usb_phy_init() may return an error code if e.g. its implementation fails
to prepare/enable some clocks. Detect this early. Trying to disable it
later on driver removal would result in a WARNING splat.
And properly rollback on probe error path by calling the counterpart
usb_phy_shutdown().
Found by Linux Verification Center (linuxtesting.org).
Fixes: be9cae2479f4 ("usb: chipidea: imx: Fix ULPI on imx53")
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Fedor Pchelkin <pchelkin@xxxxxxxxx>
---
drivers/usb/chipidea/ci_hdrc_imx.c | 13 ++++++++++---
1 file changed, 10 insertions(+), 3 deletions(-)
diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c
index 3f11ae071c7f..720b998376b9 100644
--- a/drivers/usb/chipidea/ci_hdrc_imx.c
+++ b/drivers/usb/chipidea/ci_hdrc_imx.c
@@ -470,7 +470,11 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev)
of_usb_get_phy_mode(np) == USBPHY_INTERFACE_MODE_ULPI) {
pdata.flags |= CI_HDRC_OVERRIDE_PHY_CONTROL;
data->override_phy_control = true;
- usb_phy_init(pdata.usb_phy);
+ ret = usb_phy_init(pdata.usb_phy);
+ if (ret) {
+ dev_err(dev, "Failed to init phy\n");
+ goto err_clk;
+ }
}
if (pdata.flags & CI_HDRC_SUPPORTS_RUNTIME_PM)
@@ -479,7 +483,7 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev)
ret = imx_usbmisc_init(data->usbmisc_data);
if (ret) {
dev_err(dev, "usbmisc init failed, ret=%d\n", ret);
- goto err_clk;
+ goto phy_shutdown;
}
data->ci_pdev = ci_hdrc_add_device(dev,
@@ -488,7 +492,7 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev)
if (IS_ERR(data->ci_pdev)) {
ret = PTR_ERR(data->ci_pdev);
dev_err_probe(dev, ret, "ci_hdrc_add_device failed\n");
- goto err_clk;
+ goto phy_shutdown;
}
if (data->usbmisc_data) {
@@ -522,6 +526,9 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev)
disable_device:
ci_hdrc_remove_device(data->ci_pdev);
+phy_shutdown:
+ if (data->override_phy_control)
+ usb_phy_shutdown(data->phy);
err_clk:
clk_disable_unprepare(data->clk_wakeup);
err_wakeup_clk:
--
2.48.1
