was under the impression
>that offmode
>>>was working fine in the PM branch.
>>>
>> In current PM branch, the core hits retention and off mode
>without usb drive loaded.
>> Once after loading the musb driver it may not retention/off
>also as the driver is
>> configuring musb in smart idle/standby. Even if it hits
>retention/off as it might
>> work sometimes,MUSB is not functional.because there is no
>context save/restore
>> done in the driver.
>>
>>>And, looking at the  PM branch, the only thing done in the
>idle path is
>>>the disable of autoidle upon wakeup.  Everything else (context
>>>save/restore etc.) is done in the driver.
>>>
>> No.There is no context save/restore done in the driver today.
>
>There is, just not in the idle path as you pointed out.
>
>The point of all this is that the changelog and documentation is not
>clear (at least to me) about all these details save/restore in idle, or
>in suspend/resume etc., and why the result is different (or needs to be
>different) from the current code.
>

There is no difference in the settings or the result in the idle path or global
suspend/resume path.

GLOBAL SUSPEND/RESUME:
-------------------------
In the current PM line,  musb is configured to force idle and forcestandby
mode by default when the device is registered.
When there is no driver loaded, theere is no issue, core hits retention/offmode.

When the musb driver is loaded, it configures it into smart idle/standby mode.
So when pm_ops .suspend/resume apis are called during global suspend/resume,
context save/restore and clock disable/enable is happening, the observation is that
sometimes, the core hits retention/offmode, but not consistently.
The recomandation from the ip team to configure it to force idle/standby mode when
device is not used.
For the global suspend/resume, this is being achieved by setting the oh flags
(HWMOD_SWSUP_SIDLE and HWMOD_SWSUP_MSTANDBY)in the hwmod data structure for OMAP2
OMAP3 and OMAP4.Description of why these flags are needed are mentioned in the
respective patches.
By calling runtime put_sync and get_sync apis in the driver pm_ops .suspend/resume
will configure the musb in the required mode and save/restore the context is taken
care in the runtime_suspend/resume hooks.
This change is done in the  [PATCH 8/9 v3] usb : musb: Using runtime pm apis for musb.

IDLE PATH RRETENTION/OFFMODE SUPPORT:
-------------------------------------
The current pm line musb is not functional when the core hits offmode and wakesup.
This patch is to support offmode/retention with musb functional.
This patch has only the required changes for supporting the musb with with idle
path offmode.

This patch is only for supporting offmode with musb in the idle path. No other
changes as part of this patch.

>>>> Below are the requirements to support retention and offmode
>>>of OMAP in idle path with usb enabled
>>>> During idle and when there is no activity on the bus:
>>>>
>>>> 1.Since there is no hardware context save/restore supported
>>>in OMAP for musb, software
>>>> has to save the context.
>>>> 2.Configure the musb in force idle/standby mode during idle mode
>>>
>>>This needs more detailed description (TRM reference, etc.)
>>>
>> I have provided the link to the public TRM and I had refered
>to the exact section
>> of the TRM sometime in the older version the patches, when
>Benoit and you had asked
>> for the description.
>
>The TRM reference and detailed description in the code and in the
>changelog that introduces this feature.
>
>>>> 3.May or may not disable the interface clock(as interface
>>>clock is autogated)
>>>> and the functional clock is from ULPI phy on triton chip.
>>>>
>>>> When OMAP awakes:
>>>>
>>>> 1.enable the clock if it is disabled.and
>>>> 2.Configure it back to no idle/standby or smart idle/standby
>>>after wakeup.
>>>
>>>In the PM branch, this part is done in idle.
>>>
>> I only see the disable autoidle bit function the idle path
>in pm branch.
>> There is no code for setting the no idle/standby or smart
>idle/standby bits
>> in the idle path.
>
>Exactly.
>
>So, in a separate patch, please describe in detail which parts need to
>be done in suspend/resume and which parts need to be done in idle and
>which parts need to be done in both.  And please explain why.
>
>As I mentioned in my original comments, this patch mixes many unrelated
>changes together into a single patch called 'offmode fix'.
>
>Kevin
>
>
>>>> 3.Restore the context back.
>>>
>>>But this is done by the driver.
>>>
>> No. current driver is not doing any context save/restore.
