From: Niklas Neronin <niklas.neronin@xxxxxxxxxxxxxxx> Variable 'max_interrupters' contains the maximum supported interrupters or the maximum interrupters the user has requested. Thus, it should be used instead of HCS_MAX_INTRS(). User set 'max_interrupters' value is validated in xhci_gen_setup(), otherwise 'max_interrupters' value is 'HCS_MAX_INTRS(xhci->hcs_params1)'. Signed-off-by: Niklas Neronin <niklas.neronin@xxxxxxxxxxxxxxx> Signed-off-by: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx> --- drivers/usb/host/xhci-pci.c | 11 ++++------- 1 file changed, 4 insertions(+), 7 deletions(-) diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index b1f4dd3f9eff..47c4f70793e4 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -149,14 +149,11 @@ static int xhci_try_enable_msi(struct usb_hcd *hcd) hcd->irq = 0; /* - * calculate number of MSI-X vectors supported. - * - HCS_MAX_INTRS: the max number of interrupts the host can handle, - * with max number of interrupters based on the xhci HCSPARAMS1. - * - num_online_cpus: maximum MSI-X vectors per CPUs core. - * Add additional 1 vector to ensure always available interrupt. + * Calculate number of MSI/MSI-X vectors supported. + * - max_interrupters: the max number of interrupts requested, capped to xhci HCSPARAMS1. + * - num_online_cpus: one vector per CPUs core, with at least one overall. */ - xhci->nvecs = min(num_online_cpus() + 1, - HCS_MAX_INTRS(xhci->hcs_params1)); + xhci->nvecs = min(num_online_cpus() + 1, xhci->max_interrupters); /* TODO: Check with MSI Soc for sysdev */ xhci->nvecs = pci_alloc_irq_vectors(pdev, 1, xhci->nvecs, -- 2.25.1
