> +&cpsw_port1 {
> + phy-mode = "rgmii-rxid";
> + phy-handle = <&cpsw3g_phy0>;
> +};
> +
> +&cpsw_port2 {
> + phy-mode = "rgmii-rxid";
> + phy-handle = <&cpsw3g_phy3>;
> +};
rgmii-rxid is very odd.
> +
> +&cpsw3g_mdio {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&main_mdio1_pins>;
> +
> + cpsw3g_phy0: ethernet-phy@0 {
> + compatible = "ethernet-phy-ieee802.3-c22";
> + reg = <0x0>;
> + reset-gpios = <&main_gpio1 11 GPIO_ACTIVE_LOW>;
> + reset-assert-us = <1000>;
> + reset-deassert-us = <1000>;
> + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
I guess this is the explanation.
What happens when you use rgmii-id, and don't have this delay here?
That would be normal.
Andrew
