Hello Fabio,
Il giorno gio 27 feb 2025 alle ore 12:08 Fabio Porcedda
<fabio.porcedda@xxxxxxxxx> ha scritto:
>
> Add the following Telit Cinterion FE990B40 compositions:
>
> 0x10b0: rmnet + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) +
> tty (diag) + DPL + QDSS (Qualcomm Debug SubSystem) + adb
> T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 7 Spd=480 MxCh= 0
> D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
> P: Vendor=1bc7 ProdID=10b0 Rev=05.15
> S: Manufacturer=Telit Cinterion
> S: Product=FE990
> S: SerialNumber=28c2595e
> C: #Ifs= 9 Cfg#= 1 Atr=e0 MxPwr=500mA
> I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
> E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
> I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
> E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
> I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
> E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
> I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
> E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
> I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
> E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
> I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
> E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> I: If#= 6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none)
> E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> I: If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none)
> E: Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> I: If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
> E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
>
> 0x10b1: MBIM + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) +
> tty (diag) + DPL + QDSS (Qualcomm Debug SubSystem) + adb
> T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 8 Spd=480 MxCh= 0
> D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
> P: Vendor=1bc7 ProdID=10b1 Rev=05.15
> S: Manufacturer=Telit Cinterion
> S: Product=FE990
> S: SerialNumber=28c2595e
> C: #Ifs=10 Cfg#= 1 Atr=e0 MxPwr=500mA
> I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
> E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms
> I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
> E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
> E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
> I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
> E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
> I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
> E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
> I: If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
> E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
> I: If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
> E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> I: If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none)
> E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> I: If#= 8 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none)
> E: Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> I: If#= 9 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
> E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
>
> 0x10b2: RNDIS + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) +
> tty (diag) + DPL + QDSS (Qualcomm Debug SubSystem) + adb
> T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 9 Spd=480 MxCh= 0
> D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
> P: Vendor=1bc7 ProdID=10b2 Rev=05.15
> S: Manufacturer=Telit Cinterion
> S: Product=FE990
> S: SerialNumber=28c2595e
> C: #Ifs=10 Cfg#= 1 Atr=e0 MxPwr=500mA
> I: If#= 0 Alt= 0 #EPs= 1 Cls=ef(misc ) Sub=04 Prot=01 Driver=rndis_host
> E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
> I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
> E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
> E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
> I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
> E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
> I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
> E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
> I: If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
> E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
> I: If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
> E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> I: If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none)
> E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> I: If#= 8 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none)
> E: Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> I: If#= 9 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
> E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
>
> 0x10d3: ECM + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) +
> tty (diag) + DPL + QDSS (Qualcomm Debug SubSystem) + adb
Shouldn't this be 0x10b3 ?
The rest looks good to me.
Regards,
Daniele
> T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 11 Spd=480 MxCh= 0
> D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
> P: Vendor=1bc7 ProdID=10b3 Rev=05.15
> S: Manufacturer=Telit Cinterion
> S: Product=FE990
> S: SerialNumber=28c2595e
> C: #Ifs=10 Cfg#= 1 Atr=e0 MxPwr=500mA
> I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether
> E: Ad=82(I) Atr=03(Int.) MxPS= 16 Ivl=32ms
> I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
> E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
> E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
> I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
> E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
> I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
> E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
> I: If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
> E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
> I: If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
> E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> I: If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none)
> E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> I: If#= 8 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none)
> E: Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> I: If#= 9 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
> E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
>
> Cc: stable@xxxxxxxxxxxxxxx
> Signed-off-by: Fabio Porcedda <fabio.porcedda@xxxxxxxxx>
> ---
> drivers/usb/serial/option.c | 16 ++++++++++++++++
> 1 file changed, 16 insertions(+)
>
> diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
> index 58bd54e8c483..8660f7a89b01 100644
> --- a/drivers/usb/serial/option.c
> +++ b/drivers/usb/serial/option.c
> @@ -1388,6 +1388,22 @@ static const struct usb_device_id option_ids[] = {
> .driver_info = RSVD(0) | NCTRL(2) | RSVD(3) | RSVD(4) },
> { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10aa, 0xff), /* Telit FN920C04 (MBIM) */
> .driver_info = NCTRL(3) | RSVD(4) | RSVD(5) },
> + { USB_DEVICE_INTERFACE_PROTOCOL(TELIT_VENDOR_ID, 0x10b0, 0x60) }, /* Telit FE990B (rmnet) */
> + { USB_DEVICE_INTERFACE_PROTOCOL(TELIT_VENDOR_ID, 0x10b0, 0x40) },
> + { USB_DEVICE_INTERFACE_PROTOCOL(TELIT_VENDOR_ID, 0x10b0, 0x30),
> + .driver_info = NCTRL(5) },
> + { USB_DEVICE_INTERFACE_PROTOCOL(TELIT_VENDOR_ID, 0x10b1, 0x60) }, /* Telit FE990B (MBIM) */
> + { USB_DEVICE_INTERFACE_PROTOCOL(TELIT_VENDOR_ID, 0x10b1, 0x40) },
> + { USB_DEVICE_INTERFACE_PROTOCOL(TELIT_VENDOR_ID, 0x10b1, 0x30),
> + .driver_info = NCTRL(6) },
> + { USB_DEVICE_INTERFACE_PROTOCOL(TELIT_VENDOR_ID, 0x10b2, 0x60) }, /* Telit FE990B (RNDIS) */
> + { USB_DEVICE_INTERFACE_PROTOCOL(TELIT_VENDOR_ID, 0x10b2, 0x40) },
> + { USB_DEVICE_INTERFACE_PROTOCOL(TELIT_VENDOR_ID, 0x10b2, 0x30),
> + .driver_info = NCTRL(6) },
> + { USB_DEVICE_INTERFACE_PROTOCOL(TELIT_VENDOR_ID, 0x10b3, 0x60) }, /* Telit FE990B (ECM) */
> + { USB_DEVICE_INTERFACE_PROTOCOL(TELIT_VENDOR_ID, 0x10b3, 0x40) },
> + { USB_DEVICE_INTERFACE_PROTOCOL(TELIT_VENDOR_ID, 0x10b3, 0x30),
> + .driver_info = NCTRL(6) },
> { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10c0, 0xff), /* Telit FE910C04 (rmnet) */
> .driver_info = RSVD(0) | NCTRL(3) },
> { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10c4, 0xff), /* Telit FE910C04 (rmnet) */
> --
> 2.48.1
>
