Hello Johan,
Il giorno gio 27 giu 2024 alle ore 09:17 Johan Hovold
<johan@xxxxxxxxxx> ha scritto:
>
> On Thu, May 30, 2024 at 10:00:53AM +0200, Daniele Palmas wrote:
> > Add the following core-dump composition, used in different Telit modems:
> >
> > 0x9000: tty (sahara)
> > T: Bus=03 Lev=01 Prnt=03 Port=07 Cnt=01 Dev#= 41 Spd=480 MxCh= 0
> > D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
> > P: Vendor=1bc7 ProdID=9000 Rev=00.00
> > S: Manufacturer=Telit Cinterion
> > S: Product=FN990-dump
> > S: SerialNumber=e815bdde
> > C: #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=2mA
> > I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=10 Driver=option
> > E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> > E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> >
> > Signed-off-by: Daniele Palmas <dnlplm@xxxxxxxxx>
> > ---
> > drivers/usb/serial/option.c | 2 ++
> > 1 file changed, 2 insertions(+)
> >
> > diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
> > index 8a5846d4adf6..a58dd4ef461b 100644
> > --- a/drivers/usb/serial/option.c
> > +++ b/drivers/usb/serial/option.c
> > @@ -1433,6 +1433,8 @@ static const struct usb_device_id option_ids[] = {
> > .driver_info = NCTRL(2) },
> > { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x701b, 0xff), /* Telit LE910R1 (ECM) */
> > .driver_info = NCTRL(2) },
> > + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x9000, 0xff), /* Telit generic core-dump device */
> > + .driver_info = NCTRL(0) },
>
> ZLP not needed like for the other flashing device entries?
not needed for this one.
Thanks,
Daniele
>
> > { USB_DEVICE(TELIT_VENDOR_ID, 0x9010), /* Telit SBL FN980 flashing device */
> > .driver_info = NCTRL(0) | ZLP },
> > { USB_DEVICE(TELIT_VENDOR_ID, 0x9200), /* Telit LE910S1 flashing device */
>
> Johan
