Re: [PATCH resend 1/3] AM35x: Add musb support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



* Sergei Shtylyov <sshtylyov@xxxxxxxxxx> [100705 12:57]:
> Hello.
> 
> Tony Lindgren wrote:
> 
> >>AM35x has musb interface (version 1.8) and uses CPPI41 DMA engine.
> >>It has USB phy built inside the IP itself.
> >>
> >>Also added ARCH_AM35x which is required to differentiate musb ips
> >>between OMAP3x and AM35x. This config would be used for below purposes,
> >>        - Select am35x.c instead of omap2430.c for compilation
> >>          at drivers/usb/musb directory. Please note there are
> >>          significant differneces in these two files as musb ip
> >>          in quite different on AM35x.
> >>        - Select workaround codes applicable for AM35x musb issues.
> >>          one such workaround is for bytewise read issue on AM35x.
> 
> ><snip>
> 
> >>diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
> >>index b31b6f1..52a6752 100644
> >>--- a/arch/arm/mach-omap2/Kconfig
> >>+++ b/arch/arm/mach-omap2/Kconfig
> >>@@ -84,6 +84,7 @@ config MACH_OMAP3517EVM
> >> 	bool "OMAP3517/ AM3517 EVM board"
> >> 	depends on ARCH_OMAP3
> >> 	select OMAP_PACKAGE_CBB
> >>+	select ARCH_AM35x
> >> config MACH_OMAP3_PANDORA
> >> 	bool "OMAP3 Pandora"
> 
> >No thanks..
> 
> >>--- a/arch/arm/plat-omap/Kconfig
> >>+++ b/arch/arm/plat-omap/Kconfig
> >>@@ -5,6 +5,14 @@ menu "TI OMAP Implementations"
> >> config ARCH_OMAP_OTG
> >> 	bool
> >>+config ARCH_AM35x
> >>+	bool
> >>+	help
> >>+	  Select this option if your platform is based on AM35x. As
> >>+	  AM35x has an updated MUSB with CPPI4.1 DMA so this config
> >>+	  is introduced to differentiate musb ip between OMAP3x and
> >>+	  AM35x platforms.
> >>+
> >> choice
> >> 	prompt "OMAP System Type"
> >> 	default ARCH_OMAP2PLUS
> 
> >..this should not be needed.
> 
>    I think Ajay has explained why it's needed. The option is
> necessary in one or another form.

It's not needed for omaps, we can already build in support for
omap2, omap3 and omap4 into the same kernel binary.

If a Kconfig option is needed for optionally compiling in the support
for am35x musb, it should be called USB_MUSB_AM35X or similar that
gets selected if the boards using it are selected.

Regards,

Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux