Hello Libin, Nope, no system hang, the only symptom is that the device is not working, (v4l application seems to wait for video frames but they do not arrive). - Sander Monday, March 15, 2010, 4:05:39 AM, you wrote: > On Sat, 2010-03-13 at 12:01 +0100, Sander Eikelenboom wrote: >> The patches applied cleanly, but the device doesn't work yet. >> complete dmesg and lsusb -vvv attached. > Thanks for reporting the issue. We will look into the issue. From the > description, it seems the initialization has passed, right? What's the > symptom? Does the system hang? >> >> Highlights from dmesg: >> >> [ 1.738043] usb 9-3: skipped 4 descriptors after interface >> [ 1.738045] usb 9-3: skipped 2 descriptors after interface >> [ 1.738048] usb 9-3: skipped 1 descriptor after endpoint >> [ 1.738050] usb 9-3: skipped 2 descriptors after interface >> [ 1.738053] usb 9-3: skipped 1 descriptor after endpoint >> [ 1.738055] usb 9-3: skipped 2 descriptors after interface >> [ 1.738057] usb 9-3: skipped 1 descriptor after endpoint >> [ 1.738059] usb 9-3: skipped 2 descriptors after interface >> [ 1.738061] usb 9-3: skipped 1 descriptor after endpoint >> [ 1.741021] xhci_hcd 0000:03:00.0: WARN: short transfer on control ep >> [ 1.742039] usb 9-3: default language 0x0409 >> [ 1.765016] xhci_hcd 0000:03:00.0: WARN: short transfer on control ep >> [ 1.766036] usb 9-3: udev 2, busnum 9, minor = 1025 >> [ 1.766038] usb 9-3: New USB device found, idVendor=0471, idProduct=0311 >> [ 1.766244] usb 9-3: New USB device strings: Mfr=0, Product=0, SerialNumber=1 >> [ 1.766448] usb 9-3: SerialNumber: 01680000EA164101 >> [ 1.766811] usb 9-3: usb_probe_device >> [ 1.766813] usb 9-3: configuration #1 chosen from 1 choice >> [ 1.767184] usb 9-3: Successful Endpoint Configure command >> [ 1.769035] usb 9-3: adding 9-3:1.0 (config #1, interface 0) >> [ 1.769151] usb 9-3: adding 9-3:1.1 (config #1, interface 1) >> [ 1.769235] usb 9-3: adding 9-3:1.2 (config #1, interface 2) >> >> [ 4.483174] pwc: Philips PCVC740K (ToUCam Pro)/PCVC840 (ToUCam II) USB webcam detected. >> [ 4.515833] xhci_hcd 0000:03:00.0: WARN: short transfer on control ep >> [ 4.516894] pwc: Registered as video0. >> [ 4.518834] xhci_hcd 0000:03:00.0: WARN: Stalled endpoint >> [ 4.520834] xhci_hcd 0000:03:00.0: WARN: Stalled endpoint >> [ 4.521051] Philips webcam 9-3:1.1: usb_probe_interface >> [ 4.521053] Philips webcam 9-3:1.1: usb_probe_interface - got id >> [ 4.521058] Philips webcam 9-3:1.2: usb_probe_interface >> [ 4.521060] Philips webcam 9-3:1.2: usb_probe_interface - got id >> [ 4.521073] usbcore: registered new interface driver Philips webcam >> >> >> And when trying to actually grab pictures from the device: >> >> [ 12.957593] usb 9-3: Successful Endpoint Configure command >> [ 12.967542] usb 9-3: ep 0x85 - urb len = 0x2580 (9600), addr = 0x7ac74000, num_trbs = 10 >> [ 12.967553] usb 9-3: ep 0x85 - urb len = 0x2580 (9600), addr = 0x7af8c000, num_trbs = 10 >> [ 12.985500] xhci_hcd 0000:03:00.0: WARN Event TRB for slot 1 ep 10 with no TDs queued? >> [ 20.946116] eth1: no IPv6 routers present >> [ 40.029279] usb 9-3: Successful Endpoint Configure command >> [ 40.039186] usb 9-3: ep 0x85 - urb len = 0x2580 (9600), addr = 0x7a814000, num_trbs = 10 >> [ 40.039198] usb 9-3: ep 0x85 - urb len = 0x2580 (9600), addr = 0x7b734000, num_trbs = 10 >> [ 40.057195] xhci_hcd 0000:03:00.0: WARN Event TRB for slot 1 ep 10 with no TDs queued? >> [ 40.216270] usb 9-3: Successful Endpoint Configure command >> [ 40.226183] usb 9-3: ep 0x85 - urb len = 0x2580 (9600), addr = 0x7a9c0000, num_trbs = 10 >> [ 40.226193] usb 9-3: ep 0x85 - urb len = 0x2580 (9600), addr = 0x7a98c000, num_trbs = 10 >> [ 40.245183] xhci_hcd 0000:03:00.0: WARN Event TRB for slot 1 ep 10 with no TDs queued? >> [ 40.399261] usb 9-3: Successful Endpoint Configure command >> [ 40.408210] usb 9-3: ep 0x85 - urb len = 0x2580 (9600), addr = 0x7a9c0000, num_trbs = 10 >> [ 40.408220] usb 9-3: ep 0x85 - urb len = 0x2580 (9600), addr = 0x7a98c000, num_trbs = 10 >> [ 47.145805] xhci_hcd 0000:03:00.0: WARN Event TRB for slot 1 ep 10 with no TDs queued? >> [ 48.076894] usb 9-3: Successful Endpoint Configure command >> [ 48.086805] usb 9-3: ep 0x85 - urb len = 0x2580 (9600), addr = 0x7b180000, num_trbs = 10 >> [ 48.086816] usb 9-3: ep 0x85 - urb len = 0x2580 (9600), addr = 0x7b47c000, num_trbs = 10 >> [ 48.105803] xhci_hcd 0000:03:00.0: WARN Event TRB for slot 1 ep 10 with no TDs queued? >> [ 48.263885] usb 9-3: Successful Endpoint Configure command >> [ 48.273796] usb 9-3: ep 0x85 - urb len = 0x2580 (9600), addr = 0x7bba0000, num_trbs = 10 >> [ 48.273807] usb 9-3: ep 0x85 - urb len = 0x2580 (9600), addr = 0x7af6c000, num_trbs = 10 >> [ 48.292793] xhci_hcd 0000:03:00.0: WARN Event TRB for slot 1 ep 10 with no TDs queued? >> [ 48.446875] usb 9-3: Successful Endpoint Configure command >> [ 48.456784] usb 9-3: ep 0x85 - urb len = 0x2580 (9600), addr = 0x7bba0000, num_trbs = 10 >> [ 48.456794] usb 9-3: ep 0x85 - urb len = 0x2580 (9600), addr = 0x7af6c000, num_trbs = 10 >> [ 51.778648] xhci_hcd 0000:03:00.0: WARN Event TRB for slot 1 ep 10 with no TDs queued? >> >> >> >> >> Saturday, March 13, 2010, 12:25:38 AM, you wrote: >> >> > On Fri, Mar 12, 2010 at 05:43:45PM +0100, Sander Eikelenboom wrote: >> >> Hi Sarah, >> >> >> >> I'm trying to use an USB 1.1 device on a USB 3.0 host controller, but it doesn't seem to work (tested with kernel versions up to 2.6.34-rc1): >> >> - with lsusb I can only see a usb 3.0 root hub (with a USB 2.0 host controller, i'am always seeing the roothubs for lower speeds as well, so maybe this is the problem ?) >> >> - with lsusb I can see the usb 1.1 device connected to the USB 3.0 root hub. >> >> - the driver from the usb 1.1 device get loaded, but it gives errors, and (it's a webcam) doesn't give video. >> >> - the manufacturer claims it should be backwards compatible hardware. >> >> >> >> - Should this work with the current (expirimental) state of the xhci-hcd driver in linux ? >> >> >> >> The hardware is (asus U3S6): >> >> 03:00.0 USB Controller [0c03]: NEC Corporation Device [1033:0194] (rev 03) (prog-if 30) >> >> Subsystem: ASUSTeK Computer Inc. Device [1043:8413] >> >> > From the log files, it looks like your usb 1.1 device is a webcam; is >> > that correct? >> >> >> [ 5.097306] pwc: Philips webcam module version 10.0.13 loaded. >> >> [ 5.097507] pwc: Supports Philips PCA645/646, PCVC675/680/690, PCVC720[40]/730/740/750 & PCVC830/840. >> >> [ 5.097859] pwc: Also supports the Askey VC010, various Logitech Quickcams, Samsung MPC-C10 and MPC-C30, >> >> [ 5.098215] pwc: the Creative WebCam 5 & Pro Ex, SOTEC Afina Eye and Visionite VCS-UC300 and VCS-UM100. >> >> [ 5.098557] pwc: Trace options: 0x0001 >> >> [ 5.098576] Philips webcam 9-3:1.0: usb_probe_interface >> >> [ 5.098578] Philips webcam 9-3:1.0: usb_probe_interface - got id >> > ... >> >> [ 13.116489] pwc: isoc_init() submit_urb 0 failed with error -22 >> >> > Webcams have isochronous endpoints, and the xHCI driver doesn't support >> > isochronous transfers yet. There are patches to add isochronous >> > support, but they're still under going review. They missed the 2.6.34 >> > merge window, so I'm not sure if they'll make it into 2.6.34 or 2.6.35. >> > If you want to try them out, the latest versions of the patches are >> > here: >> >> > http://marc.info/?l=linux-usb&m=126838645617885&w=2 >> > http://marc.info/?l=linux-usb&m=126838648717923&w=2 >> > http://marc.info/?l=linux-usb&m=126838649217932&w=2 >> >> > Let me know if they work for you. >> >> > Sarah Sharp -- Best regards, Sander mailto:linux@xxxxxxxxxxxxxx -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
