The X Elite CRD board comes with 3 Parade PS8830 retimers, one for each
Type-C port. These handle the orientation and altmode switching and are
controlled over I2C. In the connection chain, they sit between the
USB/DisplayPort combo PHY and the Type-C connector.
Describe the retimers and all gpio controlled voltage regulators used by
each retimer. Also, modify the pmic glink graph to include the retimers in
between the SuperSpeed/Sideband in endpoints and the QMP PHY out endpoints.
Signed-off-by: Abel Vesa <abel.vesa@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/x1e80100-crd.dts | 450 +++++++++++++++++++++++++++++-
1 file changed, 444 insertions(+), 6 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
index 39f9d9cdc10d8e79824b72288e2529536144fa9e..659520404adec33c3551f8d0a5ae3db9e0a18d44 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
+++ b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
@@ -100,7 +100,15 @@ port@1 {
reg = <1>;
pmic_glink_ss0_ss_in: endpoint {
- remote-endpoint = <&usb_1_ss0_qmpphy_out>;
+ remote-endpoint = <&retimer_ss0_ss_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ pmic_glink_ss0_con_sbu_in: endpoint {
+ remote-endpoint = <&retimer_ss0_con_sbu_out>;
};
};
};
@@ -129,7 +137,15 @@ port@1 {
reg = <1>;
pmic_glink_ss1_ss_in: endpoint {
- remote-endpoint = <&usb_1_ss1_qmpphy_out>;
+ remote-endpoint = <&retimer_ss1_ss_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ pmic_glink_ss1_con_sbu_in: endpoint {
+ remote-endpoint = <&retimer_ss1_con_sbu_out>;
};
};
};
@@ -158,7 +174,15 @@ port@1 {
reg = <1>;
pmic_glink_ss2_ss_in: endpoint {
- remote-endpoint = <&usb_1_ss2_qmpphy_out>;
+ remote-endpoint = <&retimer_ss2_ss_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ pmic_glink_ss2_con_sbu_in: endpoint {
+ remote-endpoint = <&retimer_ss2_con_sbu_out>;
};
};
};
@@ -311,6 +335,150 @@ vreg_nvme: regulator-nvme {
regulator-boot-on;
};
+ vreg_rtmr0_1p15: regulator-rtmr0-1p15 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_RTMR0_1P15";
+ regulator-min-microvolt = <1150000>;
+ regulator-max-microvolt = <1150000>;
+
+ gpio = <&pmc8380_5_gpios 8 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&usb0_pwr_1p15_reg_en>;
+ pinctrl-names = "default";
+
+ regulator-boot-on;
+ };
+
+ vreg_rtmr0_1p8: regulator-rtmr0-1p8 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_RTMR0_1P8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ gpio = <&pm8550ve_9_gpios 8 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&usb0_1p8_reg_en>;
+ pinctrl-names = "default";
+
+ regulator-boot-on;
+ };
+
+ vreg_rtmr0_3p3: regulator-rtmr0-3p3 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_RTMR0_3P3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&pm8550_gpios 11 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&usb0_3p3_reg_en>;
+ pinctrl-names = "default";
+
+ regulator-boot-on;
+ };
+
+ vreg_rtmr1_1p15: regulator-rtmr1-1p15 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_RTMR1_1P15";
+ regulator-min-microvolt = <1150000>;
+ regulator-max-microvolt = <1150000>;
+
+ gpio = <&tlmm 188 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&usb1_pwr_1p15_reg_en>;
+ pinctrl-names = "default";
+
+ regulator-boot-on;
+ };
+
+ vreg_rtmr1_1p8: regulator-rtmr1-1p8 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_RTMR1_1P8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ gpio = <&tlmm 175 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&usb1_pwr_1p8_reg_en>;
+ pinctrl-names = "default";
+
+ regulator-boot-on;
+ };
+
