This patch (as1405) fixes a small bug in ehci-hcd's isochronous
scheduler. Not all EHCI controllers are PCI, and the code shouldn't
assume that they are. Instead, introduce a special flag for
controllers which need to delay iso scheduling for full-speed devices
beyond the scheduling threshold.
Signed-off-by: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
CC: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
CC: David Brownell <david-b@xxxxxxxxxxx>
CC: stable@xxxxxxxxxx
---
Index: usb-2.6/drivers/usb/host/ehci.h
===================================================================
--- usb-2.6.orig/drivers/usb/host/ehci.h
+++ usb-2.6/drivers/usb/host/ehci.h
@@ -130,6 +130,7 @@ struct ehci_hcd { /* one per controlle
unsigned has_amcc_usb23:1;
unsigned need_io_watchdog:1;
unsigned broken_periodic:1;
+ unsigned fs_i_thresh:1; /* Intel iso scheduling */
/* required for usb32 quirk */
#define OHCI_CTRL_HCFS (3 << 6)
Index: usb-2.6/drivers/usb/host/ehci-pci.c
===================================================================
--- usb-2.6.orig/drivers/usb/host/ehci-pci.c
+++ usb-2.6/drivers/usb/host/ehci-pci.c
@@ -114,6 +114,7 @@ static int ehci_pci_setup(struct usb_hcd
break;
case PCI_VENDOR_ID_INTEL:
ehci->need_io_watchdog = 0;
+ ehci->fs_i_thresh = 1;
if (pdev->device == 0x27cc) {
ehci->broken_periodic = 1;
ehci_info(ehci, "using broken periodic workaround\n");
Index: usb-2.6/drivers/usb/host/ehci-sched.c
===================================================================
--- usb-2.6.orig/drivers/usb/host/ehci-sched.c
+++ usb-2.6/drivers/usb/host/ehci-sched.c
@@ -1399,7 +1399,6 @@ iso_stream_schedule (
int status;
unsigned mod = ehci->periodic_size << 3;
struct ehci_iso_sched *sched = urb->hcpriv;
- struct pci_dev *pdev;
if (sched->span > (mod - SCHEDULE_SLOP)) {
ehci_dbg (ehci, "iso request %p too long\n", urb);
@@ -1426,15 +1425,14 @@ iso_stream_schedule (
* slot in the schedule, implicitly assuming URB_ISO_ASAP.
*/
if (likely (!list_empty (&stream->td_list))) {
- pdev = to_pci_dev(ehci_to_hcd(ehci)->self.controller);
start = stream->next_uframe;
/* For high speed devices, allow scheduling within the
- * isochronous scheduling threshold. For full speed devices,
- * don't. (Work around for Intel ICH9 bug.)
+ * isochronous scheduling threshold. For full speed devices
+ * and Intel PCI-based controllers, don't (work around for
+ * Intel ICH9 bug).
*/
- if (!stream->highspeed &&
- pdev->vendor == PCI_VENDOR_ID_INTEL)
+ if (!stream->highspeed && ehci->fs_i_thresh)
next = now + ehci->i_thresh;
else
next = now;
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
