Eric Miao wrote:
On Wed, Jun 2, 2010 at 3:40 PM, Igor Grinberg <grinberg@xxxxxxxxxxxxxx> wrote:
Signed-off-by: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
Signed-off-by: Mike Rapoport <mike@xxxxxxxxxxxxxx>
---
arch/arm/mach-pxa/include/mach/ohci.h | 3 +
arch/arm/mach-pxa/include/mach/regs-u2d.h | 2 +
drivers/usb/host/ohci-pxa27x.c | 183 +++++++++++++++++++++++++++++
My feeling is on pxa310, the OTG/ULPI is actually closer to the UDC, so
generally, I'd really like to see minimum change to ohci.
There are certain registers set up that should be done in order to
enable the pxa310 otg port in the host mode. I agree that most of them
should be done in the UDC driver, but since there's no UDC driver at all
for pxa310, the most logical place for those register set ups would be
pxa ohci glue driver.
--
Sincerely yours,
Mike.
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