>>
>>>> Idling of device can be done when there is no activity on
>>>the bus by using the pm_runtime_put_sync
>>>n> apis in when device disconnects or suspends, but resuming
>>>has to done as soon as the omap is wokenup from
>>>> retention or core off, as we have to put back the musb in
>>>known state ie restore the conext atleast
>>>> enabling D+/D- lines,enabling interrupts and configuring the
>>>no idle/standby or smart idle/standby
>>>> to even capture the irqs. Otherwise we will not be able to
>>>capture the musb connect/reset or resume/remote
>>>> wakeup events as D+/D- lines will disabled when the context
>>>is lost duribg offmode.
>>>>
>>>> If I use the pm_runtime_put_sync in disconnect/suspend
>>>handler when device suspends/disconnects
>>>> and use pm_runtime_get_sync when OMAP wakesup, then there
>>>will be mismatch in the usecount.
>>>>
>>>> We could have achieved the same by using the triton
>>>connect/disconnect events to idle/resume musb,
>>>> but some of the phys do not support the connect/disconnect events.
>>>>
>>>> So cameup with the design of idling musb device in idle loop
>>>and resume once the OMAP wakes up.
>>>> All this done onl when the musb is not active.
>>>
>>>Rather than seeing more work done in the idle path, I would rather be
>>>moving code out of the idle path.
>>>
>>>Did you consider using a (deferrable) timer during no-activity times
>>>which periodically checks to be sure the IP is in force idle/standby?
>>>
>>>> Since the IDLE REQ/ACK protocol is broken, the
>>>recommendation from ip team is to
>>>> configure the musb in force idle/standby during omap
>>>retention and offmode.
>>>
>>>Yes, this is in the PM branch and there is an errata number for it
>>>there.  Please reference that errata when implementing this feature
>>>(both in the changelog and in the code.)
>>>
>>>Kevin
>>>
>>>> Since we have to touch the sysconfig registers and context
>>>save/restore everytime,
>>>> I am using the runtime pm apis.
>>>>
>>>>>> And also musb was blocking the core-off after loading the gadget
>>>>>> driver even with no cable connected sometimes.
>>>>>
>>>>>this too

There is no changes done in this patch for this. This is taken care of by using oh flags
in the respective hwmod data structure addition patches.
I will remove this changelog from this patch.

>>>>>
>>>>>> Added the idle and wakeup APIs in the platform layer which will
>>>>>> be called in the idle and wakeup path.
>>>>>
>>>>>And this errata fix should be a separate patch, with
>reference to the
>>>>>errata etc.
>>>>>
>>>> This is not an errata, this is requirement from the ip. it
>>>is mentioned in
>>>> the functional spec that when device is not use put it in
>>>force idle/standby mode.
>>>>
>>>>
>>>>>> Used the pm_runtime_put_sysc API to configure the
>>>>>> musb to force idle/standby modes, saving the context and
>>>>>disable the clk in
>>>>>> while idling if there is no activity on the usb bus.
>>>>>
>>>>>Why?  This should not be part of the idle path.
>>>>>
>>>>
I hope I have answered this in my previous description.
>>>>
>>>>>If there is no activity on the bus, why hasn't the musb
>>>driver already
>>>>>runtime suspended itself?
>>>>>
>>>>>If the driver want's to runtime_suspend itself based on
>>>inactivity, it
>>>>>should use an inactivity timer, not hook into the idle loop.   The
>>>>>runtime PM API has a function for a deferred suspend
>>>>>
>>>>>    int pm_schedule_suspend(struct device *dev, unsigned int delay)
>>>>>
>>>>>The only thing in the idle loop in the current code is the
>>>errata fix,
>>>>>and even that I'm not sure I'm ready to merge.
>>>>>
>>>>>I'd really like to see even the errata fix out of the idle
>>>>>path.   I wonder if usb-musb.c could create a periodic,
>>>>>deferrable timer
>>>>>to fire that ensure that autoidle is disabled.
>>>>>
>>>>>> Used the pm_runtime_get_sync API to configure the musb to
>>>>>> no idle/standby modes, enable the clock and restore the context
>>>>>> after wakeup when there is no activity on the usb bus.
>>>>>
>>>>>Why would you wakeup MUSB in the idle path if there is no
>activity on
>>>>>the bus?
>>>>>
>>>> This is because MUSB has to be in known good state to
>>>capture any musb interrupts.
>>>>
>>>>>I don't understand the motiviation or these last two
>>>changes, and they
>>>>>are a departure from the behavior of the previous code.
>>>>>
>>>> Can you please let mw know which 2 changes you reering to?
>>>> You mean assing function to check whether the device is active
>>>> and adding 2 flags for conext save/restore?
