On Thu, Oct 24, 2024 at 05:09:19PM +0200, Benoît Monin wrote: > Add support for Quectel RG650V which is based on Qualcomm SDX65 chip. > The composition is DIAG / NMEA / AT / AT / QMI. > > T: Bus=02 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 4 Spd=5000 MxCh= 0 > D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 > P: Vendor=2c7c ProdID=0122 Rev=05.15 > S: Manufacturer=Quectel > S: Product=RG650V-EU > S: SerialNumber=xxxxxxx > C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=896mA > I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option > E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms > E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms > I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option > E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms > E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms > I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option > E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms > E: Ad=83(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms > E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=9ms > I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option > E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms > E: Ad=85(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms > E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=9ms > I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan > E: Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms > E: Ad=87(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms > E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=9ms > Signed-off-by: Benoît Monin <benoit.monin@xxxxxx> Next time make sure to add an empty line before your SoB. Applied, thanks. Johan