Hi,
ASIX AX88772B based USB 10/100 Ethernet adapter doesn't come
up ("carrier off"), despite the built-in 100BASE-FX PHY positive link
indication. The internal PHY is configured (using EEPROM) in fixed
100 Mbps full duplex mode.
The primary problem appears to be using carrier_netif_{on,off}() while,
at the same time, delegating carrier management to phylink. Use only the
latter and remove "manual control" in the asix driver.
Signed-off-by: Krzysztof Hałasa <khalasa@xxxxxxx>
diff --git a/drivers/net/usb/asix.h b/drivers/net/usb/asix.h
index 74162190bccc..8531b804021a 100644
--- a/drivers/net/usb/asix.h
+++ b/drivers/net/usb/asix.h
@@ -224,7 +224,6 @@ int asix_write_rx_ctl(struct usbnet *dev, u16 mode, int in_pm);
u16 asix_read_medium_status(struct usbnet *dev, int in_pm);
int asix_write_medium_mode(struct usbnet *dev, u16 mode, int in_pm);
-void asix_adjust_link(struct net_device *netdev);
int asix_write_gpio(struct usbnet *dev, u16 value, int sleep, int in_pm);
diff --git a/drivers/net/usb/asix_common.c b/drivers/net/usb/asix_common.c
index 72ffc89b477a..7fd763917ae2 100644
--- a/drivers/net/usb/asix_common.c
+++ b/drivers/net/usb/asix_common.c
@@ -414,28 +414,6 @@ int asix_write_medium_mode(struct usbnet *dev, u16 mode, int in_pm)
return ret;
}
-/* set MAC link settings according to information from phylib */
-void asix_adjust_link(struct net_device *netdev)
-{
- struct phy_device *phydev = netdev->phydev;
- struct usbnet *dev = netdev_priv(netdev);
- u16 mode = 0;
-
- if (phydev->link) {
- mode = AX88772_MEDIUM_DEFAULT;
-
- if (phydev->duplex == DUPLEX_HALF)
- mode &= ~AX_MEDIUM_FD;
-
- if (phydev->speed != SPEED_100)
- mode &= ~AX_MEDIUM_PS;
- }
-
- asix_write_medium_mode(dev, mode, 0);
- phy_print_status(phydev);
- usbnet_link_change(dev, phydev->link, 0);
-}
-
int asix_write_gpio(struct usbnet *dev, u16 value, int sleep, int in_pm)
{
int ret;
diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c
index 57d6e5abc30e..af91fc947f40 100644
--- a/drivers/net/usb/asix_devices.c
+++ b/drivers/net/usb/asix_devices.c
@@ -40,22 +40,6 @@ struct ax88172_int_data {
__le16 res3;
} __packed;
-static void asix_status(struct usbnet *dev, struct urb *urb)
-{
- struct ax88172_int_data *event;
- int link;
-
- if (urb->actual_length < 8)
- return;
-
- event = urb->transfer_buffer;
- link = event->link & 0x01;
- if (netif_carrier_ok(dev->net) != link) {
- usbnet_link_change(dev, link, 1);
- netdev_dbg(dev->net, "Link Status is: %d\n", link);
- }
-}
-
static void asix_set_netdev_dev_addr(struct usbnet *dev, u8 *addr)
{
if (is_valid_ether_addr(addr)) {
@@ -752,7 +736,6 @@ static void ax88772_mac_link_down(struct phylink_config *config,
struct usbnet *dev = netdev_priv(to_net_dev(config->dev));
asix_write_medium_mode(dev, 0, 0);
- usbnet_link_change(dev, false, false);
}
static void ax88772_mac_link_up(struct phylink_config *config,
@@ -783,7 +766,6 @@ static void ax88772_mac_link_up(struct phylink_config *config,
m |= AX_MEDIUM_RFC;
asix_write_medium_mode(dev, m, 0);
- usbnet_link_change(dev, true, false);
}
static const struct phylink_mac_ops ax88772_phylink_mac_ops = {
@@ -1309,40 +1291,36 @@ static int ax88178_bind(struct usbnet *dev, struct usb_interface *intf)
static const struct driver_info ax8817x_info = {
.description = "ASIX AX8817x USB 2.0 Ethernet",
.bind = ax88172_bind,
- .status = asix_status,
.link_reset = ax88172_link_reset,
.reset = ax88172_link_reset,