+ vreg_rtmr1_3p3: regulator-rtmr1-3p3 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_RTMR1_3P3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&tlmm 186 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&usb1_pwr_3p3_reg_en>;
+ pinctrl-names = "default";
+
+ regulator-boot-on;
+ };
+
+ vreg_rtmr2_1p15: regulator-rtmr2-1p15 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_RTMR2_1P15";
+ regulator-min-microvolt = <1150000>;
+ regulator-max-microvolt = <1150000>;
+
+ gpio = <&tlmm 189 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&usb2_pwr_1p15_reg_en>;
+ pinctrl-names = "default";
+
+ regulator-boot-on;
+ };
+
+ vreg_rtmr2_1p8: regulator-rtmr2-1p8 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_RTMR2_1P8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ gpio = <&tlmm 126 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&usb2_pwr_1p8_reg_en>;
+ pinctrl-names = "default";
+
+ regulator-boot-on;
+ };
+
+ vreg_rtmr2_3p3: regulator-rtmr2-3p3 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_RTMR2_3P3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&tlmm 187 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&usb2_pwr_3p3_reg_en>;
+ pinctrl-names = "default";
+
+ regulator-boot-on;
+ };
+
vph_pwr: regulator-vph-pwr {
compatible = "regulator-fixed";
@@ -735,6 +903,178 @@ keyboard@3a {
};
};
+&i2c1 {
+ clock-frequency = <400000>;
+
+ status = "okay";
+
+ typec-mux@8 {
+ compatible = "parade,ps8830";
+ reg = <0x08>;
+
+ clocks = <&rpmhcc RPMH_RF_CLK5>;
+
+ vdd-supply = <&vreg_rtmr2_1p15>;
+ vdd33-supply = <&vreg_rtmr2_3p3>;
+ vdd33-cap-supply = <&vreg_rtmr2_3p3>;
+ vddar-supply = <&vreg_rtmr2_1p15>;
+ vddat-supply = <&vreg_rtmr2_1p15>;
+ vddio-supply = <&vreg_rtmr2_1p8>;
+
+ reset-gpios = <&tlmm 185 GPIO_ACTIVE_LOW>;
+
+ pinctrl-0 = <&rtmr2_default>;
+ pinctrl-names = "default";
+
+ orientation-switch;
+ retimer-switch;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ retimer_ss2_ss_out: endpoint {
+ remote-endpoint = <&pmic_glink_ss2_ss_in>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ retimer_ss2_ss_in: endpoint {
+ remote-endpoint = <&usb_1_ss2_qmpphy_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ retimer_ss2_con_sbu_out: endpoint {
+ remote-endpoint = <&pmic_glink_ss2_con_sbu_in>;
+ };
+ };
+ };
+ };
+};
+
+&i2c3 {
+ clock-frequency = <400000>;
+
+ status = "okay";
+
+ typec-mux@8 {
+ compatible = "parade,ps8830";
+ reg = <0x08>;
+
+ clocks = <&rpmhcc RPMH_RF_CLK3>;
+
+ vdd-supply = <&vreg_rtmr0_1p15>;
+ vdd33-supply = <&vreg_rtmr0_3p3>;
+ vdd33-cap-supply = <&vreg_rtmr0_3p3>;
+ vddar-supply = <&vreg_rtmr0_1p15>;
+ vddat-supply = <&vreg_rtmr0_1p15>;
+ vddio-supply = <&vreg_rtmr0_1p8>;
+
+ reset-gpios = <&pm8550_gpios 10 GPIO_ACTIVE_LOW>;
+
+ pinctrl-0 = <&rtmr0_default>;
+ pinctrl-names = "default";
+
+ retimer-switch;
+ orientation-switch;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ retimer_ss0_ss_out: endpoint {
+ remote-endpoint = <&pmic_glink_ss0_ss_in>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ retimer_ss0_ss_in: endpoint {
+ remote-endpoint = <&usb_1_ss0_qmpphy_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ retimer_ss0_con_sbu_out: endpoint {
+ remote-endpoint = <&pmic_glink_ss0_con_sbu_in>;
+ };
+ };
+ };
+ };
+};
+
+&i2c7 {
+ clock-frequency = <400000>;
+
+ status = "okay";
+
+ typec-mux@8 {
+ compatible = "parade,ps8830";
+ reg = <0x8>;
+
+ clocks = <&rpmhcc RPMH_RF_CLK4>;
+
+ vdd-supply = <&vreg_rtmr1_1p15>;
+ vdd33-supply = <&vreg_rtmr1_3p3>;
+ vdd33-cap-supply = <&vreg_rtmr1_3p3>;
+ vddar-supply = <&vreg_rtmr1_1p15>;
