This reverts commit ec6ce7075ef879b91a8710829016005dc8170f17.
Fix install of WinUSB dsriver using OS descriptors. Without the fix the drivers are not installed correctly
and the property 'DeviceInterfaceGUID' is missing on host side.
The original change was based on assumption that the interface number is in the high byte of wValue but it is in the low byte, instead.
Unfortunately, the fix is based on MS documentation which is also wrong.
The actual USB request for OS descriptors (using USB analyzer) looks like:
Offset 0 1 2 3 4 5 6 7
0x000 C1 A1 02 00 05 00 0A 00
C1: bmRequestType (device to host, vendor, interface)
A1: nas magic number
0002: wValue (2: nas interface)
0005: wIndex (5: get extended property i.e. nas interface GUID)
008E: wLength (142)
The fix was tested on Windows 10 and Windows 11.
Signed-off-by: Michal Vrastil <michal.vrastil@xxxxxxxxxxxxx>
---
drivers/usb/gadget/composite.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index 17ae3b394469..a3106b179562 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -1925,7 +1925,7 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
buf[5] = 0x01;
switch (ctrl->bRequestType & USB_RECIP_MASK) {
case USB_RECIP_DEVICE:
- if (w_index != 0x4 || (w_value & 0xff))
+ if (w_index != 0x4 || (w_value >> 8))
break;
buf[6] = w_index;
/* Number of ext compat interfaces */
@@ -1941,9 +1941,9 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
}
break;
case USB_RECIP_INTERFACE:
- if (w_index != 0x5 || (w_value & 0xff))
+ if (w_index != 0x5 || (w_value >> 8))
break;
- interface = w_value >> 8;
+ interface = w_value & 0xFF;
if (interface >= MAX_CONFIG_INTERFACES ||
!os_desc_cfg->interface[interface])
break;
--
2.43.0