- .flags = FLAG_ETHER | FLAG_LINK_INTR,
+ .flags = FLAG_ETHER,
.data = 0x00130103,
};
static const struct driver_info dlink_dub_e100_info = {
.description = "DLink DUB-E100 USB Ethernet",
.bind = ax88172_bind,
- .status = asix_status,
.link_reset = ax88172_link_reset,
.reset = ax88172_link_reset,
- .flags = FLAG_ETHER | FLAG_LINK_INTR,
+ .flags = FLAG_ETHER,
.data = 0x009f9d9f,
};
static const struct driver_info netgear_fa120_info = {
.description = "Netgear FA-120 USB Ethernet",
.bind = ax88172_bind,
- .status = asix_status,
.link_reset = ax88172_link_reset,
.reset = ax88172_link_reset,
- .flags = FLAG_ETHER | FLAG_LINK_INTR,
+ .flags = FLAG_ETHER,
.data = 0x00130103,
};
static const struct driver_info hawking_uf200_info = {
.description = "Hawking UF200 USB Ethernet",
.bind = ax88172_bind,
- .status = asix_status,
.link_reset = ax88172_link_reset,
.reset = ax88172_link_reset,
- .flags = FLAG_ETHER | FLAG_LINK_INTR,
+ .flags = FLAG_ETHER,
.data = 0x001f1d1f,
};
@@ -1350,10 +1328,9 @@ static const struct driver_info ax88772_info = {
.description = "ASIX AX88772 USB 2.0 Ethernet",
.bind = ax88772_bind,
.unbind = ax88772_unbind,
- .status = asix_status,
.reset = ax88772_reset,
.stop = ax88772_stop,
- .flags = FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR | FLAG_MULTI_PACKET,
+ .flags = FLAG_ETHER | FLAG_FRAMING_AX | FLAG_MULTI_PACKET,
.rx_fixup = asix_rx_fixup_common,
.tx_fixup = asix_tx_fixup,
};
@@ -1362,11 +1339,9 @@ static const struct driver_info ax88772b_info = {
.description = "ASIX AX88772B USB 2.0 Ethernet",
.bind = ax88772_bind,
.unbind = ax88772_unbind,
- .status = asix_status,
.reset = ax88772_reset,
.stop = ax88772_stop,
- .flags = FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR |
- FLAG_MULTI_PACKET,
+ .flags = FLAG_ETHER | FLAG_FRAMING_AX | FLAG_MULTI_PACKET,
.rx_fixup = asix_rx_fixup_common,
.tx_fixup = asix_tx_fixup,
.data = FLAG_EEPROM_MAC,
@@ -1376,11 +1351,9 @@ static const struct driver_info lxausb_t1l_info = {
.description = "Linux Automation GmbH USB 10Base-T1L",
.bind = ax88772_bind,
.unbind = ax88772_unbind,
- .status = asix_status,
.reset = ax88772_reset,
.stop = ax88772_stop,
- .flags = FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR |
- FLAG_MULTI_PACKET,
+ .flags = FLAG_ETHER | FLAG_FRAMING_AX | FLAG_MULTI_PACKET,
.rx_fixup = asix_rx_fixup_common,
.tx_fixup = asix_tx_fixup,
.data = FLAG_EEPROM_MAC,
@@ -1390,11 +1363,9 @@ static const struct driver_info ax88178_info = {
.description = "ASIX AX88178 USB 2.0 Ethernet",
.bind = ax88178_bind,
.unbind = ax88178_unbind,
- .status = asix_status,
.link_reset = ax88178_link_reset,
.reset = ax88178_reset,
- .flags = FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR |
- FLAG_MULTI_PACKET,
+ .flags = FLAG_ETHER | FLAG_FRAMING_AX | FLAG_MULTI_PACKET,
.rx_fixup = asix_rx_fixup_common,
.tx_fixup = asix_tx_fixup,
};
@@ -1412,10 +1383,8 @@ static const struct driver_info hg20f9_info = {
.description = "HG20F9 USB 2.0 Ethernet",
.bind = ax88772_bind,
.unbind = ax88772_unbind,
- .status = asix_status,
.reset = ax88772_reset,
- .flags = FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR |
- FLAG_MULTI_PACKET,
+ .flags = FLAG_ETHER | FLAG_FRAMING_AX | FLAG_MULTI_PACKET,
.rx_fixup = asix_rx_fixup_common,
.tx_fixup = asix_tx_fixup,
.data = FLAG_EEPROM_MAC,
--
Krzysztof "Chris" Hałasa
Sieć Badawcza Łukasiewicz
Przemysłowy Instytut Automatyki i Pomiarów PIAP
Al. Jerozolimskie 202, 02-486 Warszawa