+ vddat-supply = <&vreg_rtmr1_1p15>;
+ vddio-supply = <&vreg_rtmr1_1p8>;
+
+ reset-gpios = <&tlmm 176 GPIO_ACTIVE_LOW>;
+
+ pinctrl-0 = <&rtmr1_default>;
+ pinctrl-names = "default";
+
+ retimer-switch;
+ orientation-switch;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ retimer_ss1_ss_out: endpoint {
+ remote-endpoint = <&pmic_glink_ss1_ss_in>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ retimer_ss1_ss_in: endpoint {
+ remote-endpoint = <&usb_1_ss1_qmpphy_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ retimer_ss1_con_sbu_out: endpoint {
+ remote-endpoint = <&pmic_glink_ss1_con_sbu_in>;
+ };
+ };
+
+ };
+ };
+};
+
&i2c8 {
clock-frequency = <400000>;
@@ -883,6 +1223,26 @@ &pcie6a_phy {
status = "okay";
};
+&pm8550_gpios {
+ rtmr0_default: rtmr0-reset-n-active-state {
+ pins = "gpio10";
+ function = "normal";
+ power-source = <1>; /* 1.8V */
+ bias-disable;
+ input-disable;
+ output-enable;
+ };
+
+ usb0_3p3_reg_en: usb0-3p3-reg-en-state {
+ pins = "gpio11";
+ function = "normal";
+ power-source = <1>; /* 1.8V */
+ bias-disable;
+ input-disable;
+ output-enable;
+ };
+};
+
&pm8550ve_8_gpios {
misc_3p3_reg_en: misc-3p3-reg-en-state {
pins = "gpio6";
@@ -896,6 +1256,17 @@ misc_3p3_reg_en: misc-3p3-reg-en-state {
};
};
+&pm8550ve_9_gpios {
+ usb0_1p8_reg_en: usb0-1p8-reg-en-state {
+ pins = "gpio8";
+ function = "normal";
+ power-source = <1>; /* 1.8V */
+ bias-disable;
+ input-disable;
+ output-enable;
+ };
+};
+
&pmc8380_3_gpios {
edp_bl_en: edp-bl-en-state {
pins = "gpio4";
@@ -906,6 +1277,17 @@ edp_bl_en: edp-bl-en-state {
};
};
+&pmc8380_5_gpios {
+ usb0_pwr_1p15_reg_en: usb0-pwr-1p15-reg-en-state {
+ pins = "gpio8";
+ function = "normal";
+ power-source = <1>; /* 1.8V */
+ bias-disable;
+ input-disable;
+ output-enable;
+ };
+};
+
&qupv3_0 {
status = "okay";
};
@@ -1135,6 +1517,20 @@ wake-n-pins {
};
};
+ rtmr1_default: rtmr1-reset-n-active-state {
+ pins = "gpio176";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ rtmr2_default: rtmr2-reset-n-active-state {
+ pins = "gpio185";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
tpad_default: tpad-default-state {
pins = "gpio3";
function = "gpio";
@@ -1156,6 +1552,48 @@ reset-n-pins {
};
};
+ usb1_pwr_1p15_reg_en: usb1-pwr-1p15-reg-en-state {
+ pins = "gpio188";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ usb1_pwr_1p8_reg_en: usb1-pwr-1p8-reg-en-state {
+ pins = "gpio175";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ usb1_pwr_3p3_reg_en: usb1-pwr-3p3-reg-en-state {
+ pins = "gpio186";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ usb2_pwr_1p15_reg_en: usb2-pwr-1p15-reg-en-state {
+ pins = "gpio189";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ usb2_pwr_1p8_reg_en: usb2-pwr-1p8-reg-en-state {
+ pins = "gpio126";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ usb2_pwr_3p3_reg_en: usb2-pwr-3p3-reg-en-state {
+ pins = "gpio187";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
wcd_default: wcd-reset-n-active-state {
pins = "gpio191";
function = "gpio";
@@ -1202,7 +1640,7 @@ &usb_1_ss0_dwc3_hs {
};
&usb_1_ss0_qmpphy_out {
- remote-endpoint = <&pmic_glink_ss0_ss_in>;
+ remote-endpoint = <&retimer_ss0_ss_in>;
};
&usb_1_ss1_hsphy {
@@ -1230,7 +1668,7 @@ &usb_1_ss1_dwc3_hs {
};
&usb_1_ss1_qmpphy_out {
- remote-endpoint = <&pmic_glink_ss1_ss_in>;
+ remote-endpoint = <&retimer_ss1_ss_in>;
};
&usb_1_ss2_hsphy {
@@ -1258,5 +1696,5 @@ &usb_1_ss2_dwc3_hs {
};
&usb_1_ss2_qmpphy_out {
- remote-endpoint = <&pmic_glink_ss2_ss_in>;
+ remote-endpoint = <&retimer_ss2_ss_in>;
};
--
2.34.1
