[PATCH 1/1] USB: serial: option: add Telit generic core-dump composition

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add the following core-dump composition, used in different Telit modems:

0x9000: tty (sahara)
T:  Bus=03 Lev=01 Prnt=03 Port=07 Cnt=01 Dev#= 41 Spd=480  MxCh= 0
D:  Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1bc7 ProdID=9000 Rev=00.00
S:  Manufacturer=Telit Cinterion
S:  Product=FN990-dump
S:  SerialNumber=e815bdde
C:  #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=2mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=10 Driver=option
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Signed-off-by: Daniele Palmas <dnlplm@xxxxxxxxx>
---
 drivers/usb/serial/option.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 8a5846d4adf6..a58dd4ef461b 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1433,6 +1433,8 @@ static const struct usb_device_id option_ids[] = {
 	  .driver_info = NCTRL(2) },
 	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x701b, 0xff),	/* Telit LE910R1 (ECM) */
 	  .driver_info = NCTRL(2) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x9000, 0xff),	/* Telit generic core-dump device */
+	  .driver_info = NCTRL(0) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, 0x9010),				/* Telit SBL FN980 flashing device */
 	  .driver_info = NCTRL(0) | ZLP },
 	{ USB_DEVICE(TELIT_VENDOR_ID, 0x9200),				/* Telit LE910S1 flashing device */
-- 
2.37.1





[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux