...
>
> The patch below is somehow corrupted, and I couldn't figure out why.
>
> Care to regenerate it and send it again?
>
> Sorry for the delay,
>
> greg k-h
Hi
Trying again
Eirik
Adding vbus_pin_inverted so that the usb detect pin can be active high or low depending on HW implementation
also replaced the gpio_get_value(udc->vbus_pin); with a call to vbus_is_present(udc);
This allows the driver to be loaded and save about 0,15W on the consumption.
Signed-off-by: Eirik Aanonsen <eaa@xxxxxxxxxxxxxx>
---
arch/avr32/mach-at32ap/at32ap700x.c | 7 +++++--
drivers/usb/gadget/atmel_usba_udc.c | 5 +++--
drivers/usb/gadget/atmel_usba_udc.h | 1 +
include/linux/usb/atmel_usba_udc.h | 1 +
4 files changed, 10 insertions(+), 4 deletions(-)
diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c
index 1aa1ea5..83d55f0 100644
--- a/arch/avr32/mach-at32ap/at32ap700x.c
+++ b/arch/avr32/mach-at32ap/at32ap700x.c
@@ -1767,10 +1767,13 @@ at32_add_device_usba(unsigned int id, struct usba_platform_data *data)
ARRAY_SIZE(usba0_resource)))
goto out_free_pdev;
- if (data)
+ if (data) {
usba_data.pdata.vbus_pin = data->vbus_pin;
- else
+ usba_data.pdata.vbus_pin_inverted = data->vbus_pin_inverted;
+ } else {
usba_data.pdata.vbus_pin = -EINVAL;
+ usba_data.pdata.vbus_pin_inverted = -EINVAL;
+ }
data = &usba_data.pdata;
data->num_ep = ARRAY_SIZE(at32_usba_ep);
diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c
index 4e970cf..93344d7 100644
--- a/drivers/usb/gadget/atmel_usba_udc.c
+++ b/drivers/usb/gadget/atmel_usba_udc.c
@@ -320,7 +320,7 @@ static inline void usba_cleanup_debugfs(struct usba_udc *udc)
static int vbus_is_present(struct usba_udc *udc)
{
if (gpio_is_valid(udc->vbus_pin))
- return gpio_get_value(udc->vbus_pin);
+ return gpio_get_value(udc->vbus_pin) ^ udc->vbus_pin_inverted;
/* No Vbus detection: Assume always present */
return 1;
@@ -1763,7 +1763,7 @@ static irqreturn_t usba_vbus_irq(int irq, void *devid)
if (!udc->driver)
goto out;
- vbus = gpio_get_value(udc->vbus_pin);
+ vbus = vbus_is_present(udc);
if (vbus != udc->vbus_prev) {
if (vbus) {
toggle_bias(1);
@@ -2000,6 +2000,7 @@ static int __init usba_udc_probe(struct platform_device *pdev)
if (gpio_is_valid(pdata->vbus_pin)) {
if (!gpio_request(pdata->vbus_pin, "atmel_usba_udc")) {
udc->vbus_pin = pdata->vbus_pin;
+ udc->vbus_pin_inverted = pdata->vbus_pin_inverted;
ret = request_irq(gpio_to_irq(udc->vbus_pin),
usba_vbus_irq, 0,
diff --git a/drivers/usb/gadget/atmel_usba_udc.h b/drivers/usb/gadget/atmel_usba_udc.h
index f7baea3..88a2e07 100644
--- a/drivers/usb/gadget/atmel_usba_udc.h
+++ b/drivers/usb/gadget/atmel_usba_udc.h
@@ -323,6 +323,7 @@ struct usba_udc {
struct platform_device *pdev;
int irq;
int vbus_pin;
+ int vbus_pin_inverted;
struct clk *pclk;
struct clk *hclk;
diff --git a/include/linux/usb/atmel_usba_udc.h b/include/linux/usb/atmel_usba_udc.h
index 6311fa2..baf41c8 100644
--- a/include/linux/usb/atmel_usba_udc.h
+++ b/include/linux/usb/atmel_usba_udc.h
@@ -15,6 +15,7 @@ struct usba_ep_data {
struct usba_platform_data {
int vbus_pin;
+ int vbus_pin_inverted;
int num_ep;
struct usba_ep_data ep[0];
};
--
1.5.4.3
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
