On Wed, 17 Mar 2010, Miika Keskinen wrote: > Hi, > > I'm toying with net2272 and g_file_storage. My Intention is to boot a > x86 machine from file_storage gadget. Some machines do boot fine and > other won't (they do boot from an usb-stick anyways and if booted up, > the file_storage does function just fine). Usb_msc_boot_1.0.pdf section > 4.1.1 (flexible disk mode page) does state that: > > -- > Support for the Flexible Disk Mode Page is required for all devices with > a Peripheral Device Type other > than 05h. The FDMP provides the geometry that is necessary for > translating a CHS address to a SCSI > standard logical block address. > -- > > I haven't have time yet to implement that into a file_storage and see if > it makes a difference, but I'm asking if any of you have had similar > problems and/or have some ideas what might be wrong? You can get more information about what's going wrong if you enable verbose debugging in file_storage.c (uncomment the #define near the start of the file). Then you'll be able to see if the gadget receives a MODE SENSE command for that page. Alan Stern -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
