Call set_mctrl() and clear_mctrl() according to the flow control mode
selected. This makes serial communication for FT232 connected devices
work when CRTSCTS is not set.
This fixes a regression introduced by 4175f3e31 ("tty_port: If we are
opened non blocking we still need to raise the carrier"). This patch
calls the low-level driver's dtr_rts() function which consequently sets
TIOCM_DTR | TIOCM_RTS. A later call to set_termios() without CRTSCTS in
cflags, however, does not reset these bits, and so data is not actually
sent out on the serial wire.
Signed-off-by: Daniel Mack <daniel@xxxxxxxx>
Cc: Greg Kroah-Hartman <gregkh@xxxxxxx>
Cc: Johan Hovold <jhovold@xxxxxxxxx>
Cc: Alan Cox <alan@xxxxxxxxxxxxxxx>
Cc: linux-usb@xxxxxxxxxxxxxxx
---
drivers/usb/serial/ftdi_sio.c | 4 ++++
1 files changed, 4 insertions(+), 0 deletions(-)
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 050211a..79dd1ae 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -2005,6 +2005,8 @@ static void ftdi_set_termios(struct tty_struct *tty,
"urb failed to set to rts/cts flow control\n");
}
+ /* raise DTR/RTS */
+ set_mctrl(port, TIOCM_DTR | TIOCM_RTS);
} else {
/*
* Xon/Xoff code
@@ -2052,6 +2054,8 @@ static void ftdi_set_termios(struct tty_struct *tty,
}
}
+ /* lower DTR/RTS */
+ clear_mctrl(port, TIOCM_DTR | TIOCM_RTS);
}
return;
}
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
