Re: [PATCH v5 1/6] dt-bindings: usb: Add Parade PS8830 Type-C retimer bindings

[Rob Herring <robh@xxxxxxxxxx>]

On Tue, Nov 12, 2024 at 07:01:10PM +0200, Abel Vesa wrote:
> The Parade PS8830 is a USB4, DisplayPort and Thunderbolt 4 retimer,
> controlled over I2C. It usually sits between a USB/DisplayPort PHY and the
> Type-C connector, and provides orientation and altmode handling.
> 
> Currently, it is found on all boards featuring the Qualcomm Snapdragon
> X Elite SoCs.
> 
> Document bindings for its new driver. Future-proof the schema for the
> PS8833 variant, which seems to be similar to PS8830.
> 
> Signed-off-by: Abel Vesa <abel.vesa@xxxxxxxxxx>
> ---
>  .../devicetree/bindings/usb/parade,ps8830.yaml     | 119 +++++++++++++++++++++
>  1 file changed, 119 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/usb/parade,ps8830.yaml b/Documentation/devicetree/bindings/usb/parade,ps8830.yaml
> new file mode 100644
> index 0000000000000000000000000000000000000000..2f20d20a2bdfe2499588dc621c14cd16ab159002
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/usb/parade,ps8830.yaml
> @@ -0,0 +1,119 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/usb/parade,ps8830.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Parade PS883x USB and DisplayPort Retimer
> +
> +maintainers:
> +  - Abel Vesa <abel.vesa@xxxxxxxxxx>
> +
> +properties:
> +  compatible:
> +    enum:
> +      - parade,ps8830
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    items:
> +      - description: XO Clock
> +
> +  reset-gpios:
> +    maxItems: 1
> +
> +  vdd-supply:
> +    description: power supply (1.07V)
> +
> +  vdd33-supply:
> +    description: power supply (3.3V)
> +
> +  vdd33-cap-supply:
> +    description: power supply (3.3V)
> +
> +  vddar-supply:
> +    description: power supply (1.07V)
> +
> +  vddat-supply:
> +    description: power supply (1.07V)
> +
> +  vddio-supply:
> +    description: power supply (1.2V or 1.8V)
> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - reset-gpios
> +  - vdd-supply
> +  - vdd33-supply
> +  - vdd33-cap-supply
> +  - vddat-supply
> +  - vddio-supply
> +  - orientation-switch
> +  - retimer-switch
> +
> +allOf:
> +  - $ref: usb-switch.yaml#
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +
> +    i2c {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        typec-mux@8 {
> +            compatible = "parade,ps8830";
> +            reg = <0x8>;
> +
> +            clocks = <&clk_rtmr_xo>;
> +
> +            vdd-supply = <&vreg_rtmr_1p15>;
> +            vdd33-supply = <&vreg_rtmr_3p3>;
> +            vdd33-cap-supply = <&vreg_rtmr_3p3>;
> +            vddar-supply = <&vreg_rtmr_1p15>;
> +            vddat-supply = <&vreg_rtmr_1p15>;
> +            vddio-supply = <&vreg_rtmr_1p8>;
> +
> +            reset-gpios = <&tlmm 10 GPIO_ACTIVE_LOW>;
> +
> +            retimer-switch;
> +            orientation-switch;
> +
> +            ports {
> +                #address-cells = <1>;
> +                #size-cells = <0>;
> +
> +                port@0 {
> +                    reg = <0>;
> +
> +                    endpoint {
> +                        remote-endpoint = <&typec_con_ss>;
> +                    };
> +                };
> +
> +                port@1 {
> +                    reg = <1>;
> +
> +                    endpoint {
> +                        remote-endpoint = <&usb_phy_ss>;
> +                    };
> +                };
> +
> +                port@2 {

No such port defined in usb-switch.yaml and you didn't define it here.

> +                    reg = <2>;
> +
> +                    endpoint {
> +                        remote-endpoint = <&typec_dp_aux>;
> +                    };
> +                };
> +            };
> +        };
> +    };
> +...
> 
> -- 
> 2.34.1
>