Re: [PATCH] Logitech G13 driver (fixed cc list --- ignore others)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Jan 14, 2010 at 10:48 PM, Rick L. Vinyard, Jr.
<rvinyard@xxxxxxxxxxx> wrote:
> Miguel Ojeda wrote:
>> On Tue, Jan 5, 2010 at 1:14 AM, Jaya Kumar <jayakumar.lkml@xxxxxxxxx>
>> wrote:
>>> On Tue, Jan 5, 2010 at 6:48 AM, Pavel Machek <pavel@xxxxxx> wrote:
>>>>
>>>> Ok, but I guess you should cc auxdisplay people in future.
>>>
>>> Hi Pavel,
>>>
>>> I just looked at the drivers/auxdisplay directory and got a bit
>>> confused. The reason I got confused is because auxdisplay is actually
>>> an fbdev driver but it is outside of the drivers/video directory. It
>>> looks like there has only been 1 commit and that was for the Samsung
>>> KS0108 controller. It also sort of uses platform support but the way
>>> it is abstracted is odd to my thinking. The controller is ks0108, so
>>> in my mind that would be the code that would be platform independent,
>>> and then that would use a board specific IO driver to push data (eg:
>>> parport or gpio or usb). I think in the long term it would probably
>>> make sense to write a cleaner approach with a drivers/video/ks0108.c
>>> which is cleanly platform independent (and back within fbdev proper)
>>> and then a board specific driver in the appropriate location that
>>> handles the IO.
>>
>> I wrote long ago the driver(s) and people that reviewed it thought it
>> was better to keep it outside. I think that if someone else is going
>> to need ks0108, then I agree: we should write a independent driver.
>>
>> It should not be hard, it is an easy controller to play with and the
>> code is already there. I would try to do it; however, I am not sure if
>> I would be the most appropriate person to code such generic driver, as
>> I know almost nothing about all drivers/video/* stuff and the ways of
>> making it truly generic for future video/ users. Still, I will help
>> gladly.
>>
>
> When I started to look at writing the G13 framebuffer the first code I
> looked at was the cfag12864b, and started off trying to adapt it.
>

I hope it was useful, at least at first. : )

> However, as I was digging through the video/* directory looking for
> something (I forget now what) I came across the hecubafb and patterned the
> G13 after it instead.
>
> In moving between the two, the biggest difference was that I was able to
> strip out alot of the workqueue code you had since all that was provided
> by defio. Otherwise, the general structure was almost identical.
>
> In particular, what would change is the lower half of cfag12864b.c and you
> would be able to eliminate almost everything from the /* Update work */
> and below comment with the exception of cfag12864b_update().
>
> cfag12864b_update() would become almost analogous to the g13_fb_update() I
> have in the G13 driver which is triggered by the deferred_io member of the
> fb_deferred_io structure.
>
> You would have something like:
>
> /* Callback from deferred IO workqueue */
> static void cfag12864b_deferred_io(struct fb_info *info, struct list_head
> *pagelist)
> {
>        cfag12864b_update(info->par);
> }
>
> static struct fb_deferred_io cfag12864b_defio = {
>        .delay = HZ / CFAG12864B_UPDATE_RATE_DEFAULT,
>        .deferred_io = cfag12864b_deferred_io,
> };
>

Thank you for the analysis of cfag12864b. See below.

>
> The other major change is that you could eliminate the periodic memcmp()
> to see if the buffer has change since the deferred_io is only going to
> trigger on a page write fault.

Yeah, I admit the memcmp() is pretty ugly knowing about deferred_io,
which I did not. It is strange that anyone pointed it out long before,
is it new? Are there any known drawbacks?

>
> But, that isn't a major change in the code... only in performance.
>

So less code and greater performance. That sounds like a winning deal!

About ks0108, have you got any thoughts on how to write a generic
driver? Do you need something special about ks0108? I only needed raw
output operations so I just implemented that. Also, cfag12864b uses
two ks0108 controllers and I suppose other LCD's use many more, so
there are many points that may need a "research".

Miguel Ojeda.

> ---
>
> Rick
>
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux