Hi! > > Well, the device is still primarily HID device in its nature, so either > > keeping the whole driver in drivers/hid, or separating it into two > > drivers, one for the HID part and second for the framebuffer part should > > be acceptable. > > The framebuffer part uses the same interrupt endpoint for both HID and > display. IIRC there were issues with two drivers using the same interrupt > endpoint. Ok, but I guess you should cc auxdisplay people in future. > >> I'd prefer to go without another logo. Just make sure default penguin > >> gets > >> there or something. > > > > What logo is this, BTW? :) > > It's similar to the default G13 load image, but with tux on the left and > the GNU gnu on the right. > > I tried to particularly clean up tux a bit since the default monochrome > logo is 80x80 and the display is 160x43. > > The only alternatives I could think of were to use the default logo and > load it at 80x43 which cuts off Tux at the nipples, resample in the > driver, or leave the logo off. Or put something simple&stupid there like checkerboard? Or just resample penguin -- skipping every second line should not be particulary hard... Pavel -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