>>>>
>>>>>At a minimum, they should be separated into a separate patch, and
>>>>>thoroughly described, including an answer to "why?"
>>>>>
>>>>>Kevin
>>>>>
>>>>>> Signed-off-by: Hema HK <hemahk@xxxxxx>
>>>>>> Signed-off-by: Maulik Mankad <x0082077@xxxxxx>
>>>>>> Cc: Felipe Balbi <balbi@xxxxxx>
>>>>>> Cc: Tony Lindgren <tony@xxxxxxxxxxx>
>>>>>> Cc: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
>>>>>> Cc: Cousson, Benoit <b-cousson@xxxxxx>
>>>>>> Cc: Paul Walmsley <paul@xxxxxxxxx>
>>>>>>
>>>>>> ---
>>>>>>  arch/arm/mach-omap2/cpuidle34xx.c     |    1
>>>>>>  arch/arm/mach-omap2/pm34xx.c          |    3
>>>>>>  arch/arm/mach-omap2/usb-musb.c        |  107
>>>>>++++++++++++++++++++++++++++++++++
>>>>>>  arch/arm/plat-omap/include/plat/usb.h |    2
>>>>>>  drivers/usb/musb/musb_core.c          |   15 ++++
>>>>>>  drivers/usb/musb/omap2430.c           |   14 ++++
>>>>>>  include/linux/usb/musb.h              |    9 ++
>>>>>>  7 files changed, 149 insertions(+), 2 deletions(-)
>>>>>>
>>>>>> Index: linux-omap-pm/arch/arm/mach-omap2/cpuidle34xx.c
>>>>>>
>===================================================================
>>>>>> --- linux-omap-pm.orig/arch/arm/mach-omap2/cpuidle34xx.c
>>>>>> +++ linux-omap-pm/arch/arm/mach-omap2/cpuidle34xx.c
>>>>>> @@ -31,6 +31,7 @@
>>>>>>  #include <plat/clockdomain.h>
>>>>>>  #include <plat/control.h>
>>>>>>  #include <plat/serial.h>
>>>>>> +#include <plat/usb.h>
>>>>>>
>>>>>>  #include "pm.h"
>>>>>>
>>>>>> Index: linux-omap-pm/arch/arm/mach-omap2/pm34xx.c
>>>>>>
>===================================================================
>>>>>> --- linux-omap-pm.orig/arch/arm/mach-omap2/pm34xx.c
>>>>>> +++ linux-omap-pm/arch/arm/mach-omap2/pm34xx.c
>>>>>> @@ -38,6 +38,7 @@
>>>>>>  #include <plat/prcm.h>
>>>>>>  #include <plat/gpmc.h>
>>>>>>  #include <plat/dma.h>
>>>>>> +#include <plat/usb.h>
>>>>>>
>>>>>>  #include <asm/tlbflush.h>
>>>>>>
>>>>>> @@ -324,11 +325,13 @@ static void restore_table_entry(void)
>>>>>>  void omap3_device_idle(void)
>>>>>>  {
>>>>>>      omap2_gpio_prepare_for_idle();
>>>>>> +    musb_prepare_for_idle();
>>>>>>  }
>>>>>>
>>>>>>  void omap3_device_resume(void)
>>>>>>  {
>>>>>>      omap2_gpio_resume_after_idle();
>>>>>> +    musb_wakeup_from_idle();
>>>>>>  }
>>>>>>
>>>>>>  void omap_sram_idle(void)
>>>>>> Index: linux-omap-pm/arch/arm/mach-omap2/usb-musb.c
>>>>>>
>===================================================================
>>>>>> --- linux-omap-pm.orig/arch/arm/mach-omap2/usb-musb.c
>>>>>> +++ linux-omap-pm/arch/arm/mach-omap2/usb-musb.c
>>>>>> @@ -25,16 +25,21 @@
>>>>>>  #include <linux/io.h>
>>>>>>
>>>>>>  #include <linux/usb/musb.h>
>>>>>> +#include <linux/pm_runtime.h>
>>>>>>
>>>>>>  #include <mach/hardware.h>
>>>>>>  #include <mach/irqs.h>
>>>>>>  #include <plat/usb.h>
>>>>>>  #include <plat/omap_device.h>
>>>>>> +#include <plat/powerdomain.h>
>>>>>>
>>>>>>  #ifdef CONFIG_USB_MUSB_SOC
>>>>>>  static const char name[] = "musb_hdrc";
>>>>>>  #define MAX_OMAP_MUSB_HWMOD_NAME_LEN        16
>>>>>>
>>>>>> +struct omap_hwmod *oh_p;
>>>>>> +static struct powerdomain *core_pwrdm;
>>>>>> +
>>>>>>  static struct musb_hdrc_config musb_config = {
>>>>>>      .multipoint     = 1,
>>>>>>      .dyn_fifo       = 1,
>>>>>> @@ -58,6 +63,10 @@ static struct musb_hdrc_platform_data mu
>>>>>>       * "mode", and should be passed to usb_musb_init().
>>>>>>       */
>>>>>>      .power          = 50,                   /* up to 100 mA */
>>>>>> +
>>>>>> +    /* OMAP supports offmode */
>>>>>> +    .save_context   = 1,
>>>>>> +    .restore_context        = 1,
>>>>>>  };
>>>>>>
>>>>>>  static u64 musb_dmamask = DMA_BIT_MASK(32);
>>>>>> @@ -80,6 +89,7 @@ void __init usb_musb_init(struct omap_mu
>>>>>>      const char *oh_name = "usb_otg_hs";
>>>>>>      struct musb_hdrc_platform_data *pdata;
>>>>>>
>>>>>> +    core_pwrdm = pwrdm_lookup("per_pwrdm");
>>>>>>      oh = omap_hwmod_lookup(oh_name);
>>>>>>
>>>>>>      if (!oh) {
>>>>>> @@ -97,6 +107,7 @@ void __init usb_musb_init(struct omap_mu
>>>>>>      musb_plat.extvbus = board_data->extvbus;
>>>>>>
>>>>>>      pdata = &musb_plat;
>>>>>> +    oh_p = oh;
>>>>>>
>>>>>>      od = omap_device_build(name, bus_id, oh, pdata,
>>>>>>                             sizeof(struct
>musb_hdrc_platform_data),
>>>>>> @@ -115,8 +126,101 @@ void __init usb_musb_init(struct omap_mu
>>>>>>      put_device(dev);
>>>>>>  }
>>>>>>
>>>>>> +void musb_prepare_for_idle()
>>>>>> +{
>>>>>> +    int core_next_state;
>>>>>> +    struct omap_hwmod *oh = oh_p;
>>>>>> +    struct omap_device *od;
>>>>>> +    struct platform_device *pdev;
>>>>>> +    struct musb_hdrc_platform_data *pdata;
>>>>>> +    struct device *dev;
>>>>>> +
>>>>>> +    if (!core_pwrdm)
>>>>>> +            return;
>>>>>> +
>>>>>> +    core_next_state = pwrdm_read_next_pwrst(core_pwrdm);
>>>>>> +    if (core_next_state >= PWRDM_POWER_INACTIVE)
>>>>>> +            return;
>>>>>> +    if (!oh)
>>>>>> +            return;
>>>>>> +
>>>>>> +    od = oh->od;
>>>>>> +    pdev = &od->pdev;
>>>>>> +
>>>>>> +    if (!pdev)
>>>>>> +            return;
>>>>>> +    dev = &pdev->dev;
>>>>>> +
>>>>>> +    if (dev->driver) {
>>>>>> +            pdata = dev->platform_data;
>>>>>> +
>>>>>> +    if (pdata->is_usb_active)
>>>>>> +            if (!pdata->is_usb_active(dev)) {
>>>>>> +                    if (core_next_state == PWRDM_POWER_OFF) {
>>>>>> +                            pdata->save_context = 1;
>>>>>> +                            pm_runtime_put_sync(dev);
>>>>>> +                    } else if  (core_next_state ==
>>>>>PWRDM_POWER_RET) {
>>>>>> +                            pdata->save_context = 0;
>>>>>> +                            pm_runtime_put_sync(dev);
>>>>>> +                    }
>>>>>> +            }
>>>>>> +    }
>>>>>> +}
>>>>>> +
>>>>>> +void musb_wakeup_from_idle()
>>>>>> +{
>>>>>> +    int core_next_state;
>>>>>> +    int core_prev_state;
>>>>>> +    struct omap_hwmod *oh = oh_p;
>>>>>> +    struct omap_device *od;
>>>>>> +    struct platform_device *pdev;
>>>>>> +    struct device *dev;
>>>>>> +    struct musb_hdrc_platform_data *pdata;
>>>>>> +
>>>>>> +    if (!core_pwrdm)
>>>>>> +            return;
>>>>>> +
>>>>>> +    core_next_state = pwrdm_read_next_pwrst(core_pwrdm);
>>>>>> +
>>>>>> +    if (core_next_state >= PWRDM_POWER_INACTIVE)
>>>>>> +            return;
>>>>>> +     core_prev_state = pwrdm_read_prev_pwrst(core_pwrdm);
>>>>>> +
>>>>>> +     if (!oh)
>>>>>> +            return;
>>>>>> +     od = oh->od;
>>>>>> +     pdev = &od->pdev;
>>>>>> +
>>>>>> +     if (!pdev)
>>>>>> +            return;
>>>>>> +
>>>>>> +     dev = &pdev->dev;
>>>>>> +
>>>>>> +     if (dev->driver) {
>>>>>> +            pdata = dev->platform_data;
>>>>>> +
>>>>>> +            if (pdata->is_usb_active)
>>>>>> +                    if (!pdata->is_usb_active(dev)) {
>>>>>> +                            if (core_prev_state ==
>>>>>PWRDM_POWER_OFF) {
>>>>>> +                                    pdata->restore_context = 1;
>>>>>> +                                     pm_runtime_get_sync(dev);
>>>>>> +                            } else {
>>>>>> +                                     pdata->restore_context = 0;
>>>>>> +                                     pm_runtime_get_sync(dev);
>>>>>> +                            }
>>>>>> +                     }
>>>>>> +     }
>>>>>> +}
>>>>>>  #else
>>>>>>  void __init usb_musb_init(struct omap_musb_board_data
>*board_data)
>>>>>>  {
>>>>>>  }
>>>>>> +
>>>>>> +void musb_prepare_for_idle()
>>>>>> +{
>>>>>> +}
>>>>>> +
>>>>>> +void musb_wakeup_from_idle()
>>>>>> +{
>>>>>> +}
>>>>>>  #endif /* CONFIG_USB_MUSB_SOC */
>>>>>> Index: linux-omap-pm/arch/arm/plat-omap/include/plat/usb.h
>>>>>>
>===================================================================
>>>>>> --- linux-omap-pm.orig/arch/arm/plat-omap/include/plat/usb.h
>>>>>> +++ linux-omap-pm/arch/arm/plat-omap/include/plat/usb.h
>>>>>> @@ -79,6 +79,8 @@ extern void usb_ehci_init(const struct e
>>>>>>
>>>>>>  extern void usb_ohci_init(const struct
>>>>>ohci_hcd_omap_platform_data *pdata);
>>>>>>
>>>>>> +extern void musb_prepare_for_idle(void);
>>>>>> +extern void musb_wakeup_from_idle(void);
>>>>>>  #endif
>>>>>>
>>>>>>
>>>>>> Index: linux-omap-pm/drivers/usb/musb/musb_core.c
>>>>>>
>===================================================================
>>>>>> --- linux-omap-pm.orig/drivers/usb/musb/musb_core.c
>>>>>> +++ linux-omap-pm/drivers/usb/musb/musb_core.c
>>>>>> @@ -2410,6 +2410,7 @@ static int musb_suspend(struct device *d
>>>>>>      struct platform_device *pdev = to_platform_device(dev);
>>>>>>      unsigned long   flags;
>>>>>>      struct musb     *musb = dev_to_musb(&pdev->dev);
>>>>>> +    struct musb_hdrc_platform_data *plat = dev->platform_data;
>>>>>>
>>>>>>      if (!musb->clock)
>>>>>>              return 0;
>>>>>> @@ -2425,6 +2426,9 @@ static int musb_suspend(struct device *d
>>>>>>               * they will even be wakeup-enabled.
>>>>>>               */
>>>>>>      }
>>>>>> +
>>>>>> +    if (plat->save_context)
>>>>>> +            plat->save_context = 1;
>>>>>>      pm_runtime_put_sync(dev);
>>>>>>
>>>>>>  #ifndef CONFIG_PM_RUNTIME
>>>>>> @@ -2443,10 +2447,13 @@ static int musb_resume_noirq(struct devi
>>>>>>  {
>>>>>>      struct platform_device *pdev = to_platform_device(dev);
>>>>>>      struct musb     *musb = dev_to_musb(&pdev->dev);
>>>>>> +    struct musb_hdrc_platform_data *plat = dev->platform_data;
>>>>>>
>>>>>>      if (!musb->clock)
>>>>>>              return 0;
>>>>>>
>>>>>> +    if (plat->restore_context)
>>>>>> +            plat->restore_context = 1;
>>>>>>      pm_runtime_get_sync(dev);
>>>>>>
>>>>>>  #ifndef CONFIG_PM_RUNTIME
>>>>>> @@ -2468,16 +2475,20 @@ static int musb_resume_noirq(struct devi
>>>>>>  static int musb_runtime_suspend(struct device *dev)
>>>>>>  {
>>>>>>      struct musb     *musb = dev_to_musb(dev);
>>>>>> +    struct musb_hdrc_platform_data *plat = dev->platform_data;
>>>>>>
>>>>>> -    musb_save_context(musb);
>>>>>> +    if (plat->save_context)
>>>>>> +            musb_save_context(musb);
>>>>>>      return 0;
>>>>>>  }
>>>>>>
>>>>>>  static int musb_runtime_resume(struct device *dev)
>>>>>>  {
>>>>>>      struct musb     *musb = dev_to_musb(dev);
>>>>>> +    struct musb_hdrc_platform_data *plat = dev->platform_data;
>>>>>>
>>>>>> -    musb_restore_context(musb);
>>>>>> +    if (plat->restore_context)
>>>>>> +            musb_restore_context(musb);
>>>>>>      return 0;
>>>>>>  }
>>>>>>  static const struct dev_pm_ops musb_dev_pm_ops = {
>>>>>> Index: linux-omap-pm/drivers/usb/musb/omap2430.c
>>>>>>
>===================================================================
>>>>>> --- linux-omap-pm.orig/drivers/usb/musb/omap2430.c
>>>>>> +++ linux-omap-pm/drivers/usb/musb/omap2430.c
>>>>>> @@ -189,6 +189,19 @@ int musb_platform_set_mode(struct musb *
>>>>>>      return 0;
>>>>>>  }
>>>>>>
>>>>>> +int is_musb_active(struct device *dev)
>>>>>> +{
>>>>>> +    struct musb *musb;
>>>>>> +
>>>>>> +#ifdef CONFIG_USB_MUSB_HDRC_HCD
>>>>>> +    /* usbcore insists dev->driver_data is a "struct hcd *" */
>>>>>> +    musb = hcd_to_musb(dev_get_drvdata(dev));
>>>>>> +#else
>>>>>> +    musb = dev_get_drvdata(dev);
>>>>>> +#endif
>>>>>> +    return musb->is_active;
>>>>>> +}
>>>>>> +
>>>>>>  int __init musb_platform_init(struct musb *musb)
>>>>>>  {
>>>>>>      u32 l;
>>>>>> @@ -232,6 +245,7 @@ int __init musb_platform_init(struct mus
>>>>>>              musb->board_set_vbus = omap_set_vbus;
>>>>>>
>>>>>>      setup_timer(&musb_idle_timer, musb_do_idle, (unsigned
>>>>>long) musb);
>>>>>> +    plat->is_usb_active = is_musb_active;
>>>>>>
>>>>>>      return 0;
>>>>>>  }
>>>>>> Index: linux-omap-pm/include/linux/usb/musb.h
>>>>>>
>===================================================================
>>>>>> --- linux-omap-pm.orig/include/linux/usb/musb.h
>>>>>> +++ linux-omap-pm/include/linux/usb/musb.h
>>>>>> @@ -93,6 +93,8 @@ struct musb_hdrc_config {
>>>>>>
>>>>>>  };
>>>>>>
>>>>>> +struct device;
>>>>>> +
>>>>>>  struct musb_hdrc_platform_data {
>>>>>>      /* MUSB_HOST, MUSB_PERIPHERAL, or MUSB_OTG */
>>>>>>      u8              mode;
>>>>>> @@ -126,6 +128,17 @@ struct musb_hdrc_platform_data {
>>>>>>
>>>>>>      /* Architecture specific board data     */
>>>>>>      void            *board_data;
>>>>>> +
>>>>>> +    /* check usb device active state*/
>>>>>> +    int             (*is_usb_active)(struct device *dev);
>>>>>> +
>>>>>> +    /*
>>>>>> +     * Used for saving and restoring the registers only
>when core
>>>>>> +     * next state is off and previous state was off.
>>>>>> +     * Otherwise avoid save restore.
>>>>>> +     */
>>>>>> +    int             save_context;
>>>>>> +    int             restore_context;
>>>>>>  };
>>>>>>
>>>>>>
>>>>>
>>>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux